| Message ID | 1606533966-22821-5-git-send-email-hemantk@codeaurora.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | userspace MHI client interface driver | expand |
Hi Hemant, On Fri, Nov 27, 2020 at 07:26:06PM -0800, Hemant Kumar wrote: > This MHI client driver allows userspace clients to transfer > raw data between MHI device and host using standard file operations. > Driver instantiates UCI device object which is associated to device > file node. UCI device object instantiates UCI channel object when device > file node is opened. UCI channel object is used to manage MHI channels > by calling MHI core APIs for read and write operations. MHI channels > are started as part of device open(). MHI channels remain in start > state until last release() is called on UCI device file node. Device > file node is created with format > > /dev/mhi_<mhi_device_name> > > Currently it supports QMI channel. > Thanks for the update. This patch looks good to me. But as I'm going to apply Loic's "bus: mhi: core: Indexed MHI controller name" patch, you need to update the documentation accordingly. > Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > drivers/bus/mhi/Kconfig | 13 + > drivers/bus/mhi/Makefile | 3 + > drivers/bus/mhi/uci.c | 665 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 681 insertions(+) > create mode 100644 drivers/bus/mhi/uci.c > > diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig > index da5cd0c..5194e8e 100644 > --- a/drivers/bus/mhi/Kconfig > +++ b/drivers/bus/mhi/Kconfig > @@ -29,3 +29,16 @@ config MHI_BUS_PCI_GENERIC > This driver provides MHI PCI controller driver for devices such as > Qualcomm SDX55 based PCIe modems. > > +config MHI_UCI > + tristate "MHI UCI" > + depends on MHI_BUS > + help > + MHI based Userspace Client Interface (UCI) driver is used for > + transferring raw data between host and device using standard file > + operations from userspace. Open, read, write, poll and close > + operations are supported by this driver. Please check > + mhi_uci_match_table for all supported channels that are exposed to > + userspace. > + > + To compile this driver as a module, choose M here: the module will be > + called mhi_uci. > diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile > index 0a2d778..69f2111 100644 > --- a/drivers/bus/mhi/Makefile > +++ b/drivers/bus/mhi/Makefile > @@ -4,3 +4,6 @@ obj-y += core/ > obj-$(CONFIG_MHI_BUS_PCI_GENERIC) += mhi_pci_generic.o > mhi_pci_generic-y += pci_generic.o > > +# MHI client > +mhi_uci-y := uci.o > +obj-$(CONFIG_MHI_UCI) += mhi_uci.o > diff --git a/drivers/bus/mhi/uci.c b/drivers/bus/mhi/uci.c > new file mode 100644 > index 0000000..fb9c183 > --- /dev/null > +++ b/drivers/bus/mhi/uci.c > @@ -0,0 +1,665 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.*/ > + > +#include <linux/kernel.h> > +#include <linux/mhi.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/poll.h> > + > +#define MHI_DEVICE_NAME "mhi" > +#define MHI_UCI_DRIVER_NAME "mhi_uci" > +#define MHI_MAX_UCI_MINORS 128 > + > +static DEFINE_IDR(uci_idr); > +static DEFINE_MUTEX(uci_drv_mutex); > +static struct class *uci_dev_class; > +static int uci_dev_major; > + > +/** > + * struct uci_chan - MHI channel for a UCI device > + * @udev: associated UCI device object > + * @ul_wq: wait queue for writer > + * @write_lock: mutex write lock for ul channel > + * @dl_wq: wait queue for reader > + * @read_lock: mutex read lock for dl channel > + * @dl_pending_lock: spin lock for dl_pending list > + * @dl_pending: list of dl buffers userspace is waiting to read > + * @cur_buf: current buffer userspace is reading > + * @dl_size: size of the current dl buffer userspace is reading > + * @ref_count: uci_chan reference count > + */ > +struct uci_chan { > + struct uci_dev *udev; > + wait_queue_head_t ul_wq; > + > + /* ul channel lock to synchronize multiple writes */ > + struct mutex write_lock; > + > + wait_queue_head_t dl_wq; > + > + /* dl channel lock to synchronize multiple reads */ > + struct mutex read_lock; > + > + /* > + * protects pending list in bh context, channel release, read and > + * poll > + */ > + spinlock_t dl_pending_lock; > + > + struct list_head dl_pending; > + struct uci_buf *cur_buf; > + size_t dl_size; > + struct kref ref_count; > +}; > + > +/** > + * struct uci_buf - UCI buffer > + * @data: data buffer > + * @len: length of data buffer > + * @node: list node of the UCI buffer > + */ > +struct uci_buf { > + void *data; > + size_t len; > + struct list_head node; > +}; > + > +/** > + * struct uci_dev - MHI UCI device > + * @minor: UCI device node minor number > + * @mhi_dev: associated mhi device object > + * @uchan: UCI uplink and downlink channel object > + * @mtu: max TRE buffer length > + * @enabled: Flag to track the state of the UCI device > + * @lock: mutex lock to manage uchan object > + * @ref_count: uci_dev reference count > + */ > +struct uci_dev { > + unsigned int minor; > + struct mhi_device *mhi_dev; > + struct uci_chan *uchan; > + size_t mtu; > + bool enabled; > + > + /* synchronize open, release and driver remove */ > + struct mutex lock; > + struct kref ref_count; > +}; > + > +static void mhi_uci_dev_chan_release(struct kref *ref) > +{ > + struct uci_buf *buf_itr, *tmp; > + struct uci_chan *uchan = > + container_of(ref, struct uci_chan, ref_count); > + > + if (uchan->udev->enabled) > + mhi_unprepare_from_transfer(uchan->udev->mhi_dev); > + > + spin_lock_bh(&uchan->dl_pending_lock); > + list_for_each_entry_safe(buf_itr, tmp, &uchan->dl_pending, node) { > + list_del(&buf_itr->node); > + kfree(buf_itr->data); > + } > + spin_unlock_bh(&uchan->dl_pending_lock); > + > + wake_up(&uchan->ul_wq); > + wake_up(&uchan->dl_wq); > + > + mutex_lock(&uchan->read_lock); > + if (uchan->cur_buf) > + kfree(uchan->cur_buf->data); > + > + uchan->cur_buf = NULL; > + mutex_unlock(&uchan->read_lock); > + > + mutex_destroy(&uchan->write_lock); > + mutex_destroy(&uchan->read_lock); > + > + uchan->udev->uchan = NULL; > + kfree(uchan); > +} > + > +static int mhi_queue_inbound(struct uci_dev *udev) > +{ > + struct mhi_device *mhi_dev = udev->mhi_dev; > + struct device *dev = &mhi_dev->dev; > + int nr_desc, i, ret = -EIO; > + size_t dl_buf_size; > + void *buf; > + struct uci_buf *ubuf; > + > + /* > + * skip queuing without error if dl channel is not supported. This > + * allows open to succeed for udev, supporting ul only channel. > + */ > + if (!udev->mhi_dev->dl_chan) > + return 0; > + > + nr_desc = mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE); > + > + for (i = 0; i < nr_desc; i++) { > + buf = kmalloc(udev->mtu, GFP_KERNEL); > + if (!buf) > + return -ENOMEM; > + > + dl_buf_size = udev->mtu - sizeof(*ubuf); > + > + /* save uci_buf info at the end of buf */ > + ubuf = buf + dl_buf_size; > + ubuf->data = buf; > + > + dev_dbg(dev, "Allocated buf %d of %d size %zu\n", i, nr_desc, > + dl_buf_size); > + > + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, buf, dl_buf_size, > + MHI_EOT); > + if (ret) { > + kfree(buf); > + dev_err(dev, "Failed to queue buffer %d\n", i); > + return ret; > + } > + } > + > + return ret; > +} > + > +static int mhi_uci_dev_start_chan(struct uci_dev *udev) > +{ > + int ret = 0; > + struct uci_chan *uchan; > + > + mutex_lock(&udev->lock); > + if (!udev->uchan || !kref_get_unless_zero(&udev->uchan->ref_count)) { > + uchan = kzalloc(sizeof(*uchan), GFP_KERNEL); > + if (!uchan) { > + ret = -ENOMEM; > + goto error_chan_start; > + } > + > + udev->uchan = uchan; > + uchan->udev = udev; > + init_waitqueue_head(&uchan->ul_wq); > + init_waitqueue_head(&uchan->dl_wq); > + mutex_init(&uchan->write_lock); > + mutex_init(&uchan->read_lock); > + spin_lock_init(&uchan->dl_pending_lock); > + INIT_LIST_HEAD(&uchan->dl_pending); > + > + ret = mhi_prepare_for_transfer(udev->mhi_dev); > + if (ret) { > + dev_err(&udev->mhi_dev->dev, "Error starting transfer channels\n"); > + goto error_chan_cleanup; > + } > + > + ret = mhi_queue_inbound(udev); > + if (ret) > + goto error_chan_cleanup; > + > + kref_init(&uchan->ref_count); > + } > + > + mutex_unlock(&udev->lock); > + > + return 0; > + > +error_chan_cleanup: > + mhi_uci_dev_chan_release(&uchan->ref_count); > +error_chan_start: > + mutex_unlock(&udev->lock); > + return ret; > +} > + > +static void mhi_uci_dev_release(struct kref *ref) > +{ > + struct uci_dev *udev = > + container_of(ref, struct uci_dev, ref_count); > + > + mutex_destroy(&udev->lock); > + > + kfree(udev); > +} > + > +static int mhi_uci_open(struct inode *inode, struct file *filp) > +{ > + unsigned int minor = iminor(inode); > + struct uci_dev *udev = NULL; > + int ret; > + > + mutex_lock(&uci_drv_mutex); > + udev = idr_find(&uci_idr, minor); > + if (!udev) { > + pr_debug("uci dev: minor %d not found\n", minor); > + mutex_unlock(&uci_drv_mutex); > + return -ENODEV; > + } > + > + kref_get(&udev->ref_count); > + mutex_unlock(&uci_drv_mutex); > + > + ret = mhi_uci_dev_start_chan(udev); > + if (ret) { > + kref_put(&udev->ref_count, mhi_uci_dev_release); > + return ret; > + } > + > + filp->private_data = udev; > + > + return 0; > +} > + > +static int mhi_uci_release(struct inode *inode, struct file *file) > +{ > + struct uci_dev *udev = file->private_data; > + > + mutex_lock(&udev->lock); > + kref_put(&udev->uchan->ref_count, mhi_uci_dev_chan_release); > + mutex_unlock(&udev->lock); > + > + kref_put(&udev->ref_count, mhi_uci_dev_release); > + > + return 0; > +} > + > +static __poll_t mhi_uci_poll(struct file *file, poll_table *wait) > +{ > + struct uci_dev *udev = file->private_data; > + struct mhi_device *mhi_dev = udev->mhi_dev; > + struct device *dev = &mhi_dev->dev; > + struct uci_chan *uchan = udev->uchan; > + __poll_t mask = 0; > + > + poll_wait(file, &udev->uchan->ul_wq, wait); > + poll_wait(file, &udev->uchan->dl_wq, wait); > + > + if (!udev->enabled) { > + mask = EPOLLERR; > + goto done; > + } > + > + spin_lock_bh(&uchan->dl_pending_lock); > + if (!list_empty(&uchan->dl_pending) || uchan->cur_buf) > + mask |= EPOLLIN | EPOLLRDNORM; > + spin_unlock_bh(&uchan->dl_pending_lock); > + > + if (mhi_get_free_desc_count(mhi_dev, DMA_TO_DEVICE) > 0) > + mask |= EPOLLOUT | EPOLLWRNORM; > + > + dev_dbg(dev, "Client attempted to poll, returning mask 0x%x\n", mask); > + > +done: > + return mask; > +} > + > +static ssize_t mhi_uci_write(struct file *file, > + const char __user *buf, > + size_t count, > + loff_t *offp) > +{ > + struct uci_dev *udev = file->private_data; > + struct mhi_device *mhi_dev = udev->mhi_dev; > + struct