Message ID | 20201224170502.2254683-9-aford173@gmail.com |
---|---|
State | New |
Headers | show |
Series | None | expand |
Hi Adam, On Thu, Dec 24, 2020 at 6:05 PM Adam Ford <aford173@gmail.com> wrote: > The eMMC can run at hs400 and the WiFi chip can run at sdr104. > Set the respective flags to push the sdhi faster. > > Signed-off-by: Adam Ford <aford173@gmail.com> Thanks for your patch! > --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi > +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi > @@ -271,8 +271,9 @@ &scif2 { > }; > > &sdhi2 { > - pinctrl-names = "default"; > pinctrl-0 = <&sdhi2_pins>; > + pinctrl-1 = <&sdhi2_pins>; > + pinctrl-names = "default", "state_uhs"; > bus-width = <4>; > vmmc-supply = <®_3p3v>; > vqmmc-supply = <®_1p8v>; > @@ -281,6 +282,8 @@ &sdhi2 { > pm-ignore-notify; > keep-power-in-suspend; > mmc-pwrseq = <&wlan_pwrseq>; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > status = "okay"; > #address-cells = <1>; > #size-cells = <0>; The HS400 change was accidentally part of "[PATCH V2 5/9] arm64: dts: renesas: beacon: Cleanup USB References": | @@ -315,16 +306,12 @@ &sdhi3 { | vmmc-supply = <®_3p3v>; | vqmmc-supply = <®_1p8v>; | bus-width = <8>; | - mmc-hs200-1_8v; | + mmc-hs400-1_8v; | non-removable; | fixed-emmc-driver-type = <1>; | status = "okay"; You probably want to keep, not replace, the "mmc-hs200-1_8v" property, though. With that fixed: Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi index b34ffa1e77fa..56bdd80e36d0 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -271,8 +271,9 @@ &scif2 { }; &sdhi2 { - pinctrl-names = "default"; pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins>; + pinctrl-names = "default", "state_uhs"; bus-width = <4>; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; @@ -281,6 +282,8 @@ &sdhi2 { pm-ignore-notify; keep-power-in-suspend; mmc-pwrseq = <&wlan_pwrseq>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; #address-cells = <1>; #size-cells = <0>;
The eMMC can run at hs400 and the WiFi chip can run at sdr104. Set the respective flags to push the sdhi faster. Signed-off-by: Adam Ford <aford173@gmail.com> --- V2: New to series