diff mbox series

arm64: dts: qcom: sc7180: Enable passive polling for cpu thermal zones

Message ID 1608025150-10779-1-git-send-email-manafm@codeaurora.org
State New
Headers show
Series arm64: dts: qcom: sc7180: Enable passive polling for cpu thermal zones | expand

Commit Message

Manaf Meethalavalappu Pallikunhi Dec. 15, 2020, 9:39 a.m. UTC 
Enable passive polling delay for cpu thermal zone for sc7180. It
enables periodic thermal zone re-evaluation on post first trip
temperature violation.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Doug Anderson Dec. 15, 2020, 3:42 p.m. UTC | #1 
Hi,

On Tue, Dec 15, 2020 at 1:39 AM Manaf Meethalavalappu Pallikunhi
<manafm@codeaurora.org> wrote:
>
> Enable passive polling delay for cpu thermal zone for sc7180. It
> enables periodic thermal zone re-evaluation on post first trip
> temperature violation.
>
> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 98050b3..79d0747 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -4355,7 +4355,7 @@
>
>         thermal-zones {
>                 cpu0-thermal {
> -                       polling-delay-passive = <0>;
> +                       polling-delay-passive = <50>;

Matthias already landed a similar patch, see:

https://lore.kernel.org/r/20201111120334.1.Ifc04ea235c3c370e3b21ec3b4d5dead83cc403b4@changeid

I guess the question is whether 50 is better or 250 is better.  Is
this just a finger in the wind estimate or do you have data showing
that 50 is better than 250?

-Doug
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 98050b3..79d0747 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -4355,7 +4355,7 @@ 
 
 	thermal-zones {
 		cpu0-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 1>;
@@ -4403,7 +4403,7 @@ 
 		};
 
 		cpu1-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 2>;
@@ -4451,7 +4451,7 @@ 
 		};
 
 		cpu2-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 3>;
@@ -4499,7 +4499,7 @@ 
 		};
 
 		cpu3-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 4>;
@@ -4547,7 +4547,7 @@ 
 		};
 
 		cpu4-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 5>;
@@ -4595,7 +4595,7 @@ 
 		};
 
 		cpu5-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 6>;
@@ -4643,7 +4643,7 @@ 
 		};
 
 		cpu6-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 9>;
@@ -4683,7 +4683,7 @@ 
 		};
 
 		cpu7-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 10>;
@@ -4723,7 +4723,7 @@ 
 		};
 
 		cpu8-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 11>;
@@ -4763,7 +4763,7 @@ 
 		};
 
 		cpu9-thermal {
-			polling-delay-passive = <0>;
+			polling-delay-passive = <50>;
 			polling-delay = <0>;
 
 			thermal-sensors = <&tsens0 12>;