device *dev = &mhi_dev->dev; > + struct uci_chan *uchan = udev->uchan; > + size_t bytes_xfered = 0; > + int ret, nr_desc = 0; > + > + /* if ul channel is not supported return error */ > + if (!mhi_dev->ul_chan) > + return -EOPNOTSUPP; > + > + if (!buf || !count) > + return -EINVAL; > + > + dev_dbg(dev, "%s: to xfer: %zu bytes\n", __func__, count); > + > + if (mutex_lock_interruptible(&uchan->write_lock)) > + return -EINTR; > + > + while (count) { > + size_t xfer_size; > + void *kbuf; > + enum mhi_flags flags; > + > + /* wait for free descriptors */ > + ret = wait_event_interruptible(uchan->ul_wq, > + (!udev->enabled) || > + (nr_desc = mhi_get_free_desc_count(mhi_dev, > + DMA_TO_DEVICE)) > 0); > + > + if (ret == -ERESTARTSYS) { > + dev_dbg(dev, "Interrupted by a signal in %s, exiting\n", > + __func__); > + goto err_mtx_unlock; > + } > + > + if (!udev->enabled) { > + ret = -ENODEV; > + goto err_mtx_unlock; > + } > + > + xfer_size = min_t(size_t, count, udev->mtu); > + kbuf = kmalloc(xfer_size, GFP_KERNEL); > + if (!kbuf) { > + ret = -ENOMEM; > + goto err_mtx_unlock; > + } > + > + ret = copy_from_user(kbuf, buf, xfer_size); > + if (ret) { > + kfree(kbuf); > + ret = -EFAULT; > + goto err_mtx_unlock; > + } > + > + /* if ring is full after this force EOT */ > + if (nr_desc > 1 && (count - xfer_size)) > + flags = MHI_CHAIN; > + else > + flags = MHI_EOT; > + > + ret = mhi_queue_buf(mhi_dev, DMA_TO_DEVICE, kbuf, xfer_size, > + flags); > + if (ret) { > + kfree(kbuf); > + goto err_mtx_unlock; > + } > + > + bytes_xfered += xfer_size; > + count -= xfer_size; > + buf += xfer_size; > + } > + > + mutex_unlock(&uchan->write_lock); > + dev_dbg(dev, "%s: bytes xferred: %zu\n", __func__, bytes_xfered); > + > + return bytes_xfered; > + > +err_mtx_unlock: > + mutex_unlock(&uchan->write_lock); > + > + return ret; > +} > + > +static ssize_t mhi_uci_read(struct file *file, > + char __user *buf, > + size_t count, > + loff_t *ppos) > +{ > + struct uci_dev *udev = file->private_data; > + struct mhi_device *mhi_dev = udev->mhi_dev; > + struct uci_chan *uchan = udev->uchan; > + struct device *dev = &mhi_dev->dev; > + struct uci_buf *ubuf; > + size_t rx_buf_size; > + char *ptr; > + size_t to_copy; > + int ret = 0; > + > + /* if dl channel is not supported return error */ > + if (!mhi_dev->dl_chan) > + return -EOPNOTSUPP; > + > + if (!buf) > + return -EINVAL; > + > + if (mutex_lock_interruptible(&uchan->read_lock)) > + return -EINTR; > + > + spin_lock_bh(&uchan->dl_pending_lock); > + /* No data available to read, wait */ > + if (!uchan->cur_buf && list_empty(&uchan->dl_pending)) { > + dev_dbg(dev, "No data available to read, waiting\n"); > + > + spin_unlock_bh(&uchan->dl_pending_lock); > + ret = wait_event_interruptible(uchan->dl_wq, > + (!udev->enabled || > + !list_empty(&uchan->dl_pending))); > + > + if (ret == -ERESTARTSYS) { > + dev_dbg(dev, "Interrupted by a signal in %s, exiting\n", > + __func__); > + goto err_mtx_unlock; > + } > + > + if (!udev->enabled) { > + ret = -ENODEV; > + goto err_mtx_unlock; > + } > + spin_lock_bh(&uchan->dl_pending_lock); > + } > + > + /* new read, get the next descriptor from the list */ > + if (!uchan->cur_buf) { > + ubuf = list_first_entry_or_null(&uchan->dl_pending, > + struct uci_buf, node); > + if (!ubuf) { > + ret = -EIO; > + goto err_spin_unlock; > + } > + > + list_del(&ubuf->node); > + uchan->cur_buf = ubuf; > + uchan->dl_size = ubuf->len; > + dev_dbg(dev, "Got pkt of size: %zu\n", uchan->dl_size); > + } > + spin_unlock_bh(&uchan->dl_pending_lock); > + > + ubuf = uchan->cur_buf; > + > + /* Copy the buffer to user space */ > + to_copy = min_t(size_t, count, uchan->dl_size); > + ptr = ubuf->data + (ubuf->len - uchan->dl_size); > + > + ret = copy_to_user(buf, ptr, to_copy); > + if (ret) { > + ret = -EFAULT; > + goto err_mtx_unlock; > + } > + > + dev_dbg(dev, "Copied %zu of %zu bytes\n", to_copy, uchan->dl_size); > + uchan->dl_size -= to_copy; > + > + /* we finished with this buffer, queue it back to hardware */ > + if (!uchan->dl_size) { > + uchan->cur_buf = NULL; > + > + rx_buf_size = udev->mtu - sizeof(*ubuf); > + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, ubuf->data, > + rx_buf_size, MHI_EOT); > + if (ret) { > + dev_err(dev, "Failed to recycle element: %d\n", ret); > + kfree(ubuf->data); > + goto err_mtx_unlock; > + } > + } > + mutex_unlock(&uchan->read_lock); > + > + dev_dbg(dev, "%s: Returning %zu bytes\n", __func__, to_copy); > + > + return to_copy; > + > +err_spin_unlock: > + spin_unlock_bh(&uchan->dl_pending_lock); > +err_mtx_unlock: > + mutex_unlock(&uchan->read_lock); > + return ret; > +} > + > +static const struct file_operations mhidev_fops = { > + .owner = THIS_MODULE, > + .open = mhi_uci_open, > + .release = mhi_uci_release, > + .read = mhi_uci_read, > + .write = mhi_uci_write, > + .poll = mhi_uci_poll, > +}; > + > +static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev, > + struct mhi_result *mhi_result) > +{ > + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); > + struct uci_chan *uchan = udev->uchan; > + struct device *dev = &mhi_dev->dev; > + > + dev_dbg(dev, "%s: status: %d xfer_len: %zu\n", __func__, > + mhi_result->transaction_status, mhi_result->bytes_xferd); > + > + kfree(mhi_result->buf_addr); > + > + if (!mhi_result->transaction_status) > + wake_up(&uchan->ul_wq); > +} > + > +static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev, > + struct mhi_result *mhi_result) > +{ > + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); > + struct uci_chan *uchan = udev->uchan; > + struct device *dev = &mhi_dev->dev; > + struct uci_buf *ubuf; > + size_t dl_buf_size = udev->mtu - sizeof(*ubuf); > + > + dev_dbg(dev, "%s: status: %d receive_len: %zu\n", __func__, > + mhi_result->transaction_status, mhi_result->bytes_xferd); > + > + if (mhi_result->transaction_status && > + mhi_result->transaction_status != -EOVERFLOW) { > + kfree(mhi_result->buf_addr); > + return; > + } > + > + ubuf = mhi_result->buf_addr + dl_buf_size; > + ubuf->data = mhi_result->buf_addr; > + ubuf->len = mhi_result->bytes_xferd; > + spin_lock_bh(&uchan->dl_pending_lock); > + list_add_tail(&ubuf->node, &uchan->dl_pending); > + spin_unlock_bh(&uchan->dl_pending_lock); > + > + wake_up(&uchan->dl_wq); > +} > + > +static int mhi_uci_probe(struct mhi_device *mhi_dev, > + const struct mhi_device_id *id) > +{ > + struct uci_dev *udev; > + struct device *dev; > + int index; > + > + udev = kzalloc(sizeof(*udev), GFP_KERNEL); > + if (!udev) > + return -ENOMEM; > + > + kref_init(&udev->ref_count); > + mutex_init(&udev->lock); > + udev->mhi_dev = mhi_dev; > + > + mutex_lock(&uci_drv_mutex); > + index = idr_alloc(&uci_idr, udev, 0, MHI_MAX_UCI_MINORS, GFP_KERNEL); > + mutex_unlock(&uci_drv_mutex); > + if (index < 0) { > + kfree(udev); > + return index; > + } > + > + udev->minor = index; > + > + udev->mtu = min_t(size_t, id->driver_data, MHI_MAX_MTU); > + dev_set_drvdata(&mhi_dev->dev, udev); > + udev->enabled = true; > + > + /* create device file node /dev/mhi_<mhi_dev_name> */ > + dev = device_create(uci_dev_class, &mhi_dev->dev, > + MKDEV(uci_dev_major, index), udev, > + MHI_DEVICE_NAME "_%s", dev_name(&mhi_dev->dev)); > + if (IS_ERR(dev)) { > + mutex_lock(&uci_drv_mutex); > + idr_remove(&uci_idr, udev->minor); > + mutex_unlock(&uci_drv_mutex); > + dev_set_drvdata(&mhi_dev->dev, NULL); > + kfree(udev); > + return PTR_ERR(dev); > + } > + > + dev_dbg(&mhi_dev->dev, "probed uci dev: %s\n", id->chan); > + > + return 0; > +}; > + > +static void mhi_uci_remove(struct mhi_device *mhi_dev) > +{ > + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); > + > + /* disable the node */ > + mutex_lock(&udev->lock); > + udev->enabled = false; > + > + /* delete the node to prevent new opens */ > + device_destroy(uci_dev_class, MKDEV(uci_dev_major, udev->minor)); > + > + /* return error for any blocked read or write */ > + if (udev->uchan) { > + wake_up(&udev->uchan->ul_wq); > + wake_up(&udev->uchan->dl_wq); > + } > + mutex_unlock(&udev->lock); > + > + mutex_lock(&uci_drv_mutex); > + idr_remove(&uci_idr, udev->minor); > + kref_put(&udev->ref_count, mhi_uci_dev_release); > + mutex_unlock(&uci_drv_mutex); > +} > + > +/* .driver_data stores max mtu */ > +static const struct mhi_device_id mhi_uci_match_table[] = { > + { .chan = "QMI", .driver_data = 0x1000}, > + {}, > +}; > +MODULE_DEVICE_TABLE(mhi, mhi_uci_match_table); > + > +static struct mhi_driver mhi_uci_driver = { > + .id_table = mhi_uci_match_table, > + .remove = mhi_uci_remove, > + .probe = mhi_uci_probe, > + .ul_xfer_cb = mhi_ul_xfer_cb, > + .dl_xfer_cb = mhi_dl_xfer_cb, > + .driver = { > + .name = MHI_UCI_DRIVER_NAME, > + }, > +}; > + > +static int __init mhi_uci_init(void) > +{ > + int ret; > + > + ret = register_chrdev(0, MHI_UCI_DRIVER_NAME, &mhidev_fops); > + if (ret < 0) > + return ret; > + > + uci_dev_major = ret; > + uci_dev_class = class_create(THIS_MODULE, MHI_UCI_DRIVER_NAME); > + if (IS_ERR(uci_dev_class)) { > + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); > + return PTR_ERR(uci_dev_class); > + } > + > + ret = mhi_driver_register(&mhi_uci_driver); > + if (ret) { > + class_destroy(uci_dev_class); > + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); > + } > + > + return ret; > +} > + > +static void __exit mhi_uci_exit(void) > +{ > + mhi_driver_unregister(&mhi_uci_driver); > + class_destroy(uci_dev_class); > + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); > + idr_destroy(&uci_idr); > +} > + > +module_init(mhi_uci_init); > +module_exit(mhi_uci_exit); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("MHI UCI Driver"); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: > > This MHI client driver allows userspace clients to transfer > raw data between MHI device and host using standard file operations. > Driver instantiates UCI device object which is associated to device > file node. UCI device object instantiates UCI channel object when device > file node is opened. UCI channel object is used to manage MHI channels > by calling MHI core APIs for read and write operations. MHI channels > are started as part of device open(). MHI channels remain in start > state until last release() is called on UCI device file node. Device > file node is created with format [...] > +struct uci_chan { > + struct uci_dev *udev; > + wait_queue_head_t ul_wq; > + > + /* ul channel lock to synchronize multiple writes */ > + struct mutex write_lock; > + > + wait_queue_head_t dl_wq; > + > + /* dl