diff mbox

[RFC/PATCH,5/5] ARM: dts: am437x-sk-evm: add vpfe support and ov2659 sensor

Message ID 1405447012-5340-6-git-send-email-balbi@ti.com
State New
Headers show

Commit Message

Felipe Balbi July 15, 2014, 5:56 p.m. UTC 
From: Darren Etheridge <detheridge@ti.com>

Adding necessary dts nodes to enable vpfe and ov2659 sensor on the correct i2c
bus and correct vpfe instance.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/am437x-sk-evm.dts | 63 +++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

Comments

Felipe Balbi July 15, 2014, 6:02 p.m. UTC | #1 
Hi,

On Tue, Jul 15, 2014 at 12:56:52PM -0500, Felipe Balbi wrote:
> From: Darren Etheridge <detheridge@ti.com>
> 
> Adding necessary dts nodes to enable vpfe and ov2659 sensor on the correct i2c

clearly this doesn't add ov2659 sensor support because we can't release
the driver for it. I'll fix the patch subject and commit log locally.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..ca6b4fe 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -184,6 +184,46 @@ 
 		>;
 	};
 
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -611,3 +655,22 @@ 
 &wdt {
 	status = "okay";
 };
+
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			if_type = <2>;
+			bus_width = <8>;
+			hdpol = <0>;
+			vdpol = <0>;
+		};
+	};
+};