diff mbox series

[v1] drm/bridge: lt9611: Fix handling of 4k panels

Message ID 20201123104616.1412688-1-robert.foss@linaro.org
State Superseded
Headers show
Series [v1] drm/bridge: lt9611: Fix handling of 4k panels | expand

Commit Message

Robert Foss Nov. 23, 2020, 10:46 a.m. UTC
4k requires two dsi pipes, so don't report MODE_OK when only a
single pipe is configured. But rather report MODE_PANEL to
signal that requirements of the panel are not being met.

Reported-by: Peter Collingbourne <pcc@google.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>

Tested-by: John Stultz <john.stultz@linaro.org>

---
 drivers/gpu/drm/bridge/lontium-lt9611.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Comments

Peter Collingbourne Dec. 10, 2020, 9 p.m. UTC | #1
Thanks. Confirmed that this fixes display output for me on a 4K monitor.

On Mon, Nov 23, 2020 at 2:46 AM Robert Foss <robert.foss@linaro.org> wrote:
>

> 4k requires two dsi pipes, so don't report MODE_OK when only a

> single pipe is configured. But rather report MODE_PANEL to

> signal that requirements of the panel are not being met.

>

> Reported-by: Peter Collingbourne <pcc@google.com>

> Suggested-by: Peter Collingbourne <pcc@google.com>

> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> Tested-by: John Stultz <john.stultz@linaro.org>


Tested-by: Peter Collingbourne <pcc@google.com>


> ---

>  drivers/gpu/drm/bridge/lontium-lt9611.c | 8 +++++++-

>  1 file changed, 7 insertions(+), 1 deletion(-)

>

> diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c

> index d734d9402c35..e8eb8deb444b 100644

> --- a/drivers/gpu/drm/bridge/lontium-lt9611.c

> +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c

> @@ -867,8 +867,14 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,

>                                                      const struct drm_display_mode *mode)

>  {

>         struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);

> +       struct lt9611 *lt9611 = bridge_to_lt9611(bridge);

>

> -       return lt9611_mode ? MODE_OK : MODE_BAD;

> +       if (!lt9611_mode)

> +               return MODE_BAD;

> +       else if (lt9611_mode->intfs > 1 && !lt9611->dsi1)

> +               return MODE_PANEL;

> +       else

> +               return MODE_OK;

>  }

>

>  static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)

> --

> 2.27.0

>

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Bjorn Andersson Dec. 11, 2020, 12:25 a.m. UTC | #2
On Mon 23 Nov 04:46 CST 2020, Robert Foss wrote:

> 4k requires two dsi pipes, so don't report MODE_OK when only a

> single pipe is configured. But rather report MODE_PANEL to

> signal that requirements of the panel are not being met.

> 

> Reported-by: Peter Collingbourne <pcc@google.com>

> Suggested-by: Peter Collingbourne <pcc@google.com>

> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> Tested-by: John Stultz <john.stultz@linaro.org>


This looks very similar to what I had in the early revisions of the
driver.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Regards,
Bjorn

> ---

>  drivers/gpu/drm/bridge/lontium-lt9611.c | 8 +++++++-

>  1 file changed, 7 insertions(+), 1 deletion(-)

> 

> diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c

> index d734d9402c35..e8eb8deb444b 100644

> --- a/drivers/gpu/drm/bridge/lontium-lt9611.c

> +++ b/drivers/gpu/drm/bridge/lontium-lt9611.c

> @@ -867,8 +867,14 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,

>  						     const struct drm_display_mode *mode)

>  {

>  	struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);

> +	struct lt9611 *lt9611 = bridge_to_lt9611(bridge);

>  

> -	return lt9611_mode ? MODE_OK : MODE_BAD;

> +	if (!lt9611_mode)

> +		return MODE_BAD;

> +	else if (lt9611_mode->intfs > 1 && !lt9611->dsi1)

> +		return MODE_PANEL;

> +	else

> +		return MODE_OK;

>  }

>  

>  static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)

> -- 

> 2.27.0

> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index d734d9402c35..e8eb8deb444b 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -867,8 +867,14 @@  static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,
 						     const struct drm_display_mode *mode)
 {
 	struct lt9611_mode *lt9611_mode = lt9611_find_mode(mode);
+	struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
 
-	return lt9611_mode ? MODE_OK : MODE_BAD;
+	if (!lt9611_mode)
+		return MODE_BAD;
+	else if (lt9611_mode->intfs > 1 && !lt9611->dsi1)
+		return MODE_PANEL;
+	else
+		return MODE_OK;
 }
 
 static void lt9611_bridge_pre_enable(struct drm_bridge *bridge)