@@ -410,6 +410,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
+ /* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
+ { USB_DEVICE(0x17ef, 0xa012), .driver_info =
+ USB_QUIRK_DISCONNECT_SUSPEND },
+
/* BUILDWIN Photo Frame */
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
@@ -430,6 +434,7 @@ static const struct usb_device_id usb_quirk_list[] = {
USB_QUIRK_DELAY_CTRL_MSG },
/* Corsair Strafe RGB */
+
{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT |
USB_QUIRK_DELAY_CTRL_MSG },
Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in usb-audio. when A630Z going into S3,the system immediately wakeup 7-8 seconds later by usb-audio disconnect interrupt to avoids the issue. Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. Changes since v2 - Add Changes commit format Changes since v1 - Change subject form "ALSA" to "USB:" - Adjust to approoriate line Signed-off-by: penghao <penghao@uniontech.com> --- drivers/usb/core/quirks.c | 5 +++++ 1 file changed, 5 insertions(+)