| Message ID | 1403705421-17597-5-git-send-email-lorenzo.pieralisi@arm.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Jun 25, 2014 at 03:10:17PM +0100, Lorenzo Pieralisi wrote: > This patch implements the cpu_suspend cpu operations method through > the PSCI CPU_SUSPEND API. The PSCI implementation translates the idle state > index passed by the cpu_suspend core call into a valid PSCI state according to > the PSCI states initialized at boot by the PSCI suspend backend. > > Entry point is set to cpu_resume physical address, that represents the > default kernel execution address following a CPU reset. > > Idle state indices missing a DT node description are initialized to power > state standby WFI so that if called by the idle driver they provide the > default behaviour. > > Reviewed-by: Sebastian Capella <sebcape@gmail.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > --- > arch/arm64/include/asm/psci.h | 4 ++ > arch/arm64/kernel/psci.c | 103 ++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 107 insertions(+) [...] > +static void psci_power_state_unpack(u32 power_state, > + struct psci_power_state *state) > +{ > + state->id = (power_state & PSCI_0_2_POWER_STATE_ID_MASK) >> > + PSCI_0_2_POWER_STATE_ID_SHIFT; > + state->type = (power_state & PSCI_0_2_POWER_STATE_TYPE_MASK) >> > + PSCI_0_2_POWER_STATE_TYPE_SHIFT; > + state->affinity_level = > + (power_state & PSCI_0_2_POWER_STATE_AFFL_MASK) >> > + PSCI_0_2_POWER_STATE_AFFL_SHIFT; > +} Is this valid for PSCI versions prior to 0.2? > /* > * The following two functions are invoked via the invoke_psci_fn pointer > * and will not be inlined, allowing us to piggyback on the AAPCS. > @@ -199,6 +216,77 @@ static int psci_migrate_info_type(void) > return err; > } > > +int __init psci_dt_register_idle_states(struct cpuidle_driver *drv, > + struct device_node *state_nodes[]) > +{ > + int cpu, i; Perhaps unsigned int? You print i with %u below. > + for (i = 0; i < drv->state_count; i++) { > + u32 psci_power_state; > + > + if (!state_nodes[i]) { > + /* > + * An index with a missing node pointer falls back to > + * simple STANDBYWFI > + */ > + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; > + continue; > + } Does this make sense? Are there any limitations on which state nodes could be missing? > + > + if (of_property_read_u32(state_nodes[i], "entry-method-param", > + &psci_power_state)) { > + pr_warn(" * %s missing entry-method-param property\n", > + state_nodes[i]->full_name); > + /* > + * If entry-method-param property is missing, fall > + * back to STANDBYWFI state > + */ > + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; > + continue; Surely we want to throw away these states instead? Otherwise we can get into a mess like: psci_states[0] => low power state psci_states[1] => lower power state psci_states[2] => WFI / not low power psci_states[3] => lowest power state Where power usage and latency would jump around rather than follow monotonic patterns. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Lorenzo, On Wed, 2014-06-25 at 15:10 +0100, Lorenzo Pieralisi wrote: > diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c > + /* > + * This is belt-and-braces: make sure that if the idle > + * specified protocol is psci, the cpu_ops have been > + * initialized to psci operations. Anything else is > + * a recipe for mayhem. > + */ > + for_each_cpu(cpu, drv->cpumask) { > + cpu_ops_ptr = cpu_ops[cpu]; > + if (WARN_ON(!cpu_ops_ptr || strcmp(cpu_ops_ptr->name, "psci"))) > + return -EOPNOTSUPP; > + } I'm not sure how drv->cpumask is setup, but if a system has mixed enable methods, say some cpus 'spin-table' and some 'psci', will this give a false error? If drv->cpumask should only include 'psci' cpus, then should this be a BUG()? > + > + psci_states = kcalloc(drv->state_count, sizeof(*psci_states), > + GFP_KERNEL); > + > + if (!psci_states) { > + pr_warn("psci idle state allocation failed\n"); > + return -ENOMEM; > + } > + > + for_each_cpu(cpu, drv->cpumask) { > + if (per_cpu(psci_power_state, cpu)) { > + pr_warn("idle states already initialized on cpu %u\n", > + cpu); This seems like an implementation problem, if so, shouldn't this be pr_debug()? > #endif > > +#ifdef CONFIG_ARM64_CPU_SUSPEND > +static int cpu_psci_cpu_suspend(unsigned long index) > +{ > + struct psci_power_state *state = __get_cpu_var(psci_power_state); > + > + if (!state) > + return -EOPNOTSUPP; > + > + return psci_ops.cpu_suspend(state[index], virt_to_phys(cpu_resume)); > +} > +#endif Why not put a __maybe_unused attribute on cpu_psci_cpu_suspend() and remove the preprocessor conditional. That way this code will always be compiled, and with therefor always get a build test. The linker should strip out the unused code when CONFIG_ARM64_CPU_SUSPEND=n and the code below is not compiled. > +#ifdef CONFIG_ARM64_CPU_SUSPEND > + .cpu_suspend = cpu_psci_cpu_suspend, > +#endif > }; -Geoff -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 25, 2014 at 05:09:11PM +0100, Mark Rutland wrote: > On Wed, Jun 25, 2014 at 03:10:17PM +0100, Lorenzo Pieralisi wrote: > > This patch implements the cpu_suspend cpu operations method through > > the PSCI CPU_SUSPEND API. The PSCI implementation translates the idle state > > index passed by the cpu_suspend core call into a valid PSCI state according to > > the PSCI states initialized at boot by the PSCI suspend backend. > > > > Entry point is set to cpu_resume physical address, that represents the > > default kernel execution address following a CPU reset. > > > > Idle state indices missing a DT node description are initialized to power > > state standby WFI so that if called by the idle driver they provide the > > default behaviour. > > > > Reviewed-by: Sebastian Capella <sebcape@gmail.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > --- > > arch/arm64/include/asm/psci.h | 4 ++ > > arch/arm64/kernel/psci.c | 103 ++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 107 insertions(+) > > [...] > > > +static void psci_power_state_unpack(u32 power_state, > > + struct psci_power_state *state) > > +{ > > + state->id = (power_state & PSCI_0_2_POWER_STATE_ID_MASK) >> > > + PSCI_0_2_POWER_STATE_ID_SHIFT; > > + state->type = (power_state & PSCI_0_2_POWER_STATE_TYPE_MASK) >> > > + PSCI_0_2_POWER_STATE_TYPE_SHIFT; > > + state->affinity_level = > > + (power_state & PSCI_0_2_POWER_STATE_AFFL_MASK) >> > > + PSCI_0_2_POWER_STATE_AFFL_SHIFT; > > +} > > Is this valid for PSCI versions prior to 0.2? Yes, it should, as for the packing function. > > /* > > * The following two functions are invoked via the invoke_psci_fn pointer > > * and will not be inlined, allowing us to piggyback on the AAPCS. > > @@ -199,6 +216,77 @@ static int psci_migrate_info_type(void) > > return err; > > } > > > > +int __init psci_dt_register_idle_states(struct cpuidle_driver *drv, > > + struct device_node *state_nodes[]) > > +{ > > + int cpu, i; > > Perhaps unsigned int? You print i with %u below. Yes. > > + for (i = 0; i < drv->state_count; i++) { > > + u32 psci_power_state; > > + > > + if (!state_nodes[i]) { > > + /* > > + * An index with a missing node pointer falls back to > > + * simple STANDBYWFI > > + */ > > + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; > > + continue; > > + } > > Does this make sense? Are there any limitations on which state nodes > could be missing? I think the check is overkill, you are right. > > + > > + if (of_property_read_u32(state_nodes[i], "entry-method-param", > > + &psci_power_state)) { > > + pr_warn(" * %s missing entry-method-param property\n", > > + state_nodes[i]->full_name); > > + /* > > + * If entry-method-param property is missing, fall > > + * back to STANDBYWFI state > > + */ > > + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; > > + continue; > > Surely we want to throw away these states instead? > > Otherwise we can get into a mess like: > > psci_states[0] => low power state > psci_states[1] => lower