diff mbox series

[1/2,v7] dt-bindings: leds: Add DT binding for Richtek RT8515

Message ID 20201201101350.1401956-1-linus.walleij@linaro.org
State Superseded
Headers show
Series [1/2,v7] dt-bindings: leds: Add DT binding for Richtek RT8515 | expand

Commit Message

Linus Walleij Dec. 1, 2020, 10:13 a.m. UTC 
Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v6->v7:
- Use led-max-microamp for the torch mode max current.
- Drop the torch-specific new property from common.yaml in
  favor of this property.
- Collect Sakari's review tag.
ChangeLog v5->v6:
- Use the suffix -ohms for the resistor values as this gets
  recognized by default by dtschema and is nominal.
ChangeLog v4->v5:
- Fix the RFS/RTS resistors to reference the u32 schema.
- Fix resisitor speling error.
ChangeLog v3->v4:
- Add DT attributes for the RFS and RTS resistors, so that
  the hardware-defined maximum current can be determined.
- Add torch-max-microamp to the common bindings so we can
  set an attribute for the max microamp in torch mode.
- Add flash-max-microamp and torch-max-microamp as optional
  to the LED node.
- Slot in some elabortative descriptions of the new
  properties and describe what the hardware is doing.
- Cc phone-devel@vger.kernel.org
ChangeLog v2->v3:
- Add Sakari to CC
- Resend
ChangeLog v1->v2:
- Explicitly inherit function, color and flash-max-timeout-us
  from common.yaml
- Add "led" node as required.
---
 .../bindings/leds/richtek,rt8515.yaml         | 109 ++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/richtek,rt8515.yaml

-- 
2.26.2

Comments

Rob Herring (Arm) Dec. 9, 2020, 4:31 p.m. UTC | #1 
On Tue, Dec 01, 2020 at 11:13:49AM +0100, Linus Walleij wrote:
> Add a YAML devicetree binding for the Richtek RT8515
> dual channel flash/torch LED driver.
> 
> Cc: Sakari Ailus <sakari.ailus@iki.fi>
> Cc: newbytee@protonmail.com
> Cc: Stephan Gerhold <stephan@gerhold.net>
> Cc: phone-devel@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v6->v7:
> - Use led-max-microamp for the torch mode max current.
> - Drop the torch-specific new property from common.yaml in
>   favor of this property.
> - Collect Sakari's review tag.
> ChangeLog v5->v6:
> - Use the suffix -ohms for the resistor values as this gets
>   recognized by default by dtschema and is nominal.
> ChangeLog v4->v5:
> - Fix the RFS/RTS resistors to reference the u32 schema.
> - Fix resisitor speling error.
> ChangeLog v3->v4:
> - Add DT attributes for the RFS and RTS resistors, so that
>   the hardware-defined maximum current can be determined.
> - Add torch-max-microamp to the common bindings so we can
>   set an attribute for the max microamp in torch mode.
> - Add flash-max-microamp and torch-max-microamp as optional
>   to the LED node.
> - Slot in some elabortative descriptions of the new
>   properties and describe what the hardware is doing.
> - Cc phone-devel@vger.kernel.org
> ChangeLog v2->v3:
> - Add Sakari to CC
> - Resend
> ChangeLog v1->v2:
> - Explicitly inherit function, color and flash-max-timeout-us
>   from common.yaml
> - Add "led" node as required.
> ---
>  .../bindings/leds/richtek,rt8515.yaml         | 109 ++++++++++++++++++
>  1 file changed, 109 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
> new file mode 100644
> index 000000000000..3190e4fcfdf2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT8515 1.5A dual channel LED driver
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij@linaro.org>
> +
> +description: |
> +  The Richtek RT8515 is a dual channel (two mode) LED driver that
> +  supports driving a white LED in flash or torch mode. The maximum
> +  current for each mode is defined in hardware using two resistors
> +  RFS and RTS.
> +
> +properties:
> +  compatible:
> +    const: richtek,rt8515
> +
> +  enf-gpios:
> +    maxItems: 1
> +    description: A connection to the 'ENF' (enable flash) pin.
> +
> +  ent-gpios:
> +    maxItems: 1
> +    description: A connection to the 'ENT' (enable torch) pin.
> +
> +  richtek,rfs-ohms:
> +    minimum: 7680
> +    maximum: 367000
> +    description: The resistance value of the RFS resistor. This
> +      resistors limits the maximum flash current. This must be set
> +      for the property flash-max-microamp to work, the RFS resistor
> +      defines the range of the dimmer setting (brightness) of the
> +      flash LED.
> +
> +  richtek,rts-ohms:
> +    minimum: 7680
> +    maximum: 367000
> +    description: The resistance value of the RTS resistor. This
> +      resistors limits the maximum torch current. This must be set
> +      for the property torch-max-microamp to work, the RTS resistor
> +      defines the range of the dimmer setting (brightness) of the
> +      torch LED.
> +
> +  led:
> +    type: object
> +    $ref: common.yaml#

       additionalProperties: false

And then fix the error in the example.