channel lock to synchronize multiple reads */ > + struct mutex read_lock; > + > + /* > + * protects pending list in bh context, channel release, read and > + * poll > + */ > + spinlock_t dl_pending_lock; > + > + struct list_head dl_pending; > + struct uci_buf *cur_buf; > + size_t dl_size; > + struct kref ref_count; > +}; [...] > + * struct uci_dev - MHI UCI device > + * @minor: UCI device node minor number > + * @mhi_dev: associated mhi device object > + * @uchan: UCI uplink and downlink channel object > + * @mtu: max TRE buffer length > + * @enabled: Flag to track the state of the UCI device > + * @lock: mutex lock to manage uchan object > + * @ref_count: uci_dev reference count > + */ > +struct uci_dev { > + unsigned int minor; > + struct mhi_device *mhi_dev; > + struct uci_chan *uchan; Why a pointer to uci_chan and not just plainly integrating the structure here, AFAIU uci_chan describes the channels and is just a subpart of uci_dev. That would reduce the number of dynamic allocations you manage and the extra kref. do you even need a separate structure for this? [...] > +static int mhi_uci_dev_start_chan(struct uci_dev *udev) > +{ > + int ret = 0; > + struct uci_chan *uchan; > + > + mutex_lock(&udev->lock); > + if (!udev->uchan || !kref_get_unless_zero(&udev->uchan->ref_count)) { This test is suspicious, kref_get_unless_zero should be enough to test, right? if (kref_get_unless_zero(&udev->ref)) goto skip_init; > + uchan = kzalloc(sizeof(*uchan), GFP_KERNEL); > + if (!uchan) { > + ret = -ENOMEM; > + goto error_chan_start; > + } > + > + udev->uchan = uchan; > + uchan->udev = udev; > + init_waitqueue_head(&uchan->ul_wq); > + init_waitqueue_head(&uchan->dl_wq); > + mutex_init(&uchan->write_lock); > + mutex_init(&uchan->read_lock); > + spin_lock_init(&uchan->dl_pending_lock); > + INIT_LIST_HEAD(&uchan->dl_pending); > + > + ret = mhi_prepare_for_transfer(udev->mhi_dev); > + if (ret) { > + dev_err(&udev->mhi_dev->dev, "Error starting transfer channels\n"); > + goto error_chan_cleanup; > + } > + > + ret = mhi_queue_inbound(udev); > + if (ret) > + goto error_chan_cleanup; > + > + kref_init(&uchan->ref_count); > + } > + > + mutex_unlock(&udev->lock); > + > + return 0; > + > +error_chan_cleanup: > + mhi_uci_dev_chan_release(&uchan->ref_count); > +error_chan_start: > + mutex_unlock(&udev->lock); > + return ret; > +} Regards, Loic
Hi Mani, On 11/27/20 10:11 PM, Manivannan Sadhasivam wrote: > Hi Hemant, > > On Fri, Nov 27, 2020 at 07:26:06PM -0800, Hemant Kumar wrote: >> This MHI client driver allows userspace clients to transfer >> raw data between MHI device and host using standard file operations. >> Driver instantiates UCI device object which is associated to device >> file node. UCI device object instantiates UCI channel object when device >> file node is opened. UCI channel object is used to manage MHI channels >> by calling MHI core APIs for read and write operations. MHI channels >> are started as part of device open(). MHI channels remain in start >> state until last release() is called on UCI device file node. Device >> file node is created with format >> >> /dev/mhi_<mhi_device_name> >> >> Currently it supports QMI channel. >> > > Thanks for the update. This patch looks good to me. But as I'm going to > apply Loic's "bus: mhi: core: Indexed MHI controller name" patch, you > need to update the documentation accordingly. This is what i added in documentation on v13 Device file node is created with format:- /dev/mhi_<mhi_device_name> mhi_device_name includes mhi controller name and the name of the MHI channel being used by MHI client in userspace to send or receive data using MHI protocol. Loic's patch is going to update the controller name as indexed controller name, which goes fine with or without his change going first. For example: With Loic's change name of device node would be /dev/mhi_mhi0_QMI Without Loic's change it would be /dev/mhi_0000:00:01.2_QMI Please let me know if i am missing something. Thanks, Hemant > >> Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Thanks, > Mani > [..] -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Hi Loic, On 11/30/20 10:22 AM, Loic Poulain wrote: > On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: >> >> This MHI client driver allows userspace clients to transfer >> raw data between MHI device and host using standard file operations. >> Driver instantiates UCI device object which is associated to device >> file node. UCI device object instantiates UCI channel object when device >> file node is opened. UCI channel object is used to manage MHI channels >> by calling MHI core APIs for read and write operations. MHI channels >> are started as part of device open(). MHI channels remain in start >> state until last release() is called on UCI device file node. Device >> file node is created with format > > [...] > >> +struct uci_chan { >> + struct uci_dev *udev; >> + wait_queue_head_t ul_wq; >> + >> + /* ul channel lock to synchronize multiple writes */ >> + struct mutex write_lock; >> + >> + wait_queue_head_t dl_wq; >> + >> + /* dl channel lock to synchronize multiple reads */ >> + struct mutex read_lock; >> + >> + /* >> + * protects pending list in bh context, channel release, read and >> + * poll >> + */ >> + spinlock_t dl_pending_lock; >> + >> + struct list_head dl_pending; >> + struct uci_buf *cur_buf; >> + size_t dl_size; >> + struct kref ref_count; >> +}; > > [...] > >> + * struct uci_dev - MHI UCI device >> + * @minor: UCI device node minor number >> + * @mhi_dev: associated mhi device object >> + * @uchan: UCI uplink and downlink channel object >> + * @mtu: max TRE buffer length >> + * @enabled: Flag to track the state of the UCI device >> + * @lock: mutex lock to manage uchan object >> + * @ref_count: uci_dev reference count >> + */ >> +struct uci_dev { >> + unsigned int minor; >> + struct mhi_device *mhi_dev; >> + struct uci_chan *uchan; > > Why a pointer to uci_chan and not just plainly integrating the > structure here, AFAIU uci_chan describes the channels and is just a > subpart of uci_dev. That would reduce the number of dynamic > allocations you manage and the extra kref. do you even need a separate > structure for this? This goes back to one of my patch versions i tried to address concern from Greg. Since we need to ref count the channel as well as the uci device i decoupled the two objects and used two reference counts for two different objects. Copying from V7 patch history V7: - Decoupled uci device and uci channel objects. uci device is associated with device file node. uci channel is associated with MHI channels. uci device refers to uci channel to perform MHI channel operations for device file operations like read() and write(). uci device increments its reference count for every open(). uci device calls mhi_uci_dev_start_chan() to start the MHI channel. uci channel object is tracking number of times MHI channel is referred. This allows to keep the MHI channel in start state until last release() is called. After that uci channel reference count goes to 0 and uci channel clean up is performed which stops the MHI channel. After the last call to release() if driver is removed uci reference count becomes 0 and uci object is cleaned up. > > [...] > >> +static int mhi_uci_dev_start_chan(struct uci_dev *udev) >> +{ >> + int ret = 0; >> + struct uci_chan *uchan; >> + >> + mutex_lock(&udev->lock); >> + if (!udev->uchan || !kref_get_unless_zero(&udev->uchan->ref_count)) { > > This test is suspicious, kref_get_unless_zero should be enough to test, right? kref_get_unless_zero is de-referencing uchan->ref_count for the first open uchan is set to NULL, for that NULL check is added for uchan. > > if (kref_get_unless_zero(&udev->ref)) > goto skip_init; > >> + uchan = kzalloc(sizeof(*uchan), GFP_KERNEL); >> + if (!uchan) { >> + ret = -ENOMEM; >> + goto error_chan_start; >> + } >> + >> + udev->uchan = uchan; >> + uchan->udev = udev; >> + init_waitqueue_head(&uchan->ul_wq); >> + init_waitqueue_head(&uchan->dl_wq); >> + mutex_init(&uchan->write_lock); >> + mutex_init(&uchan->read_lock); >> + spin_lock_init(&uchan->dl_pending_lock); >> + INIT_LIST_HEAD(&uchan->dl_pending); >> + >> + ret = mhi_prepare_for_transfer(udev->mhi_dev); >> + if (ret) { >> + dev_err(&udev->mhi_dev->dev, "Error starting transfer channels\n"); >> + goto error_chan_cleanup; >> + } >> + >> + ret = mhi_queue_inbound(udev); >> + if (ret) >> + goto error_chan_cleanup; >> + >> + kref_init(&uchan->ref_count); >> + } >> + >> + mutex_unlock(&udev->lock); >> + >> + return 0; >> + >> +error_chan_cleanup: >> + mhi_uci_dev_chan_release(&uchan->ref_count); >> +error_chan_start: >> + mutex_unlock(&udev->lock); >> + return ret; >> +} > > Regards, > Loic > Thanks, Hemant
On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: > > Hi Loic, > > On 11/30/20 10:22 AM, Loic Poulain wrote: > > On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: > >> > >> This MHI client driver allows userspace clients to transfer > >> raw data between MHI device and host using standard file operations. > >> Driver instantiates UCI device object which is associated to device > >> file node. UCI device object instantiates UCI channel object when device > >> file node is opened. UCI channel object is used to manage MHI channels > >> by calling MHI core APIs for read and write operations. MHI channels > >> are started as part of device open(). MHI channels remain in start > >> state until last release() is called on UCI device file node. Device > >> file node is created with format > > > > [...] > > > >> +struct uci_chan { > >> + struct uci_dev *udev; > >> + wait_queue_head_t ul_wq; > >> + > >> + /* ul channel lock to synchronize multiple writes */ > >> + struct mutex write_lock; > >> + > >> + wait_queue_head_t dl_wq; > >> + > >> + /* dl channel lock to synchronize multiple reads */ > >> + struct mutex read_lock; > >> + > >> + /* > >> + * protects pending list in bh context, channel release, read and > >> + * poll > >> + */ > >> + spinlock_t dl_pending_lock; > >> + > >> + struct list_head dl_pending; > >> + struct uci_buf *cur_buf; > >> + size_t dl_size; > >> + struct kref ref_count; > >> +}; > > > > [...] > > > >> + * struct uci_dev - MHI UCI device > >> + * @minor: UCI device node minor number > >> + * @mhi_dev: associated mhi device object > >> + * @uchan: UCI uplink and downlink channel object > >> + * @mtu: max TRE buffer length > >> + * @enabled: Flag to track the state of the UCI