power state > psci_states[2] => WFI / not low power > psci_states[3] => lowest power state > > Where power usage and latency would jump around rather than follow > monotonic patterns. I do not think that's a problem by itself, but honestly I think you have a point. It is better to barf, throw away the states and avoid initializing CPUidle to force a firmware update than keep going with a state that is actually not doing what it probably was designed for, I just tried to be too accommodating on this. Thanks, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Geoff, On Wed, Jun 25, 2014 at 09:52:00PM +0100, Geoff Levand wrote: > Hi Lorenzo, > > On Wed, 2014-06-25 at 15:10 +0100, Lorenzo Pieralisi wrote: > > diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c > > > + /* > > + * This is belt-and-braces: make sure that if the idle > > + * specified protocol is psci, the cpu_ops have been > > + * initialized to psci operations. Anything else is > > + * a recipe for mayhem. > > + */ > > + for_each_cpu(cpu, drv->cpumask) { > > + cpu_ops_ptr = cpu_ops[cpu]; > > + if (WARN_ON(!cpu_ops_ptr || strcmp(cpu_ops_ptr->name, "psci"))) > > + return -EOPNOTSUPP; > > + } > > I'm not sure how drv->cpumask is setup, but if a system has mixed enable > methods, say some cpus 'spin-table' and some 'psci', will this give a > false error? I do not think that's a false error. If the idle states specify an entry-method == psci, and cpu_ops for some cpus are not set to PSCI, obviously because the enable-method specified that, that's a firmware bug. > If drv->cpumask should only include 'psci' cpus, then should this be a > BUG()? Ok, if we got here, it is because the idle-states entry-method was set to PSCI. Now, if any of the CPUs in the driver mask has a cpu_ops pointer != PSCI, we have a problem and we should warn on that. I do not think that justifies a BUG_ON, but that's one of those things, it is debatable. Question is whether the check should also be carried out at cpu_ops initialization (ie to check for mixed cpu_ops), for certain if the idle states entry-method is PSCI and cpu_ops != PSCI we should WARN/BUG on that. Or embed this idle state parameters initialization at cpu_ops init (see other thread you started) so that we can kill two birds with one stone. > > + > > + psci_states = kcalloc(drv->state_count, sizeof(*psci_states), > > + GFP_KERNEL); > > + > > + if (!psci_states) { > > + pr_warn("psci idle state allocation failed\n"); > > + return -ENOMEM; > > + } > > + > > + for_each_cpu(cpu, drv->cpumask) { > > + if (per_cpu(psci_power_state, cpu)) { > > + pr_warn("idle states already initialized on cpu %u\n", > > + cpu); > > This seems like an implementation problem, if so, shouldn't this be > pr_debug()? Maybe, I will give it some thought. > > #endif > > > > +#ifdef CONFIG_ARM64_CPU_SUSPEND > > +static int cpu_psci_cpu_suspend(unsigned long index) > > +{ > > + struct psci_power_state *state = __get_cpu_var(psci_power_state); > > + > > + if (!state) > > + return -EOPNOTSUPP; > > + > > + return psci_ops.cpu_suspend(state[index], virt_to_phys(cpu_resume)); > > +} > > +#endif > > Why not put a __maybe_unused attribute on cpu_psci_cpu_suspend() and > remove the preprocessor conditional. That way this code will always be > compiled, and with therefor always get a build test. The linker should > strip out the unused code when CONFIG_ARM64_CPU_SUSPEND=n and the code > below is not compiled. It can make sense, yes. Thanks, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h index e5312ea..16c1351 100644 --- a/arch/arm64/include/asm/psci.h +++ b/arch/arm64/include/asm/psci.h @@ -14,6 +14,10 @@ #ifndef __ASM_PSCI_H #define __ASM_PSCI_H +struct cpuidle_driver; int psci_init(void); +int __init psci_dt_register_idle_states(struct cpuidle_driver *, + struct device_node *[]); + #endif /* __ASM_PSCI_H */ diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 9e9798f..f708bcc 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -15,12 +15,14 @@ #define pr_fmt(fmt) "psci: " fmt +#include <linux/cpuidle.h> #include <linux/init.h> #include <linux/of.h> #include <linux/smp.h> #include <linux/reboot.h> #include <linux/pm.h> #include <linux/delay.h> +#include <linux/slab.h> #include <uapi/linux/psci.h> #include <asm/compiler.h> @@ -28,6 +30,7 @@ #include <asm/errno.h> #include <asm/psci.h> #include <asm/smp_plat.h> +#include <asm/suspend.h> #include <asm/system_misc.h> #define PSCI_POWER_STATE_TYPE_STANDBY 0 @@ -65,6 +68,8 @@ enum psci_function { PSCI_FN_MAX, }; +static DEFINE_PER_CPU_READ_MOSTLY(struct psci_power_state *, psci_power_state); + static u32 psci_function_id[PSCI_FN_MAX]; static int psci_to_linux_errno(int errno) @@ -93,6 +98,18 @@ static u32 psci_power_state_pack(struct psci_power_state state) & PSCI_0_2_POWER_STATE_AFFL_MASK); } +static void psci_power_state_unpack(u32 power_state, + struct psci_power_state *state) +{ + state->id = (power_state & PSCI_0_2_POWER_STATE_ID_MASK) >> + PSCI_0_2_POWER_STATE_ID_SHIFT; + state->type = (power_state & PSCI_0_2_POWER_STATE_TYPE_MASK) >> + PSCI_0_2_POWER_STATE_TYPE_SHIFT; + state->affinity_level = + (power_state & PSCI_0_2_POWER_STATE_AFFL_MASK) >> + PSCI_0_2_POWER_STATE_AFFL_SHIFT; +} + /* * The following two functions are invoked via the invoke_psci_fn pointer * and will not be inlined, allowing us to piggyback on the AAPCS. @@ -199,6 +216,77 @@ static int psci_migrate_info_type(void) return err; } +int __init psci_dt_register_idle_states(struct cpuidle_driver *drv, + struct device_node *state_nodes[]) +{ + int cpu, i; + struct psci_power_state *psci_states; + const struct cpu_operations *cpu_ops_ptr; + + if (!state_nodes) + return -EINVAL; + /* + * This is belt-and-braces: make sure that if the idle + * specified protocol is psci, the cpu_ops have been + * initialized to psci operations. Anything else is + * a recipe for mayhem. + */ + for_each_cpu(cpu, drv->cpumask) { + cpu_ops_ptr = cpu_ops[cpu]; + if (WARN_ON(!cpu_ops_ptr || strcmp(cpu_ops_ptr->name, "psci"))) + return -EOPNOTSUPP; + } + + psci_states = kcalloc(drv->state_count, sizeof(*psci_states), + GFP_KERNEL); + + if (!psci_states) { + pr_warn("psci idle state allocation failed\n"); + return -ENOMEM; + } + + for_each_cpu(cpu, drv->cpumask) { + if (per_cpu(psci_power_state, cpu)) { + pr_warn("idle states already initialized on cpu %u\n", + cpu); + continue; + } + per_cpu(psci_power_state, cpu) = psci_states; + } + + + for (i = 0; i < drv->state_count; i++) { + u32 psci_power_state; + + if (!state_nodes[i]) { + /* + * An index with a missing node pointer falls back to + * simple STANDBYWFI + */ + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; + continue; + } + + if (of_property_read_u32(state_nodes[i], "entry-method-param", + &psci_power_state)) { + pr_warn(" * %s missing entry-method-param property\n", + state_nodes[i]->full_name); + /* + * If entry-method-param property is missing, fall + * back to STANDBYWFI state + */ + psci_states[i].type = PSCI_POWER_STATE_TYPE_STANDBY; + continue; + } + + pr_debug("psci-power-state %#x index %u\n", psci_power_state, + i); + psci_power_state_unpack(psci_power_state, &psci_states[i]); + } + + return 0; +} + static int get_set_conduit_method(struct device_node *np) { const char *method; @@ -435,6 +523,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu) } #endif +#ifdef CONFIG_ARM64_CPU_SUSPEND +static int cpu_psci_cpu_suspend(unsigned long index) +{ + struct psci_power_state *state = __get_cpu_var(psci_power_state); + + if (!state) + return -EOPNOTSUPP; + + return psci_ops.cpu_suspend(state[index], virt_to_phys(cpu_resume)); +} +#endif + const struct cpu_operations cpu_psci_ops = { .name = "psci", .cpu_init = cpu_psci_cpu_init, @@ -445,6 +545,9 @@ const struct cpu_operations cpu_psci_ops = { .cpu_die = cpu_psci_cpu_die, .cpu_kill = cpu_psci_cpu_kill, #endif +#ifdef CONFIG_ARM64_CPU_SUSPEND + .cpu_suspend = cpu_psci_cpu_suspend, +#endif }; #endif