diff mbox series

[3/8] Documentation: HID: hiddev editing & corrections

Message ID 20201204062022.5095-4-rdunlap@infradead.org
State Superseded
Headers show
Series Documentation: HID: edit/correct all files | expand

Commit Message

Randy Dunlap Dec. 4, 2020, 6:20 a.m. UTC
Do basic editing & correction to hiddev.rst:
- use HID instead of hid consistently
- add hyphenation of multi-word adjectives
- drop a duplicate word
- unhyphenate "a priori"


Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/hid/hiddev.rst |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Jonathan Cameron Dec. 5, 2020, 5:17 p.m. UTC | #1
On Thu,  3 Dec 2020 22:20:17 -0800
Randy Dunlap <rdunlap@infradead.org> wrote:

> Do basic editing & correction to hiddev.rst:

> - use HID instead of hid consistently


One case inline, where I think the usage of hid-core
might have been deliberate.

> - add hyphenation of multi-word adjectives

> - drop a duplicate word

> - unhyphenate "a priori"

> 

> 

> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>

> Cc: Jiri Kosina <jikos@kernel.org>

> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>

> Cc: linux-input@vger.kernel.org

> Cc: Jonathan Corbet <corbet@lwn.net>

> Cc: linux-doc@vger.kernel.org

> ---

>  Documentation/hid/hiddev.rst |   12 ++++++------

>  1 file changed, 6 insertions(+), 6 deletions(-)

> 

> --- linux-next-20201201.orig/Documentation/hid/hiddev.rst

> +++ linux-next-20201201/Documentation/hid/hiddev.rst

> @@ -27,7 +27,7 @@ the following::

>                            --> hiddev.c ----> POWER / MONITOR CONTROL  

>  

>  In addition, other subsystems (apart from USB) can potentially feed

> -events into the input subsystem, but these have no effect on the hid

> +events into the input subsystem, but these have no effect on the HID

>  device interface.

>  

>  Using the HID Device Interface

> @@ -72,8 +72,8 @@ The hiddev API uses a read() interface,

>  

>  HID devices exchange data with the host computer using data

>  bundles called "reports".  Each report is divided into "fields",

> -each of which can have one or more "usages".  In the hid-core,

> -each one of these usages has a single signed 32 bit value.

> +each of which can have one or more "usages".  In the HID core,


Hmm. hid-core is (I think) kind of referring to the code in hid-core.c
Whereas a Human Interface Device core (HID core) sounds like
something different.  Not my doc though!

> +each one of these usages has a single signed 32-bit value.

>  

>  read():

>  -------

> @@ -113,7 +113,7 @@ HIDIOCAPPLICATION

>    - (none)

>  

>  This ioctl call returns the HID application usage associated with the

> -hid device. The third argument to ioctl() specifies which application

> +HID device. The third argument to ioctl() specifies which application

>  index to get. This is useful when the device has more than one

>  application collection. If the index is invalid (greater or equal to

>  the number of application collections this device has) the ioctl

> @@ -181,7 +181,7 @@ looked up by type (input, output or feat

>  must be filled in by the user. The ID can be absolute -- the actual

>  report id as reported by the device -- or relative --

>  HID_REPORT_ID_FIRST for the first report, and (HID_REPORT_ID_NEXT |

> -report_id) for the next report after report_id. Without a-priori

> +report_id) for the next report after report_id. Without a priori

>  information about report ids, the right way to use this ioctl is to

>  use the relative IDs above to enumerate the valid IDs. The ioctl

>  returns non-zero when there is no more next ID. The real report ID is

> @@ -200,7 +200,7 @@ HIDIOCGUCODE

>    - struct hiddev_usage_ref (read/write)

>  

>  Returns the usage_code in a hiddev_usage_ref structure, given that

> -given its report type, report id, field index, and index within the

> +its report type, report id, field index, and index within the

>  field have already been filled into the structure.

>  

>  HIDIOCGUSAGE
diff mbox series

Patch

--- linux-next-20201201.orig/Documentation/hid/hiddev.rst
+++ linux-next-20201201/Documentation/hid/hiddev.rst
@@ -27,7 +27,7 @@  the following::
                           --> hiddev.c ----> POWER / MONITOR CONTROL
 
 In addition, other subsystems (apart from USB) can potentially feed
-events into the input subsystem, but these have no effect on the hid
+events into the input subsystem, but these have no effect on the HID
 device interface.
 
 Using the HID Device Interface
@@ -72,8 +72,8 @@  The hiddev API uses a read() interface,
 
 HID devices exchange data with the host computer using data
 bundles called "reports".  Each report is divided into "fields",
-each of which can have one or more "usages".  In the hid-core,
-each one of these usages has a single signed 32 bit value.
+each of which can have one or more "usages".  In the HID core,
+each one of these usages has a single signed 32-bit value.
 
 read():
 -------
@@ -113,7 +113,7 @@  HIDIOCAPPLICATION
   - (none)
 
 This ioctl call returns the HID application usage associated with the
-hid device. The third argument to ioctl() specifies which application
+HID device. The third argument to ioctl() specifies which application
 index to get. This is useful when the device has more than one
 application collection. If the index is invalid (greater or equal to
 the number of application collections this device has) the ioctl
@@ -181,7 +181,7 @@  looked up by type (input, output or feat
 must be filled in by the user. The ID can be absolute -- the actual
 report id as reported by the device -- or relative --
 HID_REPORT_ID_FIRST for the first report, and (HID_REPORT_ID_NEXT |
-report_id) for the next report after report_id. Without a-priori
+report_id) for the next report after report_id. Without a priori
 information about report ids, the right way to use this ioctl is to
 use the relative IDs above to enumerate the valid IDs. The ioctl
 returns non-zero when there is no more next ID. The real report ID is
@@ -200,7 +200,7 @@  HIDIOCGUCODE
   - struct hiddev_usage_ref (read/write)
 
 Returns the usage_code in a hiddev_usage_ref structure, given that
-given its report type, report id, field index, and index within the
+its report type, report id, field index, and index within the
 field have already been filled into the structure.
 
 HIDIOCGUSAGE