@@ -9,7 +9,8 @@ obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
- board-mop500-u8500uib.o
+ board-mop500-u8500uib.o \
+ board-mop500-pins.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
b/arch/arm/mach-ux500/board-mop500-pins.c
new file mode 100644
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <plat/pincfg.h>
+
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+ /* SSP0 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD,
+ GPIO146_SSP0_TXD,
+
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+
+ /* SKE keypad */
+ GPIO153_KP_I7,
+ GPIO154_KP_I6,
+ GPIO155_KP_I5,
+ GPIO156_KP_I4,
+ GPIO157_KP_O7,
+ GPIO158_KP_O6,
+ GPIO159_KP_O5,
+ GPIO160_KP_O4,
+ GPIO161_KP_I3,
+ GPIO162_KP_I2,
+ GPIO163_KP_I1,
+ GPIO164_KP_I0,
+ GPIO165_KP_O3,
+ GPIO166_KP_O2,
+ GPIO167_KP_O1,
+ GPIO168_KP_O0,
+
+ /* GPIO_EXP_INT */
+ GPIO217_GPIO,
+
+ /* STMPE1601 IRQ */
+ GPIO218_GPIO | PIN_INPUT_PULLUP,
+
+ /* touch screen */
+ GPIO84_GPIO | PIN_INPUT_PULLUP,
+
+ /* USB OTG */
+ GPIO256_USB_NXT | PIN_PULL_DOWN,
+ GPIO257_USB_STP | PIN_PULL_UP,
+ GPIO258_USB_XCLK | PIN_PULL_DOWN,
+ GPIO259_USB_DIR | PIN_PULL_DOWN,
+ GPIO260_USB_DAT7 | PIN_PULL_DOWN,
+ GPIO261_USB_DAT6 | PIN_PULL_DOWN,
+ GPIO262_USB_DAT5 | PIN_PULL_DOWN,
+ GPIO263_USB_DAT4 | PIN_PULL_DOWN,
+ GPIO264_USB_DAT3 | PIN_PULL_DOWN,
+ GPIO265_USB_DAT2 | PIN_PULL_DOWN,
+ GPIO266_USB_DAT1 | PIN_PULL_DOWN,
+ GPIO267_USB_DAT0 | PIN_PULL_DOWN,
+};
+
+void __init mop500_pins_init(void)
+{
+ nmk_config_pins(mop500_pins,
+ ARRAY_SIZE(mop500_pins));
+}
b/arch/arm/mach-ux500/board-mop500.c
@@ -28,7 +28,6 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <plat/pincfg.h>
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
@@ -39,69 +38,9 @@
#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
-#include "pins-db8500.h"
#include "board-mop500.h"
#include "board-mop500-regulators.h"
-static pin_cfg_t mop500_pins[] = {
- /* SSP0 */
- GPIO143_SSP0_CLK,
- GPIO144_SSP0_FRM,
- GPIO145_SSP0_RXD,
- GPIO146_SSP0_TXD,
-
- /* I2C */
- GPIO147_I2C0_SCL,
- GPIO148_I2C0_SDA,
- GPIO16_I2C1_SCL,
- GPIO17_I2C1_SDA,
- GPIO10_I2C2_SDA,
- GPIO11_I2C2_SCL,
- GPIO229_I2C3_SDA,
- GPIO230_I2C3_SCL,
-
- /* SKE keypad */
- GPIO153_KP_I7,
- GPIO154_KP_I6,
- GPIO155_KP_I5,
- GPIO156_KP_I4,
- GPIO157_KP_O7,
- GPIO158_KP_O6,
- GPIO159_KP_O5,
- GPIO160_KP_O4,
- GPIO161_KP_I3,
- GPIO162_KP_I2,
- GPIO163_KP_I1,
- GPIO164_KP_I0,
- GPIO165_KP_O3,
- GPIO166_KP_O2,
- GPIO167_KP_O1,
- GPIO168_KP_O0,
-
- /* GPIO_EXP_INT */
- GPIO217_GPIO,
-
- /* STMPE1601 IRQ */
- GPIO218_GPIO | PIN_INPUT_PULLUP,
-
- /* touch screen */
- GPIO84_GPIO | PIN_INPUT_PULLUP,
-
- /* USB OTG */
- GPIO256_USB_NXT | PIN_PULL_DOWN,
- GPIO257_USB_STP | PIN_PULL_UP,
- GPIO258_USB_XCLK | PIN_PULL_DOWN,
- GPIO259_USB_DIR | PIN_PULL_DOWN,
- GPIO260_USB_DAT7 | PIN_PULL_DOWN,
- GPIO261_USB_DAT6 | PIN_PULL_DOWN,
- GPIO262_USB_DAT5 | PIN_PULL_DOWN,
- GPIO263_USB_DAT4 | PIN_PULL_DOWN,
- GPIO264_USB_DAT3 | PIN_PULL_DOWN,
- GPIO265_USB_DAT2 | PIN_PULL_DOWN,
- GPIO266_USB_DAT1 | PIN_PULL_DOWN,
- GPIO267_USB_DAT0 | PIN_PULL_DOWN,
-};
-
static struct ab8500_platform_data ab8500_platdata = {
.irq_base = MOP500_AB8500_IRQ_BASE,
.regulator = ab8500_regulators,
@@ -444,7 +383,7 @@ static void __init u8500_init_machine(void)
{
u8500_init_devices();
- nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+ mop500_pins_init();
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/board-mop500.h
b/arch/arm/mach-ux500/board-mop500.h
@@ -22,6 +22,7 @@ extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
+void __init mop500_pins_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
--
1.7.3.2