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +    properties:
> +      function: true
> +      color: true
> +      flash-max-timeout-us: true
> +
> +      flash-max-microamp:
> +        maximum: 700000
> +        description: The maximum current for flash mode
> +          is hardwired to the component using the RFS resistor to
> +          ground. The maximum hardware current setting is calculated
> +          according to the formula Imax = 5500 / RFS. The lowest
> +          allowed resistance value is 7.86 kOhm giving an absolute
> +          maximum current of 700mA. By setting this attribute in
> +          the device tree, you can further restrict the maximum
> +          current below the hardware limit. This requires the RFS
> +          to be defined as it defines the maximum range.
> +
> +      led-max-microamp:
> +        maximum: 700000
> +        description: The maximum current for torch mode
> +          is hardwired to the component using the RTS resistor to
> +          ground. The maximum hardware current setting is calculated
> +          according to the formula Imax = 5500 / RTS. The lowest
> +          allowed resistance value is 7.86 kOhm giving an absolute
> +          maximum current of 700mA. By setting this attribute in
> +          the device tree, you can further restrict the maximum
> +          current below the hardware limit. This requires the RTS
> +          to be defined as it defines the maximum range.
> +
> +required:
> +  - compatible
> +  - ent-gpios
> +  - enf-gpios
> +  - led
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
> +
> +    led-controller {
> +        compatible = "richtek,rt8515";
> +        enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> +        ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
> +        richtek,rfs-ohms = <16000>;
> +        richtek,rts-ohms = <100000>;
> +
> +        led {
> +            function = LED_FUNCTION_FLASH;
> +            color = <LED_COLOR_ID_WHITE>;
> +            flash-max-timeout-us = <250000>;
> +            flash-max-microamp = <150000>;
> +            torch-max-microamp = <25000>;

hint ^^^

> +        };
> +    };
> +
> +...
> -- 
> 2.26.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
new file mode 100644
index 000000000000..3190e4fcfdf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
@@ -0,0 +1,109 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT8515 1.5A dual channel LED driver
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Richtek RT8515 is a dual channel (two mode) LED driver that
+  supports driving a white LED in flash or torch mode. The maximum
+  current for each mode is defined in hardware using two resistors
+  RFS and RTS.
+
+properties:
+  compatible:
+    const: richtek,rt8515
+
+  enf-gpios:
+    maxItems: 1
+    description: A connection to the 'ENF' (enable flash) pin.
+
+  ent-gpios:
+    maxItems: 1
+    description: A connection to the 'ENT' (enable torch) pin.
+
+  richtek,rfs-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RFS resistor. This
+      resistors limits the maximum flash current. This must be set
+      for the property flash-max-microamp to work, the RFS resistor
+      defines the range of the dimmer setting (brightness) of the
+      flash LED.
+
+  richtek,rts-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RTS resistor. This
+      resistors limits the maximum torch current. This must be set
+      for the property torch-max-microamp to work, the RTS resistor
+      defines the range of the dimmer setting (brightness) of the
+      torch LED.
+
+  led:
+    type: object
+    $ref: common.yaml#
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us: true
+
+      flash-max-microamp:
+        maximum: 700000
+        description: The maximum current for flash mode
+          is hardwired to the component using the RFS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RFS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RFS
+          to be defined as it defines the maximum range.
+
+      led-max-microamp:
+        maximum: 700000
+        description: The maximum current for torch mode
+          is hardwired to the component using the RTS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RTS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RTS
+          to be defined as it defines the maximum range.
+
+required:
+  - compatible
+  - ent-gpios
+  - enf-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "richtek,rt8515";
+        enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+        ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+        richtek,rfs-ohms = <16000>;
+        richtek,rts-ohms = <100000>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+            flash-max-microamp = <150000>;
+            torch-max-microamp = <25000>;
+        };
+    };
+
+...