@@ -853,6 +853,40 @@ u2phy_host: host-port {
};
};
+ usb3phy: usb3-phy@ff470000 {
+ compatible = "rockchip,rk3328-usb3phy";
+ reg = <0x0 0xff460000 0x0 0x10000>;
+ clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
+ clock-names = "usb3phy-otg", "usb3phy-pipe";
+ resets = <&cru SRST_USB3PHY_U2>,
+ <&cru SRST_USB3PHY_U3>,
+ <&cru SRST_USB3PHY_PIPE>,
+ <&cru SRST_USB3OTG_UTMI>,
+ <&cru SRST_USB3PHY_OTG_P>,
+ <&cru SRST_USB3PHY_PIPE_P>;
+ reset-names = "usb3phy-u2-por", "usb3phy-u3-por",
+ "usb3phy-pipe-mac", "usb3phy-utmi-mac",
+ "usb3phy-utmi-apb", "usb3phy-pipe-apb";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb3phy_utmi: utmi@ff470000 {
+ compatible = "rockchip,rk3328-usb3phy-utmi";
+ reg = <0x0 0xff470000 0x0 0x8000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb3phy_pipe: pipe@ff478000 {
+ compatible = "rockchip,rk3328-usb3phy-pipe";
+ reg = <0x0 0xff478000 0x0 0x8000>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
sdmmc: mmc@ff500000 {
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff500000 0x0 0x4000>;
@@ -983,6 +1017,37 @@ usb_host0_ohci: usb@ff5d0000 {
status = "disabled";
};
+ usbdrd3: usb@ff600000 {
+ compatible = "rockchip,rk3328-dwc3";
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
+ <&cru SCLK_USB3OTG_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3: dwc3@ff600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
+ <&cru SCLK_USB3OTG_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
+ dr_mode = "host";
+ usb-phy = <&usb3phy_utmi>, <&usb3phy_pipe>;
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ snps,xhci-trb-ent-quirk;
+ status = "disabled";
+ };
+ };
+
gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
Add the usb3 controller and usb3 phy nodes to the rk3328. Signed-off-by: Peter Geis <pgwipeout@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 65 ++++++++++++++++++++++++ 1 file changed, 65 insertions(+)