diff mbox series

[v2,7/7] arm64: defconfig: Enable interconnect for imx8mq

Message ID 20201201123932.12312-8-martin.kepplinger@puri.sm
State New
Headers show
Series imx8mq: updates for the interconnect fabric | expand

Commit Message

Martin Kepplinger Dec. 1, 2020, 12:39 p.m. UTC
Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available for testing.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
 arch/arm64/configs/defconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Georgi Djakov Dec. 1, 2020, 1:10 p.m. UTC | #1
On 1.12.20 14:39, Martin Kepplinger wrote:
> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
> available for testing.

I hope that it's not just for testing, but using it.

> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>   arch/arm64/configs/defconfig | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 1fed16950a7c..830c26a95b3d 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y
>   CONFIG_MUX_MMIO=y
>   CONFIG_SLIM_QCOM_CTRL=m
>   CONFIG_SLIM_QCOM_NGD_CTRL=m
> -CONFIG_INTERCONNECT=y

Why are you removing this line?

Thanks,
Georgi

> +CONFIG_INTERCONNECT_IMX=m
> +CONFIG_INTERCONNECT_IMX8MQ=m
>   CONFIG_INTERCONNECT_QCOM=y
>   CONFIG_INTERCONNECT_QCOM_MSM8916=m
>   CONFIG_INTERCONNECT_QCOM_SDM845=m
>
Krzysztof Kozlowski Dec. 2, 2020, 8:02 a.m. UTC | #2
On Tue, Dec 01, 2020 at 01:39:32PM +0100, Martin Kepplinger wrote:
> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
> available for testing.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
>  arch/arm64/configs/defconfig | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
Krzysztof Kozlowski Dec. 2, 2020, 8:03 a.m. UTC | #3
On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote:
> On 01.12.20 14:10, Georgi Djakov wrote:

> > On 1.12.20 14:39, Martin Kepplinger wrote:

> > > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely

> > > available for testing.

> > 

> > I hope that it's not just for testing, but using it.

> 

> sure, I just think that most people will use their own config for production

> but that's a different story. I can rephrase.

> 

> > 

> > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

> > > ---

> > >   arch/arm64/configs/defconfig | 3 ++-

> > >   1 file changed, 2 insertions(+), 1 deletion(-)

> > > 

> > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig

> > > index 1fed16950a7c..830c26a95b3d 100644

> > > --- a/arch/arm64/configs/defconfig

> > > +++ b/arch/arm64/configs/defconfig

> > > @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y

> > >   CONFIG_MUX_MMIO=y

> > >   CONFIG_SLIM_QCOM_CTRL=m

> > >   CONFIG_SLIM_QCOM_NGD_CTRL=m

> > > -CONFIG_INTERCONNECT=y

> > 

> > Why are you removing this line?

> 

> savedefconfig removes it. INTERCONNECT_IMX below depends on it.


It's save to remove it as other Interconnect options are directly
dependant.

Best regards,
Krzysztof
Krzysztof Kozlowski Dec. 2, 2020, 8:05 a.m. UTC | #4
On Wed, 2 Dec 2020 at 10:03, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote:
> > On 01.12.20 14:10, Georgi Djakov wrote:
> > > On 1.12.20 14:39, Martin Kepplinger wrote:
> > > > Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
> > > > available for testing.
> > >
> > > I hope that it's not just for testing, but using it.
> >
> > sure, I just think that most people will use their own config for production
> > but that's a different story. I can rephrase.
> >
> > >
> > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > > > ---
> > > >   arch/arm64/configs/defconfig | 3 ++-
> > > >   1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> > > > index 1fed16950a7c..830c26a95b3d 100644
> > > > --- a/arch/arm64/configs/defconfig
> > > > +++ b/arch/arm64/configs/defconfig
> > > > @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y
> > > >   CONFIG_MUX_MMIO=y
> > > >   CONFIG_SLIM_QCOM_CTRL=m
> > > >   CONFIG_SLIM_QCOM_NGD_CTRL=m
> > > > -CONFIG_INTERCONNECT=y
> > >
> > > Why are you removing this line?
> >
> > savedefconfig removes it. INTERCONNECT_IMX below depends on it.
>
> It's save to remove it as other Interconnect options are directly
> dependant.

Ugh, my bad, it is not allowed to remove it. My review was too fast.
INTERCONNECT_IMX depends on it, so the INTERCONNECT must stay,

It is selected by TEGRA_MC which is independent here, so you should keep it.

Best regards,
Krzysztof
Martin Kepplinger Dec. 2, 2020, 11:27 a.m. UTC | #5
On 02.12.20 09:05, Krzysztof Kozlowski wrote:
> On Wed, 2 Dec 2020 at 10:03, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>
>> On Tue, Dec 01, 2020 at 02:15:04PM +0100, Martin Kepplinger wrote:
>>> On 01.12.20 14:10, Georgi Djakov wrote:
>>>> On 1.12.20 14:39, Martin Kepplinger wrote:
>>>>> Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
>>>>> available for testing.
>>>>
>>>> I hope that it's not just for testing, but using it.
>>>
>>> sure, I just think that most people will use their own config for production
>>> but that's a different story. I can rephrase.
>>>
>>>>
>>>>> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
>>>>> ---
>>>>>    arch/arm64/configs/defconfig | 3 ++-
>>>>>    1 file changed, 2 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>>>>> index 1fed16950a7c..830c26a95b3d 100644
>>>>> --- a/arch/arm64/configs/defconfig
>>>>> +++ b/arch/arm64/configs/defconfig
>>>>> @@ -1023,7 +1023,8 @@ CONFIG_OPTEE=y
>>>>>    CONFIG_MUX_MMIO=y
>>>>>    CONFIG_SLIM_QCOM_CTRL=m
>>>>>    CONFIG_SLIM_QCOM_NGD_CTRL=m
>>>>> -CONFIG_INTERCONNECT=y
>>>>
>>>> Why are you removing this line?
>>>
>>> savedefconfig removes it. INTERCONNECT_IMX below depends on it.
>>
>> It's save to remove it as other Interconnect options are directly
>> dependant.
> 
> Ugh, my bad, it is not allowed to remove it. My review was too fast.
> INTERCONNECT_IMX depends on it, so the INTERCONNECT must stay,
> 
> It is selected by TEGRA_MC which is independent here, so you should keep it.
> 

thanks for reviewing! Just to be clear: We're talking about defconfig, 
so if I keep INTERCONNECT that means that I do `make savedefconfig` 
which removes it (it's of course still enabled, just redundant in 
defconfig output), and then *manually* add INTERCONNECT. That would 
indicate that there's a Kconfig bug.

thanks,
                               martin
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 1fed16950a7c..830c26a95b3d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1023,7 +1023,8 @@  CONFIG_OPTEE=y
 CONFIG_MUX_MMIO=y
 CONFIG_SLIM_QCOM_CTRL=m
 CONFIG_SLIM_QCOM_NGD_CTRL=m
-CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=m
+CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_SDM845=m