device > >> + * @lock: mutex lock to manage uchan object > >> + * @ref_count: uci_dev reference count > >> + */ > >> +struct uci_dev { > >> + unsigned int minor; > >> + struct mhi_device *mhi_dev; > >> + struct uci_chan *uchan; > > > > Why a pointer to uci_chan and not just plainly integrating the > > structure here, AFAIU uci_chan describes the channels and is just a > > subpart of uci_dev. That would reduce the number of dynamic > > allocations you manage and the extra kref. do you even need a separate > > structure for this? > > This goes back to one of my patch versions i tried to address concern > from Greg. Since we need to ref count the channel as well as the uci > device i decoupled the two objects and used two reference counts for two > different objects. What Greg complained about is the two kref in the same structure and that you were using kref as an open() counter. But splitting your struct in two in order to keep the two kref does not make the much code better (and simpler). I'm still a bit puzzled about the driver complexity, it's supposed to be just a passthrough interface to MHI after all. I would suggest several changes, that IMHO would simplify reviewing: - Use only one structure representing the 'uci' context (uci_dev) - Keep the read path simple (mhi_uci_read), do no use an intermediate cur_buf pointer, only dequeue the buffer when it is fully consumed. - As I commented before, take care of the dl_pending list access concurrency, even in wait_event. - You don't need to count the number of open() calls, AFAIK, mhi_prepare_for_transfer() simply fails if channels are already started... For testing purpose, I've implemented those changes on my side (based on your driver): https://git.linaro.org/landing-teams/working/telit/linux.git/commit/?h=mhi_uci_test&id=45ff60703cc26913061a26260e39cf3ab3e57c2b Feel free to pick (or not), I'm not going to 'block' that series if others are fine with the current implementation. Anyway, I've tested your series and it works on my side with libqmi/qmicli (controlling SDX55 modem): Tested-by: Loic Poulain <loic.poulain@linaro.org> Regards, Loic
On 12/1/2020 10:36 AM, Loic Poulain wrote: > On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: >> >> Hi Loic, >> >> On 11/30/20 10:22 AM, Loic Poulain wrote: >>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: >>>> >>>> This MHI client driver allows userspace clients to transfer >>>> raw data between MHI device and host using standard file operations. >>>> Driver instantiates UCI device object which is associated to device >>>> file node. UCI device object instantiates UCI channel object when device >>>> file node is opened. UCI channel object is used to manage MHI channels >>>> by calling MHI core APIs for read and write operations. MHI channels >>>> are started as part of device open(). MHI channels remain in start >>>> state until last release() is called on UCI device file node. Device >>>> file node is created with format >>> >>> [...] >>> >>>> +struct uci_chan { >>>> + struct uci_dev *udev; >>>> + wait_queue_head_t ul_wq; >>>> + >>>> + /* ul channel lock to synchronize multiple writes */ >>>> + struct mutex write_lock; >>>> + >>>> + wait_queue_head_t dl_wq; >>>> + >>>> + /* dl channel lock to synchronize multiple reads */ >>>> + struct mutex read_lock; >>>> + >>>> + /* >>>> + * protects pending list in bh context, channel release, read and >>>> + * poll >>>> + */ >>>> + spinlock_t dl_pending_lock; >>>> + >>>> + struct list_head dl_pending; >>>> + struct uci_buf *cur_buf; >>>> + size_t dl_size; >>>> + struct kref ref_count; >>>> +}; >>> >>> [...] >>> >>>> + * struct uci_dev - MHI UCI device >>>> + * @minor: UCI device node minor number >>>> + * @mhi_dev: associated mhi device object >>>> + * @uchan: UCI uplink and downlink channel object >>>> + * @mtu: max TRE buffer length >>>> + * @enabled: Flag to track the state of the UCI device >>>> + * @lock: mutex lock to manage uchan object >>>> + * @ref_count: uci_dev reference count >>>> + */ >>>> +struct uci_dev { >>>> + unsigned int minor; >>>> + struct mhi_device *mhi_dev; >>>> + struct uci_chan *uchan; >>> >>> Why a pointer to uci_chan and not just plainly integrating the >>> structure here, AFAIU uci_chan describes the channels and is just a >>> subpart of uci_dev. That would reduce the number of dynamic >>> allocations you manage and the extra kref. do you even need a separate >>> structure for this? >> >> This goes back to one of my patch versions i tried to address concern >> from Greg. Since we need to ref count the channel as well as the uci >> device i decoupled the two objects and used two reference counts for two >> different objects. > > What Greg complained about is the two kref in the same structure and > that you were using kref as an open() counter. But splitting your > struct in two in order to keep the two kref does not make the much > code better (and simpler). I'm still a bit puzzled about the driver > complexity, it's supposed to be just a passthrough interface to MHI > after all. > > I would suggest several changes, that IMHO would simplify reviewing: > - Use only one structure representing the 'uci' context (uci_dev) > - Keep the read path simple (mhi_uci_read), do no use an intermediate > cur_buf pointer, only dequeue the buffer when it is fully consumed. > - As I commented before, take care of the dl_pending list access > concurrency, even in wait_event. > - You don't need to count the number of open() calls, AFAIK, > mhi_prepare_for_transfer() simply fails if channels are already > started... Unless I missed something, you seem to have ignored the root issue that Hemant needs to solve, which is when to call mhi_unprepare_for_transfer(). You can't just call that when close() is called because there might be multiple users, and each one is going to trigger a close(), so you need to know how many close() instances to expect, and only call mhi_unprepare_for_transfer() for the last one. -- Jeffrey Hugo Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
On 12/1/2020 10:52 AM, Loic Poulain wrote: > On Tue, 1 Dec 2020 at 18:37, Jeffrey Hugo <jhugo@codeaurora.org> wrote: >> >> On 12/1/2020 10:36 AM, Loic Poulain wrote: >>> On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: >>>> >>>> Hi Loic, >>>> >>>> On 11/30/20 10:22 AM, Loic Poulain wrote: >>>>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: >>>>>> >>>>>> This MHI client driver allows userspace clients to transfer >>>>>> raw data between MHI device and host using standard file operations. >>>>>> Driver instantiates UCI device object which is associated to device >>>>>> file node. UCI device object instantiates UCI channel object when device >>>>>> file node is opened. UCI channel object is used to manage MHI channels >>>>>> by calling MHI core APIs for read and write operations. MHI channels >>>>>> are started as part of device open(). MHI channels remain in start >>>>>> state until last release() is called on UCI device file node. Device >>>>>> file node is created with format >>>>> >>>>> [...] >>>>> >>>>>> +struct uci_chan { >>>>>> + struct uci_dev *udev; >>>>>> + wait_queue_head_t ul_wq; >>>>>> + >>>>>> + /* ul channel lock to synchronize multiple writes */ >>>>>> + struct mutex write_lock; >>>>>> + >>>>>> + wait_queue_head_t dl_wq; >>>>>> + >>>>>> + /* dl channel lock to synchronize multiple reads */ >>>>>> + struct mutex read_lock; >>>>>> + >>>>>> + /* >>>>>> + * protects pending list in bh context, channel release, read and >>>>>> + * poll >>>>>> + */ >>>>>> + spinlock_t dl_pending_lock; >>>>>> + >>>>>> + struct list_head dl_pending; >>>>>> + struct uci_buf *cur_buf; >>>>>> + size_t dl_size; >>>>>> + struct kref ref_count; >>>>>> +}; >>>>> >>>>> [...] >>>>> >>>>>> + * struct uci_dev - MHI UCI device >>>>>> + * @minor: UCI device node minor number >>>>>> + * @mhi_dev: associated mhi device object >>>>>> + * @uchan: UCI uplink and downlink channel object >>>>>> + * @mtu: max TRE buffer length >>>>>> + * @enabled: Flag to track the state of the UCI device >>>>>> + * @lock: mutex lock to manage uchan object >>>>>> + * @ref_count: uci_dev reference count >>>>>> + */ >>>>>> +struct uci_dev { >>>>>> + unsigned int minor; >>>>>> + struct mhi_device *mhi_dev; >>>>>> + struct uci_chan *uchan; >>>>> >>>>> Why a pointer to uci_chan and not just plainly integrating the >>>>> structure here, AFAIU uci_chan describes the channels and is just a >>>>> subpart of uci_dev. That would reduce the number of dynamic >>>>> allocations you manage and the extra kref. do you even need a separate >>>>> structure for this? >>>> >>>> This goes back to one of my patch versions i tried to address concern >>>> from Greg. Since we need to ref count the channel as well as the uci >>>> device i decoupled the two objects and used two reference counts for two >>>> different objects. >>> >>> What Greg complained about is the two kref in the same structure and >>> that you were using kref as an open() counter. But splitting your >>> struct in two in order to keep the two kref does not make the much >>> code better (and simpler). I'm still a bit puzzled about the driver >>> complexity, it's supposed to be just a passthrough interface to MHI >>> after all. >>> >>> I would suggest several changes, that IMHO would simplify reviewing: >>> - Use only one structure representing the 'uci' context (uci_dev) >>> - Keep the read path simple (mhi_uci_read), do no use an intermediate >>> cur_buf pointer, only dequeue the buffer when it is fully consumed. >>> - As I commented before, take care of the dl_pending list access >>> concurrency, even in wait_event. >>> - You don't need to count the number of open() calls, AFAIK, >>> mhi_prepare_for_transfer() simply fails if channels are already >>> started... >> >> Unless I missed something, you seem to have ignored the root issue that >> Hemant needs to solve, which is when to call >> mhi_unprepare_for_transfer(). You can't just call that when close() is >> called because there might be multiple users, and each one is going to >> trigger a close(), so you need to know how many close() instances to >> expect, and only call mhi_unprepare_for_transfer() for the last one. > > That one part of his problem, yes, but if you unconditionally call > mhi_prepare_for_transfer in open(), it should fail for subsequent > users, and so only one user will successfully open the device. I'm pretty sure that falls under "trying to prevent users from opening a device" which Greg gave a pretty strong NACK to. So, that's not a solution. So, the complete problem is - N users need to be able to use the device (and by proxy, the channel) concurrently, but prepare needs to be called on the first user coming into the picture, and unprepare needs to be called on the last user exiting the picture. Hemant has supported this usecase in every rev of this series I've looked at, but apparently every solution he has proposed to handle this has caused confusion. -- Jeffrey Hugo Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
