| Message ID | 20201217072642.1319-1-m.szyprowski@samsung.com |
|---|---|
| State | Accepted |
| Commit | d10037e976ddcf4fda9d25bce4e00429d05f0c8b |
| Headers | show |
| Series | board: amlogic: vim3: read ethernet MAC address from efuse | expand |
On 17/12/2020 08:26, Marek Szyprowski wrote: > Add the board specific code for reading built-in ethernet MAC address > from efuse. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > board/amlogic/vim3/vim3.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c > index 09ef39ff30..a36df61583 100644 > --- a/board/amlogic/vim3/vim3.c > +++ b/board/amlogic/vim3/vim3.c > @@ -11,6 +11,7 @@ > #include <net.h> > #include <asm/io.h> > #include <asm/arch/eth.h> > +#include <asm/arch/sm.h> > #include <i2c.h> > #include "khadas-mcu.h" > > @@ -129,9 +130,27 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) > return 0; > } > > +#define EFUSE_MAC_OFFSET 0 > +#define EFUSE_MAC_SIZE 6 > + > int misc_init_r(void) > { > + uint8_t mac_addr[EFUSE_MAC_SIZE]; > + ssize_t len; > + > meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); > > + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { > + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, > + mac_addr, EFUSE_MAC_SIZE); > + if (len != EFUSE_MAC_SIZE) > + return 0; > + > + if (is_valid_ethaddr(mac_addr)) > + eth_env_set_enetaddr("ethaddr", mac_addr); > + else > + meson_generate_serial_ethaddr(); > + } > + > return 0; > } > Thx, I wasn't aware Khadas flashed the MAC address in the fuse I'll do a quick test on my boards. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Neil
On 12/17/20 5:43 PM, Neil Armstrong wrote: > On 17/12/2020 08:26, Marek Szyprowski wrote: >> Add the board specific code for reading built-in ethernet MAC address >> from efuse. >> >> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >> --- >> board/amlogic/vim3/vim3.c | 19 +++++++++++++++++++ >> 1 file changed, 19 insertions(+) >> >> diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c >> index 09ef39ff30..a36df61583 100644 >> --- a/board/amlogic/vim3/vim3.c >> +++ b/board/amlogic/vim3/vim3.c >> @@ -11,6 +11,7 @@ >> #include <net.h> >> #include <asm/io.h> >> #include <asm/arch/eth.h> >> +#include <asm/arch/sm.h> >> #include <i2c.h> >> #include "khadas-mcu.h" >> >> @@ -129,9 +130,27 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) >> return 0; >> } >> >> +#define EFUSE_MAC_OFFSET 0 >> +#define EFUSE_MAC_SIZE 6 >> + >> int misc_init_r(void) >> { >> + uint8_t mac_addr[EFUSE_MAC_SIZE]; >> + ssize_t len; >> + >> meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); >> >> + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { >> + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, >> + mac_addr, EFUSE_MAC_SIZE); >> + if (len != EFUSE_MAC_SIZE) >> + return 0; >> + >> + if (is_valid_ethaddr(mac_addr)) >> + eth_env_set_enetaddr("ethaddr", mac_addr); >> + else >> + meson_generate_serial_ethaddr(); >> + } >> + >> return 0; >> } >> > > Thx, I wasn't aware Khadas flashed the MAC address in the fuse > > I'll do a quick test on my boards. > > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Best Regards, Jaehoon Chung > > Neil >
diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c index 09ef39ff30..a36df61583 100644 --- a/board/amlogic/vim3/vim3.c +++ b/board/amlogic/vim3/vim3.c @@ -11,6 +11,7 @@ #include <net.h> #include <asm/io.h> #include <asm/arch/eth.h> +#include <asm/arch/sm.h> #include <i2c.h> #include "khadas-mcu.h" @@ -129,9 +130,27 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd) return 0; } +#define EFUSE_MAC_OFFSET 0 +#define EFUSE_MAC_SIZE 6 + int misc_init_r(void) { + uint8_t mac_addr[EFUSE_MAC_SIZE]; + ssize_t len; + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { + len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, + mac_addr, EFUSE_MAC_SIZE); + if (len != EFUSE_MAC_SIZE) + return 0; + + if (is_valid_ethaddr(mac_addr)) + eth_env_set_enetaddr("ethaddr", mac_addr); + else + meson_generate_serial_ethaddr(); + } + return 0; }
Add the board specific code for reading built-in ethernet MAC address from efuse. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- board/amlogic/vim3/vim3.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) -- 2.17.1