diff mbox series

[2/6] ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID

Message ID 1607609124-17250-3-git-send-email-kvalo@codeaurora.org
State New
Headers show
Series ath11k: QCA6390 stability fixes | expand

Commit Message

Kalle Valo Dec. 10, 2020, 2:05 p.m. UTC 
From: Carl Huang <cjhuang@codeaurora.org>

It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware
to dbs mode instead of wmi_init command. This fixes a few strange stability
issues.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/core.c | 12 ++++++++---
 drivers/net/wireless/ath/ath11k/hw.h   |  6 ------
 drivers/net/wireless/ath/ath11k/wmi.c  | 38 ++++++++++++++++++++++++++++++----
 drivers/net/wireless/ath/ath11k/wmi.h  |  3 +++
 4 files changed, 46 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index da20ed752ca5..3c28e7ad7d51 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -51,7 +51,6 @@  static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq8074,
 		.svc_to_ce_map_len = 21,
 		.single_pdev_only = false,
-		.needs_band_to_mac = true,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = 1,
 		.rx_mac_buf_ring = false,
@@ -89,7 +88,6 @@  static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq6018,
 		.svc_to_ce_map_len = 19,
 		.single_pdev_only = false,
-		.needs_band_to_mac = true,
 		.rxdma1_enable = true,
 		.num_rxmda_per_pdev = 1,
 		.rx_mac_buf_ring = false,
@@ -127,7 +125,6 @@  static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_qca6390,
 		.svc_to_ce_map_len = 14,
 		.single_pdev_only = true,
-		.needs_band_to_mac = false,
 		.rxdma1_enable = false,
 		.num_rxmda_per_pdev = 2,
 		.rx_mac_buf_ring = true,
@@ -646,6 +643,15 @@  static int ath11k_core_start(struct ath11k_base *ab,
 		goto err_reo_cleanup;
 	}
 
+	/* put hardware to DBS mode */
+	if (ab->hw_params.single_pdev_only) {
+		ret = ath11k_wmi_set_hw_mode(ab, WMI_HOST_HW_MODE_DBS);
+		if (ret) {
+			ath11k_err(ab, "failed to send dbs mode: %d\n", ret);
+			goto err_hif_stop;
+		}
+	}
+
 	ret = ath11k_dp_tx_htt_h2t_ver_req_msg(ab);
 	if (ret) {
 		ath11k_err(ab, "failed to send htt version request message: %d\n",
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 17c4560b1c73..f33a458a465f 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -143,12 +143,6 @@  struct ath11k_hw_params {
 
 	bool single_pdev_only;
 
-	/* For example on QCA6390 struct
-	 * wmi_init_cmd_param::band_to_mac_config needs to be false as the
-	 * firmware creates the mapping.
-	 */
-	bool needs_band_to_mac;
-
 	bool rxdma1_enable;
 	int num_rxmda_per_pdev;
 	bool rx_mac_buf_ring;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 59e179d86f38..79b7f991c612 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -3479,6 +3479,35 @@  int ath11k_wmi_wait_for_unified_ready(struct ath11k_base *ab)
 	return 0;
 }
 
+int ath11k_wmi_set_hw_mode(struct ath11k_base *ab,
+			   enum wmi_host_hw_mode_config_type mode)
+{
+	struct wmi_pdev_set_hw_mode_cmd_param *cmd;
+	struct sk_buff *skb;
+	struct ath11k_wmi_base *wmi_ab = &ab->wmi_ab;
+	int len;
+	int ret;
+
+	len = sizeof(*cmd);
+
+	skb = ath11k_wmi_alloc_skb(wmi_ab, len);
+	cmd = (struct wmi_pdev_set_hw_mode_cmd_param *)skb->data;
+
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_PDEV_SET_HW_MODE_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+
+	cmd->pdev_id = WMI_PDEV_ID_SOC;
+	cmd->hw_mode_index = mode;
+
+	ret = ath11k_wmi_cmd_send(&wmi_ab->wmi[0], skb, WMI_PDEV_SET_HW_MODE_CMDID);
+	if (ret) {
+		ath11k_warn(ab, "failed to send WMI_PDEV_SET_HW_MODE_CMDID\n");
+		dev_kfree_skb(skb);
+	}
+
+	return ret;
+}
+
 int ath11k_wmi_cmd_init(struct ath11k_base *ab)
 {
 	struct ath11k_wmi_base *wmi_sc = &ab->wmi_ab;
@@ -3497,10 +3526,11 @@  int ath11k_wmi_cmd_init(struct ath11k_base *ab)
 	init_param.hw_mode_id = wmi_sc->preferred_hw_mode;
 	init_param.mem_chunks = wmi_sc->mem_chunks;
 
-	if (ab->hw_params.needs_band_to_mac) {
-		init_param.num_band_to_mac = ab->num_radios;
-		ath11k_fill_band_to_mac_param(ab, init_param.band_to_mac);
-	}
+	if (ab->hw_params.single_pdev_only)
+		init_param.hw_mode_id = WMI_HOST_HW_MODE_MAX;
+
+	init_param.num_band_to_mac = ab->num_radios;
+	ath11k_fill_band_to_mac_param(ab, init_param.band_to_mac);
 
 	return ath11k_init_cmd_send(&wmi_sc->wmi[0], &init_param);
 }
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 05d5f6d30072..62840717a946 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -5171,4 +5171,7 @@  int ath11k_wmi_fils_discovery(struct ath11k *ar, u32 vdev_id, u32 interval,
 			      bool unsol_bcast_probe_resp_enabled);
 int ath11k_wmi_probe_resp_tmpl(struct ath11k *ar, u32 vdev_id,
 			       struct sk_buff *tmpl);
+int ath11k_wmi_set_hw_mode(struct ath11k_base *ab,
+			   enum wmi_host_hw_mode_config_type mode);
+
 #endif