diff mbox series

AT91 - SAMA5D27 adding a new board - common initialisation code and file names

Message ID 7c87ca0e-dd90-07f8-cff5-badcde5e2073@seoss.co.uk
State New
Headers show
Series AT91 - SAMA5D27 adding a new board - common initialisation code and file names | expand

Commit Message

Tim Small Dec. 17, 2020, 3:09 p.m. UTC 
Hi,

I'm in the process of adding support to U-Boot for an AT91 SAMA5D27
based board. There may be a USB port configuration change pending, but
otherwise it's functionally complete.

The design is quite similar to the Microchip SAMA5D2 Xplained Board, to
the extent that I have only 6 lines of code changes out of the ~180
lines of (non-comment) code in 
board/atmel/sama5d2_xplained/sama5d2_xplained.c

In particular the clocks and memory setup code is non-trivial, but
identical. With this in mind I was wondering whether (and to what
extent) an acceptable patch to support this board would require
factoring out this common code?

The (non-comment) diff between my interim init code for the new board,
and eval/reference board is currently:
 






I'm also uncertain about file naming - there seem to be a number of
different conventions in use for file and directory names (different
combinations of SoC, board, architecture, and manufacturer).


The new board is:

mfr: South Coast Science
model: Cube MB v1


Do the following file and directory names look reasonable?



 arch/arm/dts/Makefile                  |   3 +++
 arch/arm/dts/at91-sama5d27_cubemb1.dts | 263 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig             |   8 +++++++
 board/scs/cubemb1/Kconfig              |  15 +++++++++++++
 board/scs/cubemb1/MAINTAINERS          |   6 ++++++
 board/scs/cubemb1/Makefile             |   8 +++++++
 board/scs/cubemb1/cubemb1.c            | 198 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/cubemb1_emmc_defconfig         | 104 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 configs/cubemb1_sdcard_defconfig       | 104 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/configs/cubemb1.h              |   9 ++++++++
 10 files changed, 718 insertions(+)


Cheers,

Tim.

-- 
South East Open Source Solutions Limited
Registered in England and Wales with company number 06134732.  Registered Office: 2 Powell Gardens, Redhill, Surrey, RH1 1TQ
VAT number: GB 900 6633 53  http://seoss.co.uk/ +44-(0)1273-808309
diff mbox series

Patch

--- board/atmel/sama5d2_xplained/sama5d2_xplained.c     2020-12-15 10:52:32.175616057 +0000
+++ board/scs/cubemb1/cubemb1.c 2020-12-17 14:42:42.399610818 +0000
@@ -30,10 +30,6 @@ 
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
-#ifdef CONFIG_DM_VIDEO
-       at91_video_show_board_info();
-#endif
-       at91_pda_detect();
        return 0;
 }
 #endif
@@ -83,13 +79,13 @@ 
        return 0;
 }

-#define AT24MAC_MAC_OFFSET     0x9a
+#define MAC24AA_MAC_OFFSET     0xfa

 #ifdef CONFIG_MISC_INIT_R
 int misc_init_r(void)
 {
 #ifdef CONFIG_I2C_EEPROM
-       at91_set_ethaddr(AT24MAC_MAC_OFFSET);
+       at91_set_ethaddr(MAC24AA_MAC_OFFSET);
 #endif

        return 0;