diff mbox

[v4,03/10] ARM: STi: DT: Add sdhci pins for stih416

Message ID 1404918461-25390-4-git-send-email-peter.griffin@linaro.org
State New
Headers show

Commit Message

Peter Griffin July 9, 2014, 3:07 p.m. UTC 
This adds the required pin config for both SDHCI controllers on
the stih416 SoC.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
---
 arch/arm/boot/dts/stih416-pinctrl.dtsi | 39 ++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index ee6c119..01b5ad0 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -467,6 +467,45 @@ 
 					};
 				};
 			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0 {
+					st,pins {
+						mmcclk  = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+						data0   = <&PIO14 4 ALT4 BIDIR_PU BYPASS 0>;
+						data1   = <&PIO14 5 ALT4 BIDIR_PU BYPASS 0>;
+						data2   = <&PIO14 6 ALT4 BIDIR_PU BYPASS 0>;
+						data3   = <&PIO14 7 ALT4 BIDIR_PU BYPASS 0>;
+						cmd     = <&PIO15 1 ALT4 BIDIR_PU BYPASS 0>;
+						wp      = <&PIO15 3 ALT4 IN>;
+						data4   = <&PIO16 4 ALT4 BIDIR_PU BYPASS 0>;
+						data5   = <&PIO16 5 ALT4 BIDIR_PU BYPASS 0>;
+						data6   = <&PIO16 6 ALT4 BIDIR_PU BYPASS 0>;
+						data7   = <&PIO16 7 ALT4 BIDIR_PU BYPASS 0>;
+						pwr     = <&PIO17 1 ALT4 OUT>;
+						cd      = <&PIO17 2 ALT4 IN>;
+						led     = <&PIO17 3 ALT4 OUT>;
+					};
+				};
+			};
+			mmc1 {
+				pinctrl_mmc1: mmc1 {
+					st,pins {
+						mmcclk  = <&PIO15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+						data0   = <&PIO13 7 ALT3 BIDIR_PU BYPASS 0>;
+						data1   = <&PIO14 1 ALT3 BIDIR_PU BYPASS 0>;
+						data2   = <&PIO14 2 ALT3 BIDIR_PU BYPASS 0>;
+						data3   = <&PIO14 3 ALT3 BIDIR_PU BYPASS 0>;
+						cmd     = <&PIO15 4 ALT3 BIDIR_PU BYPASS 0>;
+						data4   = <&PIO15 6 ALT3 BIDIR_PU BYPASS 0>;
+						data5   = <&PIO15 7 ALT3 BIDIR_PU BYPASS 0>;
+						data6   = <&PIO16 0 ALT3 BIDIR_PU BYPASS 0>;
+						data7   = <&PIO16 1 ALT3 BIDIR_PU BYPASS 0>;
+						pwr     = <&PIO16 2 ALT3 OUT>;
+						nreset  = <&PIO13 6 ALT3 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-fvdp-fe {