@@ -24,137 +24,10 @@ another partitioning method.
Available bindings are listed in the "partitions" subdirectory.
-Fixed Partitions
-================
-
-Partitions can be represented by sub-nodes of a flash device. This can be used
-on platforms which have strong conventions about which portions of a flash are
-used for what purposes, but which don't use an on-flash partition table such
-as RedBoot.
-
-The partition table should be a subnode of the flash node and should be named
-'partitions'. This node should have the following property:
-- compatible : (required) must be "fixed-partitions"
-Partitions are then defined in subnodes of the partitions node.
+Deprecated: partitions defined in flash node
+============================================
For backwards compatibility partitions as direct subnodes of the flash device are
supported. This use is discouraged.
NOTE: also for backwards compatibility, direct subnodes that have a compatible
string are not considered partitions, as they may be used for other bindings.
-
-#address-cells & #size-cells must both be present in the partitions subnode of the
-flash device. There are two valid values for both:
-<1>: for partitions that require a single 32-bit cell to represent their
- size/address (aka the value is below 4 GiB)
-<2>: for partitions that require two 32-bit cells to represent their
- size/address (aka the value is 4 GiB or greater).
-
-Required properties:
-- reg : The partition's offset and size within the flash
-
-Optional properties:
-- label : The label / name for this partition. If omitted, the label is taken
- from the node name (excluding the unit address).
-- read-only : This parameter, if present, is a hint to Linux that this
- partition should only be mounted read-only. This is usually used for flash
- partitions containing early-boot firmware images or data which should not be
- clobbered.
-- lock : Do not unlock the partition at initialization time (not supported on
- all devices)
-- slc-mode: This parameter, if present, allows one to emulate SLC mode on a
- partition attached to an MLC NAND thus making this partition immune to
- paired-pages corruptions
-
-Examples:
-
-
-flash@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x100000>;
- read-only;
- };
-
- uimage@100000 {
- reg = <0x0100000 0x200000>;
- };
- };
-};
-
-flash@1 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <2>;
-
- /* a 4 GiB partition */
- partition@0 {
- label = "filesystem";
- reg = <0x00000000 0x1 0x00000000>;
- };
- };
-};
-
-flash@2 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <2>;
- #size-cells = <2>;
-
- /* an 8 GiB partition */
- partition@0 {
- label = "filesystem #1";
- reg = <0x0 0x00000000 0x2 0x00000000>;
- };
-
- /* a 4 GiB partition */
- partition@200000000 {
- label = "filesystem #2";
- reg = <0x2 0x00000000 0x1 0x00000000>;
- };
- };
-};
-
-flash@3 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0x000000 0x100000>;
- read-only;
- };
-
- firmware@100000 {
- label = "firmware";
- reg = <0x100000 0xe00000>;
- compatible = "brcm,trx";
- };
-
- calibration@f00000 {
- label = "calibration";
- reg = <0xf00000 0x100000>;
- compatible = "fixed-partitions";
- ranges = <0 0xf00000 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "wifi0";
- reg = <0x000000 0x080000>;
- };
-
- partition@80000 {
- label = "wifi1";
- reg = <0x080000 0x080000>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed partitions
+
+description: |
+ This binding can be used on platforms which have strong conventions about
+ which portions of a flash are used for what purposes, but which don't use an
+ on-flash partition table such as RedBoot.
+
+ The partition table should be a node named "partitions". Partitions are then
+ defined as subnodes.
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ compatible:
+ const: fixed-partitions
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+patternProperties:
+ "@[0-9a-f]+$":
+ description: node describing a single flash partition
+ type: object
+
+ properties:
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+ label:
+ description: The label / name for this partition. If omitted, the label
+ is taken from the node name (excluding the unit address).
+
+ read-only:
+ description: This parameter, if present, is a hint that this partition
+ should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should
+ not be clobbered.
+ type: boolean
+
+ lock:
+ description: Do not unlock the partition at initialization time (not
+ supported on all devices)
+ type: boolean
+
+ slc-mode:
+ description: This parameter, if present, allows one to emulate SLC mode
+ on a partition attached to an MLC NAND thus making this partition
+ immune to paired-pages corruptions
+ type: boolean
+
+ required:
+ - reg
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
+
+examples:
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ uimage@100000 {
+ reg = <0x0100000 0x200000>;
+ };
+ };
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <2>;
+
+ /* a 4 GiB partition */
+ partition@0 {
+ label = "filesystem";
+ reg = <0x00000000 0x1 0x00000000>;
+ };
+ };
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* an 8 GiB partition */
+ partition@0 {
+ label = "filesystem #1";
+ reg = <0x0 0x00000000 0x2 0x00000000>;
+ };
+
+ /* a 4 GiB partition */
+ partition@200000000 {
+ label = "filesystem #2";
+ reg = <0x2 0x00000000 0x1 0x00000000>;
+ };
+ };
+ - |
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x100000>;
+ read-only;
+ };
+
+ firmware@100000 {
+ compatible = "brcm,trx";
+ label = "firmware";
+ reg = <0x100000 0xe00000>;
+ };
+
+ calibration@f00000 {
+ compatible = "fixed-partitions";
+ label = "calibration";
+ reg = <0xf00000 0x100000>;
+ ranges = <0 0xf00000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "wifi0";
+ reg = <0x000000 0x080000>;
+ };
+
+ partition@80000 {
+ label = "wifi1";
+ reg = <0x080000 0x080000>;
+ };
+ };
+ };