On Tue, 1 Dec 2020 at 18:37, Jeffrey Hugo <jhugo@codeaurora.org> wrote: > > On 12/1/2020 10:36 AM, Loic Poulain wrote: > > On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: > >> > >> Hi Loic, > >> > >> On 11/30/20 10:22 AM, Loic Poulain wrote: > >>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: > >>>> > >>>> This MHI client driver allows userspace clients to transfer > >>>> raw data between MHI device and host using standard file operations. > >>>> Driver instantiates UCI device object which is associated to device > >>>> file node. UCI device object instantiates UCI channel object when device > >>>> file node is opened. UCI channel object is used to manage MHI channels > >>>> by calling MHI core APIs for read and write operations. MHI channels > >>>> are started as part of device open(). MHI channels remain in start > >>>> state until last release() is called on UCI device file node. Device > >>>> file node is created with format > >>> > >>> [...] > >>> > >>>> +struct uci_chan { > >>>> + struct uci_dev *udev; > >>>> + wait_queue_head_t ul_wq; > >>>> + > >>>> + /* ul channel lock to synchronize multiple writes */ > >>>> + struct mutex write_lock; > >>>> + > >>>> + wait_queue_head_t dl_wq; > >>>> + > >>>> + /* dl channel lock to synchronize multiple reads */ > >>>> + struct mutex read_lock; > >>>> + > >>>> + /* > >>>> + * protects pending list in bh context, channel release, read and > >>>> + * poll > >>>> + */ > >>>> + spinlock_t dl_pending_lock; > >>>> + > >>>> + struct list_head dl_pending; > >>>> + struct uci_buf *cur_buf; > >>>> + size_t dl_size; > >>>> + struct kref ref_count; > >>>> +}; > >>> > >>> [...] > >>> > >>>> + * struct uci_dev - MHI UCI device > >>>> + * @minor: UCI device node minor number > >>>> + * @mhi_dev: associated mhi device object > >>>> + * @uchan: UCI uplink and downlink channel object > >>>> + * @mtu: max TRE buffer length > >>>> + * @enabled: Flag to track the state of the UCI device > >>>> + * @lock: mutex lock to manage uchan object > >>>> + * @ref_count: uci_dev reference count > >>>> + */ > >>>> +struct uci_dev { > >>>> + unsigned int minor; > >>>> + struct mhi_device *mhi_dev; > >>>> + struct uci_chan *uchan; > >>> > >>> Why a pointer to uci_chan and not just plainly integrating the > >>> structure here, AFAIU uci_chan describes the channels and is just a > >>> subpart of uci_dev. That would reduce the number of dynamic > >>> allocations you manage and the extra kref. do you even need a separate > >>> structure for this? > >> > >> This goes back to one of my patch versions i tried to address concern > >> from Greg. Since we need to ref count the channel as well as the uci > >> device i decoupled the two objects and used two reference counts for two > >> different objects. > > > > What Greg complained about is the two kref in the same structure and > > that you were using kref as an open() counter. But splitting your > > struct in two in order to keep the two kref does not make the much > > code better (and simpler). I'm still a bit puzzled about the driver > > complexity, it's supposed to be just a passthrough interface to MHI > > after all. > > > > I would suggest several changes, that IMHO would simplify reviewing: > > - Use only one structure representing the 'uci' context (uci_dev) > > - Keep the read path simple (mhi_uci_read), do no use an intermediate > > cur_buf pointer, only dequeue the buffer when it is fully consumed. > > - As I commented before, take care of the dl_pending list access > > concurrency, even in wait_event. > > - You don't need to count the number of open() calls, AFAIK, > > mhi_prepare_for_transfer() simply fails if channels are already > > started... > > Unless I missed something, you seem to have ignored the root issue that > Hemant needs to solve, which is when to call > mhi_unprepare_for_transfer(). You can't just call that when close() is > called because there might be multiple users, and each one is going to > trigger a close(), so you need to know how many close() instances to > expect, and only call mhi_unprepare_for_transfer() for the last one. That one part of his problem, yes, but if you unconditionally call mhi_prepare_for_transfer in open(), it should fail for subsequent users, and so only one user will successfully open the device. Regards, Loic
On 12/1/2020 11:05 AM, Loic Poulain wrote: > On Tue, 1 Dec 2020 at 18:51, Jeffrey Hugo <jhugo@codeaurora.org> wrote: >> >> On 12/1/2020 10:52 AM, Loic Poulain wrote: >>> On Tue, 1 Dec 2020 at 18:37, Jeffrey Hugo <jhugo@codeaurora.org> wrote: >>>> >>>> On 12/1/2020 10:36 AM, Loic Poulain wrote: >>>>> On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: >>>>>> >>>>>> Hi Loic, >>>>>> >>>>>> On 11/30/20 10:22 AM, Loic Poulain wrote: >>>>>>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: >>>>>>>> >>>>>>>> This MHI client driver allows userspace clients to transfer >>>>>>>> raw data between MHI device and host using standard file operations. >>>>>>>> Driver instantiates UCI device object which is associated to device >>>>>>>> file node. UCI device object instantiates UCI channel object when device >>>>>>>> file node is opened. UCI channel object is used to manage MHI channels >>>>>>>> by calling MHI core APIs for read and write operations. MHI channels >>>>>>>> are started as part of device open(). MHI channels remain in start >>>>>>>> state until last release() is called on UCI device file node. Device >>>>>>>> file node is created with format >>>>>>> >>>>>>> [...] >>>>>>> >>>>>>>> +struct uci_chan { >>>>>>>> + struct uci_dev *udev; >>>>>>>> + wait_queue_head_t ul_wq; >>>>>>>> + >>>>>>>> + /* ul channel lock to synchronize multiple writes */ >>>>>>>> + struct mutex write_lock; >>>>>>>> + >>>>>>>> + wait_queue_head_t dl_wq; >>>>>>>> + >>>>>>>> + /* dl channel lock to synchronize multiple reads */ >>>>>>>> + struct mutex read_lock; >>>>>>>> + >>>>>>>> + /* >>>>>>>> + * protects pending list in bh context, channel release, read and >>>>>>>> + * poll >>>>>>>> + */ >>>>>>>> + spinlock_t dl_pending_lock; >>>>>>>> + >>>>>>>> + struct list_head dl_pending; >>>>>>>> + struct uci_buf *cur_buf; >>>>>>>> + size_t dl_size; >>>>>>>> + struct kref ref_count; >>>>>>>> +}; >>>>>>> >>>>>>> [...] >>>>>>> >>>>>>>> + * struct uci_dev - MHI UCI device >>>>>>>> + * @minor: UCI device node minor number >>>>>>>> + * @mhi_dev: associated mhi device object >>>>>>>> + * @uchan: UCI uplink and downlink channel object >>>>>>>> + * @mtu: max TRE buffer length >>>>>>>> + * @enabled: Flag to track the state of the UCI device >>>>>>>> + * @lock: mutex lock to manage uchan object >>>>>>>> + * @ref_count: uci_dev reference count >>>>>>>> + */ >>>>>>>> +struct uci_dev { >>>>>>>> + unsigned int minor; >>>>>>>> + struct mhi_device *mhi_dev; >>>>>>>> + struct uci_chan *uchan; >>>>>>> >>>>>>> Why a pointer to uci_chan and not just plainly integrating the >>>>>>> structure here, AFAIU uci_chan describes the channels and is just a >>>>>>> subpart of uci_dev. That would reduce the number of dynamic >>>>>>> allocations you manage and the extra kref. do you even need a separate >>>>>>> structure for this? >>>>>> >>>>>> This goes back to one of my patch versions i tried to address concern >>>>>> from Greg. Since we need to ref count the channel as well as the uci >>>>>> device i decoupled the two objects and used two reference counts for two >>>>>> different objects. >>>>> >>>>> What Greg complained about is the two kref in the same structure and >>>>> that you were using kref as an open() counter. But splitting your >>>>> struct in two in order to keep the two kref does not make the much >>>>> code better (and simpler). I'm still a bit puzzled about the driver >>>>> complexity, it's supposed to be just a passthrough interface to MHI >>>>> after all. >>>>> >>>>> I would suggest several changes, that IMHO would simplify reviewing: >>>>> - Use only one structure representing the 'uci' context (uci_dev) >>>>> - Keep the read path simple (mhi_uci_read), do no use an intermediate >>>>> cur_buf pointer, only dequeue the buffer when it is fully consumed. >>>>> - As I commented before, take care of the dl_pending list access >>>>> concurrency, even in wait_event. >>>>> - You don't need to count the number of open() calls, AFAIK, >>>>> mhi_prepare_for_transfer() simply fails if channels are already >>>>> started... >>>> >>>> Unless I missed something, you seem to have ignored the root issue that >>>> Hemant needs to solve, which is when to call >>>> mhi_unprepare_for_transfer(). You can't just call that when close() is >>>> called because there might be multiple users, and each one is going to >>>> trigger a close(), so you need to know how many close() instances to >>>> expect, and only call mhi_unprepare_for_transfer() for the last one. >>> >>> That one part of his problem, yes, but if you unconditionally call >>> mhi_prepare_for_transfer in open(), it should fail for subsequent >>> users, and so only one user will successfully open the device. >> >> I'm pretty sure that falls under "trying to prevent users from opening a >> device" which Greg gave a pretty strong NACK to. So, that's not a solution. > > That would deserve clarification since other drivers like > virtio_console clearly prevent that (guest_connected). Quoting Greg from the source - https://lkml.org/lkml/2020/9/17/873 " I told you before, do not try to keep a device node from being opened multiple times, as it will always fail (think about passing file handles around between programs...) If userspace wants to do this, it will do it. If your driver can't handle that, that's fine, userspace will learn not to do that. But the kernel can not prevent this from happening. " > >> >> So, the complete problem is - >> >> N users need to be able to use the device (and by proxy, the channel) >> concurrently, but prepare needs to be called on the first user coming >> into the picture, and unprepare needs to be called on the last user >> exiting the picture. >> >> Hemant has supported this usecase in every rev of this series I've >> looked at, but apparently every solution he has proposed to handle this >> has caused confusion. > > Understood, but that can be done with a simple counter in that case. > > Regards, > Loic > -- Jeffrey Hugo Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
