@@ -539,6 +539,7 @@ struct mt76_testmode_data {
u8 tx_ltf;
u8 tx_antenna_mask;
+ u8 tx_spe_idx;
u32 freq_offset;
@@ -205,6 +205,7 @@ mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
{
static const u8 spe_idx_map[] = {0, 0, 1, 0, 3, 2, 4, 0,
9, 8, 6, 10, 16, 12, 18, 0};
+ struct mt76_testmode_data *td = &phy->mt76->test;
struct sk_buff *skb = phy->mt76->test.tx_skb;
struct mt7915_dev *dev = phy->dev;
struct ieee80211_tx_info *info;
@@ -212,17 +213,21 @@ mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
mt7915_tm_set_trx(phy, TM_MAC_RX_RXV, false);
if (en) {
- u8 tx_ant = phy->mt76->test.tx_antenna_mask;
-
mutex_unlock(&dev->mt76.mutex);
mt7915_set_channel(phy);
mutex_lock(&dev->mt76.mutex);
mt7915_mcu_set_chan_info(phy, MCU_EXT_CMD_SET_RX_PATH);
- if (phy != &dev->phy)
- tx_ant >>= 2;
- phy->test.spe_idx = spe_idx_map[tx_ant];
+ if (td->tx_spe_idx) {
+ phy->test.spe_idx = td->tx_spe_idx;
+ } else {
+ u8 tx_ant = td->tx_antenna_mask;
+
+ if (phy != &dev->phy)
+ tx_ant >>= 2;
+ phy->test.spe_idx = spe_idx_map[tx_ant];
+ }
}
mt7915_tm_set_trx(phy, TM_MAC_TX, en);
@@ -14,6 +14,7 @@ static const struct nla_policy mt76_tm_policy[NUM_MT76_TM_ATTRS] = {
[MT76_TM_ATTR_TX_RATE_STBC] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_LTF] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_ANTENNA] = { .type = NLA_U8 },
+ [MT76_TM_ATTR_TX_SPE_IDX] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_POWER_CONTROL] = { .type = NLA_U8 },
[MT76_TM_ATTR_TX_POWER] = { .type = NLA_NESTED },
[MT76_TM_ATTR_FREQ_OFFSET] = { .type = NLA_U32 },
@@ -359,6 +360,7 @@ int mt76_testmode_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_LTF], &td->tx_ltf, 0, 2) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_ANTENNA], &td->tx_antenna_mask,
1 << (ext_phy * 2), phy->antenna_mask << (ext_phy * 2)) ||
+ mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_SPE_IDX], &td->tx_spe_idx, 0, 27) ||
mt76_tm_get_u8(tb[MT76_TM_ATTR_TX_POWER_CONTROL],
&td->tx_power_control, 0, 1))
goto out;
@@ -499,6 +501,8 @@ int mt76_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *msg,
nla_put_u8(msg, MT76_TM_ATTR_TX_LTF, td->tx_ltf)) ||
(mt76_testmode_param_present(td, MT76_TM_ATTR_TX_ANTENNA) &&
nla_put_u8(msg, MT76_TM_ATTR_TX_ANTENNA, td->tx_antenna_mask)) ||
+ (mt76_testmode_param_present(td, MT76_TM_ATTR_TX_SPE_IDX) &&
+ nla_put_u8(msg, MT76_TM_ATTR_TX_SPE_IDX, td->tx_spe_idx)) ||
(mt76_testmode_param_present(td, MT76_TM_ATTR_TX_POWER_CONTROL) &&
nla_put_u8(msg, MT76_TM_ATTR_TX_POWER_CONTROL, td->tx_power_control)) ||
(mt76_testmode_param_present(td, MT76_TM_ATTR_FREQ_OFFSET) &&
@@ -29,6 +29,7 @@
* @MT76_TM_ATTR_TX_LTF: packet tx LTF, set 0 to 2 for 1x, 2x, and 4x LTF (u8)
*
* @MT76_TM_ATTR_TX_ANTENNA: tx antenna mask (u8)
+ * @MT76_TM_ATTR_TX_SPE_IDX: tx spatial extension index (u8)
* @MT76_TM_ATTR_TX_POWER_CONTROL: enable tx power control (u8)
* @MT76_TM_ATTR_TX_POWER: per-antenna tx power array (nested, u8 attrs)
*
@@ -56,6 +57,7 @@ enum mt76_testmode_attr {
MT76_TM_ATTR_TX_LTF,
MT76_TM_ATTR_TX_ANTENNA,
+ MT76_TM_ATTR_TX_SPE_IDX,
MT76_TM_ATTR_TX_POWER_CONTROL,
MT76_TM_ATTR_TX_POWER,
Add spatial extension (spe) index as a configurable parameter in testmode. This is used for specifically configuring TX path, such as different WF TX priority, number of antennas and spatial streams. If spe_idx is not set, TX path depends on tx_antenna_mask; otherwise, both spe_idx and tx_antenna_mask are referenced to decide TX path. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt76.h | 1 + .../net/wireless/mediatek/mt76/mt7915/testmode.c | 15 ++++++++++----- drivers/net/wireless/mediatek/mt76/testmode.c | 4 ++++ drivers/net/wireless/mediatek/mt76/testmode.h | 2 ++ 4 files changed, 17 insertions(+), 5 deletions(-)