| Message ID | 20201117201555.26723-3-dmurphy@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | DP83TD510 Single Pair 10Mbps Ethernet PHY | expand |
On Tue, Nov 17, 2020 at 02:15:53PM -0600, Dan Murphy wrote: > Per the 802.3cg spec the 10base T1L can operate at 2 different > differential voltages 1v p2p and 2.4v p2p. The abiility of the PHY to 1.1V? > drive that output is dependent on the PHY's on board power supply. > This common feature is applicable to all 10base T1L PHYs so this binding > property belongs in a top level ethernet document. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > index 6dd72faebd89..bda1ce51836b 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > @@ -174,6 +174,12 @@ properties: > PHY's that have configurable TX internal delays. If this property is > present then the PHY applies the TX delay. > > + max-tx-rx-p2p-microvolt: > + description: | Don't need '|' if no formatting. > + Configures the Tx/Rx p2p differential output voltage for 10base-T1L PHYs. > + enum: [ 1100, 2400 ] > + default: 2400 Aren't you off by 1000? > + > required: > - reg > > -- > 2.29.2 >
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 6dd72faebd89..bda1ce51836b 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -174,6 +174,12 @@ properties: PHY's that have configurable TX internal delays. If this property is present then the PHY applies the TX delay. + max-tx-rx-p2p-microvolt: + description: | + Configures the Tx/Rx p2p differential output voltage for 10base-T1L PHYs. + enum: [ 1100, 2400 ] + default: 2400 + required: - reg
Per the 802.3cg spec the 10base T1L can operate at 2 different differential voltages 1v p2p and 2.4v p2p. The abiility of the PHY to drive that output is dependent on the PHY's on board power supply. This common feature is applicable to all 10base T1L PHYs so this binding property belongs in a top level ethernet document. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 ++++++ 1 file changed, 6 insertions(+)