On Tue, 1 Dec 2020 at 18:51, Jeffrey Hugo <jhugo@codeaurora.org> wrote: > > On 12/1/2020 10:52 AM, Loic Poulain wrote: > > On Tue, 1 Dec 2020 at 18:37, Jeffrey Hugo <jhugo@codeaurora.org> wrote: > >> > >> On 12/1/2020 10:36 AM, Loic Poulain wrote: > >>> On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> wrote: > >>>> > >>>> Hi Loic, > >>>> > >>>> On 11/30/20 10:22 AM, Loic Poulain wrote: > >>>>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar <hemantk@codeaurora.org> wrote: > >>>>>> > >>>>>> This MHI client driver allows userspace clients to transfer > >>>>>> raw data between MHI device and host using standard file operations. > >>>>>> Driver instantiates UCI device object which is associated to device > >>>>>> file node. UCI device object instantiates UCI channel object when device > >>>>>> file node is opened. UCI channel object is used to manage MHI channels > >>>>>> by calling MHI core APIs for read and write operations. MHI channels > >>>>>> are started as part of device open(). MHI channels remain in start > >>>>>> state until last release() is called on UCI device file node. Device > >>>>>> file node is created with format > >>>>> > >>>>> [...] > >>>>> > >>>>>> +struct uci_chan { > >>>>>> + struct uci_dev *udev; > >>>>>> + wait_queue_head_t ul_wq; > >>>>>> + > >>>>>> + /* ul channel lock to synchronize multiple writes */ > >>>>>> + struct mutex write_lock; > >>>>>> + > >>>>>> + wait_queue_head_t dl_wq; > >>>>>> + > >>>>>> + /* dl channel lock to synchronize multiple reads */ > >>>>>> + struct mutex read_lock; > >>>>>> + > >>>>>> + /* > >>>>>> + * protects pending list in bh context, channel release, read and > >>>>>> + * poll > >>>>>> + */ > >>>>>> + spinlock_t dl_pending_lock; > >>>>>> + > >>>>>> + struct list_head dl_pending; > >>>>>> + struct uci_buf *cur_buf; > >>>>>> + size_t dl_size; > >>>>>> + struct kref ref_count; > >>>>>> +}; > >>>>> > >>>>> [...] > >>>>> > >>>>>> + * struct uci_dev - MHI UCI device > >>>>>> + * @minor: UCI device node minor number > >>>>>> + * @mhi_dev: associated mhi device object > >>>>>> + * @uchan: UCI uplink and downlink channel object > >>>>>> + * @mtu: max TRE buffer length > >>>>>> + * @enabled: Flag to track the state of the UCI device > >>>>>> + * @lock: mutex lock to manage uchan object > >>>>>> + * @ref_count: uci_dev reference count > >>>>>> + */ > >>>>>> +struct uci_dev { > >>>>>> + unsigned int minor; > >>>>>> + struct mhi_device *mhi_dev; > >>>>>> + struct uci_chan *uchan; > >>>>> > >>>>> Why a pointer to uci_chan and not just plainly integrating the > >>>>> structure here, AFAIU uci_chan describes the channels and is just a > >>>>> subpart of uci_dev. That would reduce the number of dynamic > >>>>> allocations you manage and the extra kref. do you even need a separate > >>>>> structure for this? > >>>> > >>>> This goes back to one of my patch versions i tried to address concern > >>>> from Greg. Since we need to ref count the channel as well as the uci > >>>> device i decoupled the two objects and used two reference counts for two > >>>> different objects. > >>> > >>> What Greg complained about is the two kref in the same structure and > >>> that you were using kref as an open() counter. But splitting your > >>> struct in two in order to keep the two kref does not make the much > >>> code better (and simpler). I'm still a bit puzzled about the driver > >>> complexity, it's supposed to be just a passthrough interface to MHI > >>> after all. > >>> > >>> I would suggest several changes, that IMHO would simplify reviewing: > >>> - Use only one structure representing the 'uci' context (uci_dev) > >>> - Keep the read path simple (mhi_uci_read), do no use an intermediate > >>> cur_buf pointer, only dequeue the buffer when it is fully consumed. > >>> - As I commented before, take care of the dl_pending list access > >>> concurrency, even in wait_event. > >>> - You don't need to count the number of open() calls, AFAIK, > >>> mhi_prepare_for_transfer() simply fails if channels are already > >>> started... > >> > >> Unless I missed something, you seem to have ignored the root issue that > >> Hemant needs to solve, which is when to call > >> mhi_unprepare_for_transfer(). You can't just call that when close() is > >> called because there might be multiple users, and each one is going to > >> trigger a close(), so you need to know how many close() instances to > >> expect, and only call mhi_unprepare_for_transfer() for the last one. > > > > That one part of his problem, yes, but if you unconditionally call > > mhi_prepare_for_transfer in open(), it should fail for subsequent > > users, and so only one user will successfully open the device. > > I'm pretty sure that falls under "trying to prevent users from opening a > device" which Greg gave a pretty strong NACK to. So, that's not a solution. That would deserve clarification since other drivers like virtio_console clearly prevent that (guest_connected). > > So, the complete problem is - > > N users need to be able to use the device (and by proxy, the channel) > concurrently, but prepare needs to be called on the first user coming > into the picture, and unprepare needs to be called on the last user > exiting the picture. > > Hemant has supported this usecase in every rev of this series I've > looked at, but apparently every solution he has proposed to handle this > has caused confusion. Understood, but that can be done with a simple counter in that case. Regards, Loic
Hi Loic, On 12/1/20 10:04 AM, Jeffrey Hugo wrote: > On 12/1/2020 11:05 AM, Loic Poulain wrote: >> On Tue, 1 Dec 2020 at 18:51, Jeffrey Hugo <jhugo@codeaurora.org> wrote: >>> >>> On 12/1/2020 10:52 AM, Loic Poulain wrote: >>>> On Tue, 1 Dec 2020 at 18:37, Jeffrey Hugo <jhugo@codeaurora.org> wrote: >>>>> >>>>> On 12/1/2020 10:36 AM, Loic Poulain wrote: >>>>>> On Tue, 1 Dec 2020 at 02:16, Hemant Kumar <hemantk@codeaurora.org> >>>>>> wrote: >>>>>>> >>>>>>> Hi Loic, >>>>>>> >>>>>>> On 11/30/20 10:22 AM, Loic Poulain wrote: >>>>>>>> On Sat, 28 Nov 2020 at 04:26, Hemant Kumar >>>>>>>> <hemantk@codeaurora.org> wrote: >>>>>>>>> >>>>>>>>> This MHI client driver allows userspace clients to transfer >>>>>>>>> raw data between MHI device and host using standard file >>>>>>>>> operations. >>>>>>>>> Driver instantiates UCI device object which is associated to >>>>>>>>> device >>>>>>>>> file node. UCI device object instantiates UCI channel object >>>>>>>>> when device >>>>>>>>> file node is opened. UCI channel object is used to manage MHI >>>>>>>>> channels >>>>>>>>> by calling MHI core APIs for read and write operations. MHI >>>>>>>>> channels >>>>>>>>> are started as part of device open(). MHI channels remain in start >>>>>>>>> state until last release() is called on UCI device file node. >>>>>>>>> Device >>>>>>>>> file node is created with format >>>>>>>> >>>>>>>> [...] >>>>>>>> >>>>>>>>> +struct uci_chan { >>>>>>>>> + struct uci_dev *udev; >>>>>>>>> + wait_queue_head_t ul_wq; >>>>>>>>> + >>>>>>>>> + /* ul channel lock to synchronize multiple writes */ >>>>>>>>> + struct mutex write_lock; >>>>>>>>> + >>>>>>>>> + wait_queue_head_t dl_wq; >>>>>>>>> + >>>>>>>>> + /* dl channel lock to synchronize multiple reads */ >>>>>>>>> + struct mutex read_lock; >>>>>>>>> + >>>>>>>>> + /* >>>>>>>>> + * protects pending list in bh context, channel >>>>>>>>> release, read and >>>>>>>>> + * poll >>>>>>>>> + */ >>>>>>>>> + spinlock_t dl_pending_lock; >>>>>>>>> + >>>>>>>>> + struct list_head dl_pending; >>>>>>>>> + struct uci_buf *cur_buf; >>>>>>>>> + size_t dl_size; >>>>>>>>> + struct kref ref_count; >>>>>>>>> +}; >>>>>>>> >>>>>>>> [...] >>>>>>>> >>>>>>>>> + * struct uci_dev - MHI UCI device >>>>>>>>> + * @minor: UCI device node minor number >>>>>>>>> + * @mhi_dev: associated mhi device object >>>>>>>>> + * @uchan: UCI uplink and downlink channel object >>>>>>>>> + * @mtu: max TRE buffer length >>>>>>>>> + * @enabled: Flag to track the state of the UCI device >>>>>>>>> + * @lock: mutex lock to manage uchan object >>>>>>>>> + * @ref_count: uci_dev reference count >>>>>>>>> + */ >>>>>>>>> +struct uci_dev { >>>>>>>>> + unsigned int minor; >>>>>>>>> + struct mhi_device *mhi_dev; >>>>>>>>> + struct uci_chan *uchan; >>>>>>>> >>>>>>>> Why a pointer to uci_chan and not just plainly integrating the >>>>>>>> structure here, AFAIU uci_chan describes the channels and is just a >>>>>>>> subpart of uci_dev. That would reduce the number of dynamic >>>>>>>> allocations you manage and the extra kref. do you even need a >>>>>>>> separate >>>>>>>> structure for this? >>>>>>> >>>>>>> This goes back to one of my patch versions i tried to address >>>>>>> concern >>>>>>> from Greg. Since we need to ref count the channel as well as the uci >>>>>>> device i decoupled the two objects and used two reference counts >>>>>>> for two >>>>>>> different objects. >>>>>> >>>>>> What Greg complained about is the two kref in the same structure and >>>>>> that you were using kref as an open() counter. But splitting your >>>>>> struct in two in order to keep the two kref does not make the much >>>>>> code better (and simpler). I'm still a bit puzzled about the driver >>>>>> complexity, it's supposed to be just a passthrough interface to MHI >>>>>> after all. >>>>>> >>>>>> I would suggest several changes, that IMHO would simplify reviewing: >>>>>> - Use only one structure representing the 'uci' context (uci_dev) >>>>>> - Keep the read path simple (mhi_uci_read), do no use an intermediate >>>>>> cur_buf pointer, only dequeue the buffer when it is fully consumed. >>>>>> - As I commented before, take care of the dl_pending list access >>>>>> concurrency, even in wait_event. >>>>>> - You don't need to count the number of open() calls, AFAIK, >>>>>> mhi_prepare_for_transfer() simply fails if channels are already >>>>>> started... >>>>> >>>>> Unless I missed something, you seem to have ignored the root issue >>>>> that >>>>> Hemant needs to solve, which is when to call >>>>> mhi_unprepare_for_transfer(). You can't just call that when >>>>> close() is >>>>> called because there