| Message ID | 20210105131725.1191046-1-dwlsalmeida@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v4l-utils] test-media: add support for vidtv | expand |
Hi Daniel, On 05/01/2021 14:17, Daniel W. S. Almeida wrote: > From: "Daniel W. S. Almeida" <dwlsalmeida@gmail.com> > > Add support for vidtv at the test-media script so that automated testing > is possible. Proper compliance tests are still pending. I've tried this, but something is wrong: 'media-ctl -p' shows an empty topology, ditto with contrib/test/mc_nextgen_test. For the same reason 'v4l2-compliance -M0' fails with: fail: v4l2-test-media.cpp(120): !topology.num_entities I'm not sure what's going on here, but it needs some more work. In the meantime I'll merge this patch since it doesn't hurt. Regards, Hans > > Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com> > --- > contrib/test/test-media | 72 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 72 insertions(+) > > diff --git a/contrib/test/test-media b/contrib/test/test-media > index 1c1d2e37b..86a2e081a 100755 > --- a/contrib/test/test-media > +++ b/contrib/test/test-media > @@ -4,6 +4,7 @@ > # > # Copyright 2019 Cisco Systems, Inc. and/or its affiliates. All rights reserved. > > +vidtv=0 > vivid=0 > vim2m=0 > vimc=0 > @@ -51,6 +52,7 @@ if [ -z "$1" ]; then > echo "-32: use v4l2-ctl-32 and v4l2-compliance-32 to test the 32 bit compat layer" > echo > echo Test Targets: > + echo "vidtv: test the vidtv driver" > echo "vivid: test the vivid driver" > echo "vim2m: test the vim2m driver" > echo "vimc: test the vimc driver" > @@ -96,6 +98,7 @@ while [ ! -z "$1" ]; do > fi > ;; > all) > + vidtv=1 > vivid=1 > vim2m=1 > vimc=1 > @@ -109,6 +112,9 @@ while [ ! -z "$1" ]; do > vimc=1 > vicodec=1 > ;; > + vidtv) > + vidtv=1 > + ;; > vivid) > vivid=1 > ;; > @@ -162,6 +168,72 @@ $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=21 > > echo > > +if [ $vidtv -eq 1 ]; then > + rmmod vidtv 2&>/dev/null > + modprobe vidtv > + sleep 2 > + dmesg -n notice > + echo > + > + if ! media-ctl -d platform:vidtv -p ; then > + echo "FAIL: the vidtv module failed to load" | tee -a $tmp > + echo "Grand Total for vidtv: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp > + echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" > + rmmod vidtv > + exit 0 > + fi > + > + echo > + echo > + echo > + echo > + echo > + echo > + echo > + echo > + echo > + echo unbind vidtv > + echo > + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/unbind > + sleep $unbind_time > + echo > + echo rebind vidtv > + echo > + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/bind > + sleep 1 > + echo > + echo second unbind vidtv > + echo > + sleep 1 > + echo > + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/unbind > + sleep $reunbind_time > + echo > + echo rmmod vidtv > + echo > + rmmod vidtv > + sleep $rmmod_time > + if [ $kmemleak -eq 1 ]; then > + echo > + echo kmemleak results for vidtv: > + echo > + echo scan >/sys/kernel/debug/kmemleak > + cat /sys/kernel/debug/kmemleak > + echo > + echo end of kmemleak results > + echo clear >/sys/kernel/debug/kmemleak > + fi > + echo > + echo > + echo > + echo > + echo > + echo > + echo > + echo > + > +fi > + > if [ $vivid -eq 1 ]; then > dmesg -n notice > echo >
diff --git a/contrib/test/test-media b/contrib/test/test-media index 1c1d2e37b..86a2e081a 100755 --- a/contrib/test/test-media +++ b/contrib/test/test-media @@ -4,6 +4,7 @@ # # Copyright 2019 Cisco Systems, Inc. and/or its affiliates. All rights reserved. +vidtv=0 vivid=0 vim2m=0 vimc=0 @@ -51,6 +52,7 @@ if [ -z "$1" ]; then echo "-32: use v4l2-ctl-32 and v4l2-compliance-32 to test the 32 bit compat layer" echo echo Test Targets: + echo "vidtv: test the vidtv driver" echo "vivid: test the vivid driver" echo "vim2m: test the vim2m driver" echo "vimc: test the vimc driver" @@ -96,6 +98,7 @@ while [ ! -z "$1" ]; do fi ;; all) + vidtv=1 vivid=1 vim2m=1 vimc=1 @@ -109,6 +112,9 @@ while [ ! -z "$1" ]; do vimc=1 vicodec=1 ;; + vidtv) + vidtv=1 + ;; vivid) vivid=1 ;; @@ -162,6 +168,72 @@ $v4l2_ctl -z platform:vivid-002 -d vivid-002-vid-out -o1 -x width=3840,height=21 echo +if [ $vidtv -eq 1 ]; then + rmmod vidtv 2&>/dev/null + modprobe vidtv + sleep 2 + dmesg -n notice + echo + + if ! media-ctl -d platform:vidtv -p ; then + echo "FAIL: the vidtv module failed to load" | tee -a $tmp + echo "Grand Total for vidtv: Succeeded: 0, Failed: 1, Warnings: 0" | tee -a $tmp + echo "Final Summary: 1, Succeeded: 0, Failed: 1, Warnings: 0" + rmmod vidtv + exit 0 + fi + + echo + echo + echo + echo + echo + echo + echo + echo + echo + echo unbind vidtv + echo + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/unbind + sleep $unbind_time + echo + echo rebind vidtv + echo + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/bind + sleep 1 + echo + echo second unbind vidtv + echo + sleep 1 + echo + echo -n vidtv.0 >/sys/bus/platform/drivers/vidtv/unbind + sleep $reunbind_time + echo + echo rmmod vidtv + echo + rmmod vidtv + sleep $rmmod_time + if [ $kmemleak -eq 1 ]; then + echo + echo kmemleak results for vidtv: + echo + echo scan >/sys/kernel/debug/kmemleak + cat /sys/kernel/debug/kmemleak + echo + echo end of kmemleak results + echo clear >/sys/kernel/debug/kmemleak + fi + echo + echo + echo + echo + echo + echo + echo + echo + +fi + if [ $vivid -eq 1 ]; then dmesg -n notice echo