@@ -32,74 +32,6 @@
* following api will request gpio lines, do the operation and then
* release these lines.
*/
-/**
- * gpiotools_request_linehandle() - request gpio lines in a gpiochip
- * @device_name: The name of gpiochip without prefix "/dev/",
- * such as "gpiochip0"
- * @lines: An array desired lines, specified by offset
- * index for the associated GPIO device.
- * @num_lines: The number of lines to request.
- * @flag: The new flag for requsted gpio. Reference
- * "linux/gpio.h" for the meaning of flag.
- * @data: Default value will be set to gpio when flag is
- * GPIOHANDLE_REQUEST_OUTPUT.
- * @consumer_label: The name of consumer, such as "sysfs",
- * "powerkey". This is useful for other users to
- * know who is using.
- *
- * Request gpio lines through the ioctl provided by chardev. User
- * could call gpiotools_set_values() and gpiotools_get_values() to
- * read and write respectively through the returned fd. Call
- * gpiotools_release_linehandle() to release these lines after that.
- *
- * Return: On success return the fd;
- * On failure return the errno.
- */
-int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
- unsigned int num_lines, unsigned int flag,
- struct gpiohandle_data *data,
- const char *consumer_label)
-{
- struct gpiohandle_request req;
- char *chrdev_name;
- int fd;
- int i;
- int ret;
-
- ret = asprintf(&chrdev_name, "/dev/%s", device_name);
- if (ret < 0)
- return -ENOMEM;
-
- fd = open(chrdev_name, 0);
- if (fd == -1) {
- ret = -errno;
- fprintf(stderr, "Failed to open %s, %s\n",
- chrdev_name, strerror(errno));
- goto exit_free_name;
- }
-
- for (i = 0; i < num_lines; i++)
- req.lineoffsets[i] = lines[i];
-
- req.flags = flag;
- strcpy(req.consumer_label, consumer_label);
- req.lines = num_lines;
- if (flag & GPIOHANDLE_REQUEST_OUTPUT)
- memcpy(req.default_values, data, sizeof(req.default_values));
-
- ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req);
- if (ret == -1) {
- ret = -errno;
- fprintf(stderr, "Failed to issue %s (%d), %s\n",
- "GPIO_GET_LINEHANDLE_IOCTL", ret, strerror(errno));
- }
-
- if (close(fd) == -1)
- perror("Failed to close GPIO character device file");
-exit_free_name:
- free(chrdev_name);
- return ret < 0 ? ret : req.fd;
-}
/**
* gpiotools_request_line() - request gpio lines in a gpiochip
@@ -215,27 +147,6 @@ int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values)
return ret;
}
-/**
- * gpiotools_release_linehandle(): Release the line(s) of gpiochip
- * @fd: The fd returned by
- * gpiotools_request_linehandle().
- *
- * Return: On success return 0;
- * On failure return the errno.
- */
-int gpiotools_release_linehandle(const int fd)
-{
- int ret;
-
- ret = close(fd);
- if (ret == -1) {
- perror("Failed to close GPIO LINEHANDLE device file");
- ret = -errno;
- }
-
- return ret;
-}
-
/**
* gpiotools_release_line(): Release the line(s) of gpiochip
* @fd: The fd returned by
@@ -24,12 +24,6 @@ static inline int check_prefix(const char *str, const char *prefix)
strncmp(str, prefix, strlen(prefix)) == 0;
}
-int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
- unsigned int num_lines, unsigned int flag,
- struct gpiohandle_data *data,
- const char *consumer_label);
-int gpiotools_release_linehandle(const int fd);
-
int gpiotools_request_line(const char *device_name,
unsigned int *lines,
unsigned int num_lines,
gpio-mockup-chardev helper has been obsoleted and removed, so also remove the tools/gpio code that it, and nothing else, was using. Signed-off-by: Kent Gibson <warthog618@gmail.com> --- tools/gpio/gpio-utils.c | 89 ----------------------------------------- tools/gpio/gpio-utils.h | 6 --- 2 files changed, 95 deletions(-)