might be multiple users, and each one is going to >>>>> trigger a close(), so you need to know how many close() instances to >>>>> expect, and only call mhi_unprepare_for_transfer() for the last one. >>>> >>>> That one part of his problem, yes, but if you unconditionally call >>>> mhi_prepare_for_transfer in open(), it should fail for subsequent >>>> users, and so only one user will successfully open the device. >>> >>> I'm pretty sure that falls under "trying to prevent users from opening a >>> device" which Greg gave a pretty strong NACK to. So, that's not a >>> solution. >> >> That would deserve clarification since other drivers like >> virtio_console clearly prevent that (guest_connected). > > Quoting Greg from the source - https://lkml.org/lkml/2020/9/17/873 > > " > I told you before, do not try to keep a device node from being opened > multiple times, as it will always fail (think about passing file handles > around between programs...) > > If userspace wants to do this, it will do it. If your driver can't > handle that, that's fine, userspace will learn not to do that. But the > kernel can not prevent this from happening. > " > >> >>> >>> So, the complete problem is - >>> >>> N users need to be able to use the device (and by proxy, the channel) >>> concurrently, but prepare needs to be called on the first user coming >>> into the picture, and unprepare needs to be called on the last user >>> exiting the picture. >>> >>> Hemant has supported this usecase in every rev of this series I've >>> looked at, but apparently every solution he has proposed to handle this >>> has caused confusion. >> >> Understood, but that can be done with a simple counter in that case. If you look at the old original patch set, it was using simple counter and Greg suggested to move away from that and use kref object, and then all incremental changes done using single kref object udev to two separate objects udev and uchan (introduced in v7). Based on every reviewer's comment i thought driver looked cleaner and moved away from complicated implementations when it was introduced initially. If every one still agrees to that we can move forward with its current form which includes valuable suggestions from all the reviewers. Thanks for testing my Change on your setup Loic. Mani wants me to update the Documentation patch by modifying the QMI usage example. I am going to upload next revision by updating the documentation. LOOPBACK test application and its inclusion to mhi device id table would be a separate patch series. Will share the LOOPBACK test application public git hub link in Documentation. Thanks Jeff for providing the background of the discussions from the past. Thanks, Hemant >> >> Regards, >> Loic >> > >
diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig index da5cd0c..5194e8e 100644 --- a/drivers/bus/mhi/Kconfig +++ b/drivers/bus/mhi/Kconfig @@ -29,3 +29,16 @@ config MHI_BUS_PCI_GENERIC This driver provides MHI PCI controller driver for devices such as Qualcomm SDX55 based PCIe modems. +config MHI_UCI + tristate "MHI UCI" + depends on MHI_BUS + help + MHI based Userspace Client Interface (UCI) driver is used for + transferring raw data between host and device using standard file + operations from userspace. Open, read, write, poll and close + operations are supported by this driver. Please check + mhi_uci_match_table for all supported channels that are exposed to + userspace. + + To compile this driver as a module, choose M here: the module will be + called mhi_uci. diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile index 0a2d778..69f2111 100644 --- a/drivers/bus/mhi/Makefile +++ b/drivers/bus/mhi/Makefile @@ -4,3 +4,6 @@ obj-y += core/ obj-$(CONFIG_MHI_BUS_PCI_GENERIC) += mhi_pci_generic.o mhi_pci_generic-y += pci_generic.o +# MHI client +mhi_uci-y := uci.o +obj-$(CONFIG_MHI_UCI) += mhi_uci.o diff --git a/drivers/bus/mhi/uci.c b/drivers/bus/mhi/uci.c new file mode 100644 index 0000000..fb9c183 --- /dev/null +++ b/drivers/bus/mhi/uci.c @@ -0,0 +1,665 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.*/ + +#include <linux/kernel.h> +#include <linux/mhi.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/poll.h> + +#define MHI_DEVICE_NAME "mhi" +#define MHI_UCI_DRIVER_NAME "mhi_uci" +#define MHI_MAX_UCI_MINORS 128 + +static DEFINE_IDR(uci_idr); +static DEFINE_MUTEX(uci_drv_mutex); +static struct class *uci_dev_class; +static int uci_dev_major; + +/** + * struct uci_chan - MHI channel for a UCI device + * @udev: associated UCI device object + * @ul_wq: wait queue for writer + * @write_lock: mutex write lock for ul channel + * @dl_wq: wait queue for reader + * @read_lock: mutex read lock for dl channel + * @dl_pending_lock: spin lock for dl_pending list + * @dl_pending: list of dl buffers userspace is waiting to read + * @cur_buf: current buffer userspace is reading + * @dl_size: size of the current dl buffer userspace is reading + * @ref_count: uci_chan reference count + */ +struct uci_chan { + struct uci_dev *udev; + wait_queue_head_t ul_wq; + + /* ul channel lock to synchronize multiple writes */ + struct mutex write_lock; + + wait_queue_head_t dl_wq; + + /* dl channel lock to synchronize multiple reads */ + struct mutex read_lock; + + /* + * protects pending list in bh context, channel release, read and + * poll + */ + spinlock_t dl_pending_lock; + + struct list_head dl_pending; + struct uci_buf *cur_buf; + size_t dl_size; + struct kref ref_count; +}; + +/** + * struct uci_buf - UCI buffer + * @data: data buffer + * @len: length of data buffer + * @node: list node of the UCI buffer + */ +struct uci_buf { + void *data; + size_t len; + struct list_head node; +}; + +/** + * struct uci_dev - MHI UCI device + * @minor: UCI device node minor number + * @mhi_dev: associated mhi device object + * @uchan: UCI uplink and downlink channel object + * @mtu: max TRE buffer length + * @enabled: Flag to track the state of the UCI device + * @lock: mutex lock to manage uchan object + * @ref_count: uci_dev reference count + */ +struct uci_dev { + unsigned int minor; + struct mhi_device *mhi_dev; + struct uci_chan *uchan; + size_t mtu; + bool enabled; + + /* synchronize open, release and driver remove */ + struct mutex lock; + struct kref ref_count; +}; + +static void mhi_uci_dev_chan_release(struct kref *ref) +{ + struct uci_buf *buf_itr, *tmp; + struct uci_chan *uchan = + container_of(ref, struct uci_chan, ref_count); + + if (uchan->udev->enabled) + mhi_unprepare_from_transfer(uchan->udev->mhi_dev); + + spin_lock_bh(&uchan->dl_pending_lock); + list_for_each_entry_safe(buf_itr, tmp, &uchan->dl_pending, node) { + list_del(&buf_itr->node); + kfree(buf_itr->data); + } + spin_unlock_bh(&uchan->dl_pending_lock); + + wake_up(&uchan->ul_wq); + wake_up(&uchan->dl_wq); + + mutex_lock(&uchan->read_lock); + if (uchan->cur_buf) + kfree(uchan->cur_buf->data); + + uchan->cur_buf = NULL; + mutex_unlock(&uchan->read_lock); + + mutex_destroy(&uchan->write_lock); + mutex_destroy(&uchan->read_lock); + + uchan->udev->uchan = NULL; + kfree(uchan); +} + +static int mhi_queue_inbound(struct uci_dev *udev) +{ + struct mhi_device *mhi_dev = udev->mhi_dev; + struct device *dev = &mhi_dev->dev; + int nr_desc, i, ret = -EIO; + size_t dl_buf_size; + void *buf; + struct uci_buf *ubuf; + + /* + * skip queuing without error if dl channel is not supported. This + * allows open to succeed for udev, supporting ul only channel. + */ + if (!udev->mhi_dev->dl_chan) + return 0; + + nr_desc = mhi_get_free_desc_count(mhi_dev, DMA_FROM_DEVICE); + + for (i = 0; i < nr_desc; i++) { + buf = kmalloc(udev->mtu, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + dl_buf_size = udev->mtu - sizeof(*ubuf); + + /* save uci_buf info at the end of buf */ + ubuf = buf + dl_buf_size; + ubuf->data = buf; + + dev_dbg(dev, "Allocated buf %d of %d size %zu\n", i, nr_desc, + dl_buf_size); + + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, buf, dl_buf_size, + MHI_EOT); + if (ret) { + kfree(buf); + dev_err(dev, "Failed to queue buffer %d\n", i); + return ret; + } + } + + return ret; +} + +static int mhi_uci_dev_start_chan(struct uci_dev *udev) +{ + int ret = 0; + struct uci_chan *uchan; + + mutex_lock(&udev->lock); + if (!udev->uchan || !kref_get_unless_zero(&udev->uchan->ref_count)) { + uchan = kzalloc(sizeof(*uchan), GFP_KERNEL); + if (!uchan) { + ret = -ENOMEM; + goto error_chan_start; + } + + udev->uchan = uchan; + uchan->udev = udev; + init_waitqueue_head(&uchan->ul_wq); + init_waitqueue_head(&uchan->dl_wq); + mutex_init(&uchan->write_lock); + mutex_init(&uchan->read_lock); + spin_lock_init(&uchan->dl_pending_lock); + INIT_LIST_HEAD(&uchan->dl_pending); + + ret = mhi_prepare_for_transfer(udev->mhi_dev); + if (ret) { + dev_err(&udev->mhi_dev->dev, "Error starting transfer channels\n"); + goto error_chan_cleanup; + } + + ret = mhi_queue_inbound(udev); + if (ret) + goto error_chan_cleanup; + + kref_init(&uchan->ref_count); + } + + mutex_unlock(&udev->lock); + + return 0; + +error_chan_cleanup: + mhi_uci_dev_chan_release(&uchan->ref_count); +error_chan_start: + mutex_unlock(&udev->lock); + return ret; +} + +static void mhi_uci_dev_release(struct kref *ref) +{ + struct uci_dev *udev = + container_of(ref, struct uci_dev, ref_count); + + mutex_destroy(&udev->lock); + + kfree(udev); +} + +static int mhi_uci_open(struct inode *inode, struct file *filp) +{ + unsigned int minor = iminor(inode); + struct uci_dev *udev = NULL; + int ret; + + mutex_lock(&uci_drv_mutex); + udev = idr_find(&uci_idr, minor); + if (!udev) { + pr_debug("uci dev: minor %d not found\n", minor); + mutex_unlock(&uci_drv_mutex); + return -ENODEV; + } + + kref_get(&udev->ref_count); + mutex_unlock(&uci_drv_mutex); + + ret = mhi_uci_dev_start_chan(udev); + if (ret) { + kref_put(&udev->ref_count, mhi_uci_dev_release); + return ret; + } + + filp->private_data = udev; + + return 0; +} + +static int mhi_uci_release(struct inode *inode, struct file *file) +{ + struct uci_dev *udev = file->private_data; + + mutex_lock(&udev->lock); + kref_put(&udev->uchan->ref_count, mhi_uci_dev_chan_release); + mutex_unlock(&udev->lock); + + kref_put(&udev->ref_count, mhi_uci_dev_release); + + return 0; +} + +static __poll_t mhi_uci_poll(struct file *file, poll_table *wait) +{ + struct uci_dev *udev = file->private_data; + struct mhi_device *mhi_dev = udev->mhi_dev; + struct device *dev = &mhi_dev->dev; + struct uci_chan *uchan = udev->uchan; + __poll_t mask = 0; + + poll_wait(file, &udev->uchan->ul_wq, wait); + poll_wait(file, &udev->uchan->dl_wq, wait); + + if (!udev->enabled) { + mask = EPOLLERR; + goto done; + } + + spin_lock_bh(&uchan->dl_pending_lock); + if (!list_empty(&uchan->dl_pending) || uchan->cur_buf) + mask |= EPOLLIN | EPOLLRDNORM; + spin_unlock_bh(&uchan->dl_pending_lock); + + if (mhi_get_free_desc_count(mhi_dev, DMA_TO_DEVICE) > 0) + mask |= EPOLLOUT | EPOLLWRNORM; + + dev_dbg(dev, "Client attempted to poll, returning mask 0x%x\n", mask); + +done: + return mask; +} + +static ssize_t mhi_uci_write(struct file *file, + const char __user *buf, + size_t count, + loff_t *offp) +{ + struct uci_dev *udev = file->private_data; + struct mhi_device *mhi_dev = udev->mhi_dev; + struct device *dev = &mhi_dev->dev; + struct uci_chan *uchan = udev->uchan; + size_t bytes_xfered = 0; + int ret, nr_desc = 0; + + /* if ul channel is not supported return error */ + if (!mhi_dev->ul_chan) + return -EOPNOTSUPP; + + if (!buf || !count) + return -EINVAL; + + dev_dbg(dev, "%s: to xfer: %zu bytes\n", __func__, count); + + if (mutex_lock_interruptible(&uchan->write_lock)) + return -EINTR; + + while (count) { + size_t xfer_size; + void *kbuf; + enum mhi_flags flags; + + /* wait for free descriptors */ + ret = wait_event_interruptible(uchan->ul_wq, + (!udev->enabled) || + (nr_desc = mhi_get_free_desc_count(mhi_dev, + DMA_TO_DEVICE)) > 0); + + if (ret == -ERESTARTSYS) { + dev_dbg(dev, "Interrupted by a signal in %s, exiting\n", + __func__); + goto err_mtx_unlock; + } + + if (!udev->enabled) { + ret = -ENODEV; + goto err_mtx_unlock; + } + + xfer_size = min_t(size_t, count, udev->mtu); + kbuf = kmalloc(xfer_size, GFP_KERNEL); + if (!kbuf) { + ret = -ENOMEM; + goto err_mtx_unlock; + } + + ret = copy_from_user(kbuf, buf, xfer_size); + if (ret) { + kfree(kbuf); + ret = -EFAULT; + goto err_mtx_unlock; + } + + /* if ring is full after this force EOT */ + if (nr_desc > 1 && (count - xfer_size)) + flags = MHI_CHAIN; + else + flags = MHI_EOT; + + ret = mhi_queue_buf(mhi_dev, DMA_TO_DEVICE, kbuf, xfer_size, + flags); + if (ret) { + kfree(kbuf); + goto err_mtx_unlock; + } + + bytes_xfered += xfer_size; + count -= xfer_size; + buf += xfer_size; + } + + mutex_unlock(&uchan->write_lock); + dev_dbg(dev, "%s: bytes xferred: %zu\n", __func__, bytes_xfered); + + return bytes_xfered; + +err_mtx_unlock: + mutex_unlock(&uchan->write_lock); + + return ret; +} + +static ssize_t mhi_uci_read(struct file *file, + char __user *buf, + size_t count, + loff_t *ppos) +{ + struct uci_dev *udev = file->private_data; + struct mhi_device *mhi_dev = udev->mhi_dev; + struct uci_chan *uchan = udev->uchan; + struct device *dev = &mhi_dev->dev; + struct uci_buf *ubuf; + size_t rx_buf_size; + char *ptr; + size_t to_copy; + int ret = 0; + + /* if dl channel is not supported return error */ + if (!mhi_dev->dl_chan) + return -EOPNOTSUPP; + + if (!buf) + return -EINVAL; + + if (mutex_lock_interruptible(&uchan->read_lock)) + return -EINTR; + + spin_lock_bh(&uchan->dl_pending_lock); + /* No data available to read, wait */ + if (!uchan->cur_buf && list_empty(&uchan->dl_pending)) { + dev_dbg(dev, "No data available to read, waiting\n"); + + spin_unlock_bh(&uchan->dl_pending_lock); + ret = wait_event_interruptible(uchan->dl_wq, + (!udev->enabled || + !list_empty(&uchan->dl_pending))); + + if (ret == -ERESTARTSYS) { + dev_dbg(dev, "Interrupted by a signal in %s, exiting\n", + __func__); + goto err_mtx_unlock; + } + + if (!udev->enabled) { + ret = -ENODEV; + goto err_mtx_unlock; + } + spin_lock_bh(&uchan->dl_pending_lock); + } + + /* new read, get the next descriptor from the list */ + if (!uchan->cur_buf) { + ubuf = list_first_entry_or_null(&uchan->dl_pending, + struct uci_buf, node); + if (!ubuf) { + ret = -EIO; + goto err_spin_unlock; + } + + list_del(&ubuf->node); + uchan->cur_buf = ubuf; + uchan->dl_size = ubuf->len; + dev_dbg(dev, "Got pkt of size: %zu\n", uchan->dl_size); + } + spin_unlock_bh(&uchan->dl_pending_lock); + + ubuf = uchan->cur_buf; + + /* Copy the buffer to user space */ + to_copy = min_t(size_t, count, uchan->dl_size); + ptr = ubuf->data + (ubuf->len - uchan->dl_size); + + ret = copy_to_user(buf, ptr, to_copy); + if (ret) { + ret = -EFAULT; + goto err_mtx_unlock; + } + + dev_dbg(dev, "Copied %zu of %zu bytes\n", to_copy, uchan->dl_size); + uchan->dl_size -= to_copy; + + /* we finished with this buffer, queue it back to hardware */ + if (!uchan->dl_size) { + uchan->cur_buf = NULL; + + rx_buf_size = udev->mtu - sizeof(*ubuf); + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, ubuf->data, + rx_buf_size, MHI_EOT); + if (ret) { + dev_err(dev, "Failed to recycle element: %d\n", ret); + kfree(ubuf->data); + goto err_mtx_unlock; + } + } + mutex_unlock(&uchan->read_lock); + + dev_dbg(dev, "%s: Returning %zu bytes\n", __func__, to_copy); + + return to_copy; + +err_spin_unlock: + spin_unlock_bh(&uchan->dl_pending_lock); +err_mtx_unlock: + mutex_unlock(&uchan->read_lock); + return ret; +} + +static const struct file_operations mhidev_fops = { + .owner = THIS_MODULE, + .open = mhi_uci_open, + .release = mhi_uci_release, + .read = mhi_uci_read, + .write = mhi_uci_write, + .poll = mhi_uci_poll, +}; + +static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev, + struct mhi_result *mhi_result) +{ + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); + struct uci_chan *uchan = udev->uchan; + struct device *dev = &mhi_dev->dev; + + dev_dbg(dev, "%s: status: %d xfer_len: %zu\n", __func__, + mhi_result->transaction_status, mhi_result->bytes_xferd); + + kfree(mhi_result->buf_addr); + + if (!mhi_result->transaction_status) + wake_up(&uchan->ul_wq); +} + +static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev, + struct mhi_result *mhi_result) +{ + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); + struct uci_chan *uchan = udev->uchan; + struct device *dev = &mhi_dev->dev; + struct uci_buf *ubuf; + size_t dl_buf_size = udev->mtu - sizeof(*ubuf); + + dev_dbg(dev, "%s: status: %d receive_len: %zu\n", __func__, + mhi_result->transaction_status, mhi_result->bytes_xferd); + + if (mhi_result->transaction_status && + mhi_result->transaction_status != -EOVERFLOW) { + kfree(mhi_result->buf_addr); + return; + } + + ubuf = mhi_result->buf_addr + dl_buf_size; + ubuf->data = mhi_result->buf_addr; + ubuf->len = mhi_result->bytes_xferd; + spin_lock_bh(&uchan->dl_pending_lock); + list_add_tail(&ubuf->node, &uchan->dl_pending); + spin_unlock_bh(&uchan->dl_pending_lock); + + wake_up(&uchan->dl_wq); +} + +static int mhi_uci_probe(struct mhi_device *mhi_dev, + const struct mhi_device_id *id) +{ + struct uci_dev *udev; + struct device *dev; + int index; + + udev = kzalloc(sizeof(*udev), GFP_KERNEL); + if (!udev) + return -ENOMEM; + + kref_init(&udev->ref_count); + mutex_init(&udev->lock); + udev->mhi_dev = mhi_dev; + + mutex_lock(&uci_drv_mutex); + index = idr_alloc(&uci_idr, udev, 0, MHI_MAX_UCI_MINORS, GFP_KERNEL); + mutex_unlock(&uci_drv_mutex); + if (index < 0) { + kfree(udev); + return index; + } + + udev->minor = index; + + udev->mtu = min_t(size_t, id->driver_data, MHI_MAX_MTU); + dev_set_drvdata(&mhi_dev->dev, udev); + udev->enabled = true; + + /* create device file node /dev/mhi_<mhi_dev_name> */ + dev = device_create(uci_dev_class, &mhi_dev->dev, + MKDEV(uci_dev_major, index), udev, + MHI_DEVICE_NAME "_%s", dev_name(&mhi_dev->dev)); + if (IS_ERR(dev)) { + mutex_lock(&uci_drv_mutex); + idr_remove(&uci_idr, udev->minor); + mutex_unlock(&uci_drv_mutex); + dev_set_drvdata(&mhi_dev->dev, NULL); + kfree(udev); + return PTR_ERR(dev); + } + + dev_dbg(&mhi_dev->dev, "probed uci dev: %s\n", id->chan); + + return 0; +}; + +static void mhi_uci_remove(struct mhi_device *mhi_dev) +{ + struct uci_dev *udev = dev_get_drvdata(&mhi_dev->dev); + + /* disable the node */ + mutex_lock(&udev->lock); + udev->enabled = false; + + /* delete the node to prevent new opens */ + device_destroy(uci_dev_class, MKDEV(uci_dev_major, udev->minor)); + + /* return error for any blocked read or write */ + if (udev->uchan) { + wake_up(&udev->uchan->ul_wq); + wake_up(&udev->uchan->dl_wq); + } + mutex_unlock(&udev->lock); + + mutex_lock(&uci_drv_mutex); + idr_remove(&uci_idr, udev->minor); + kref_put(&udev->ref_count, mhi_uci_dev_release); + mutex_unlock(&uci_drv_mutex); +} + +/* .driver_data stores max mtu */ +static const struct mhi_device_id mhi_uci_match_table[] = { + { .chan = "QMI", .driver_data = 0x1000}, + {}, +}; +MODULE_DEVICE_TABLE(mhi, mhi_uci_match_table); + +static struct mhi_driver mhi_uci_driver = { + .id_table = mhi_uci_match_table, + .remove = mhi_uci_remove, + .probe = mhi_uci_probe, + .ul_xfer_cb = mhi_ul_xfer_cb, + .dl_xfer_cb = mhi_dl_xfer_cb, + .driver = { + .name = MHI_UCI_DRIVER_NAME, + }, +}; + +static int __init mhi_uci_init(void) +{ + int ret; + + ret = register_chrdev(0, MHI_UCI_DRIVER_NAME, &mhidev_fops); + if (ret < 0) + return ret; + + uci_dev_major = ret; + uci_dev_class = class_create(THIS_MODULE, MHI_UCI_DRIVER_NAME); + if (IS_ERR(uci_dev_class)) { + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); + return PTR_ERR(uci_dev_class); + } + + ret = mhi_driver_register(&mhi_uci_driver); + if (ret) { + class_destroy(uci_dev_class); + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); + } + + return ret; +} + +static void __exit mhi_uci_exit(void) +{ + mhi_driver_unregister(&mhi_uci_driver); + class_destroy(uci_dev_class); + unregister_chrdev(uci_dev_major, MHI_UCI_DRIVER_NAME); + idr_destroy(&uci_idr); +} + +module_init(mhi_uci_init); +module_exit(mhi_uci_exit); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MHI UCI Driver");
This MHI client driver allows userspace clients to transfer raw data between MHI device and host using standard file operations. Driver instantiates UCI device object which is associated to device file node. UCI device object instantiates UCI channel object when device file node is opened. UCI channel object is used to manage MHI channels by calling MHI core APIs for read and write operations. MHI channels are started as part of device open(). MHI channels remain in start state until last release() is called on UCI device file node. Device file node is created with format /dev/mhi_<mhi_device_name> Currently it supports QMI channel. Signed-off-by: Hemant Kumar <hemantk@codeaurora.org> --- drivers/bus/mhi/Kconfig | 13 + drivers/bus/mhi/Makefile | 3 + drivers/bus/mhi/uci.c | 665 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 681 insertions(+) create mode 100644 drivers/bus/mhi/uci.c