@@ -109,28 +109,6 @@ struct gsi_event {
u8 chid;
};
-/* Hardware values representing an event ring immediate command opcode */
-enum gsi_evt_cmd_opcode {
- GSI_EVT_ALLOCATE = 0x0,
- GSI_EVT_RESET = 0x9,
- GSI_EVT_DE_ALLOC = 0xa,
-};
-
-/* Hardware values representing a generic immediate command opcode */
-enum gsi_generic_cmd_opcode {
- GSI_GENERIC_HALT_CHANNEL = 0x1,
- GSI_GENERIC_ALLOCATE_CHANNEL = 0x2,
-};
-
-/* Hardware values representing a channel immediate command opcode */
-enum gsi_ch_cmd_opcode {
- GSI_CH_ALLOCATE = 0x0,
- GSI_CH_START = 0x1,
- GSI_CH_STOP = 0x2,
- GSI_CH_RESET = 0x9,
- GSI_CH_DE_ALLOC = 0xa,
-};
-
/** gsi_channel_scratch_gpi - GPI protocol scratch register
* @max_outstanding_tre:
* Defines the maximum number of TREs allowed in a single transaction
@@ -223,6 +223,14 @@ enum gsi_channel_type {
(0x0001f008 + 0x4000 * (ee))
#define CH_CHID_FMASK GENMASK(7, 0)
#define CH_OPCODE_FMASK GENMASK(31, 24)
+/** enum gsi_ch_cmd_opcode - CH_OPCODE field values in CH_CMD */
+enum gsi_ch_cmd_opcode {
+ GSI_CH_ALLOCATE = 0x0,
+ GSI_CH_START = 0x1,
+ GSI_CH_STOP = 0x2,
+ GSI_CH_RESET = 0x9,
+ GSI_CH_DE_ALLOC = 0xa,
+};
#define GSI_EV_CH_CMD_OFFSET \
GSI_EE_N_EV_CH_CMD_OFFSET(GSI_EE_AP)
@@ -230,6 +238,12 @@ enum gsi_channel_type {
(0x0001f010 + 0x4000 * (ee))
#define EV_CHID_FMASK GENMASK(7, 0)
#define EV_OPCODE_FMASK GENMASK(31, 24)
+/** enum gsi_evt_cmd_opcode - EV_OPCODE field values in EV_CH_CMD */
+enum gsi_evt_cmd_opcode {
+ GSI_EVT_ALLOCATE = 0x0,
+ GSI_EVT_RESET = 0x9,
+ GSI_EVT_DE_ALLOC = 0xa,
+};
#define GSI_GENERIC_CMD_OFFSET \
GSI_EE_N_GENERIC_CMD_OFFSET(GSI_EE_AP)
@@ -238,6 +252,11 @@ enum gsi_channel_type {
#define GENERIC_OPCODE_FMASK GENMASK(4, 0)
#define GENERIC_CHID_FMASK GENMASK(9, 5)
#define GENERIC_EE_FMASK GENMASK(13, 10)
+/** enum gsi_generic_cmd_opcode - GENERIC_OPCODE field values in GENERIC_CMD */
+enum gsi_generic_cmd_opcode {
+ GSI_GENERIC_HALT_CHANNEL = 0x1,
+ GSI_GENERIC_ALLOCATE_CHANNEL = 0x2,
+};
#define GSI_GSI_HW_PARAM_2_OFFSET \
GSI_EE_N_GSI_HW_PARAM_2_OFFSET(GSI_EE_AP)
The gsi_ch_cmd_opcode, gsi_evt_cmd_opcode, and gsi_generic_cmd_opcode enumerated types are values that fields in the GSI command registers can take on. Move their definitions out of "gsi.c" and into "gsi_reg.h", alongside the definition of registers they are associated with. Signed-off-by: Alex Elder <elder@linaro.org> --- drivers/net/ipa/gsi.c | 22 ---------------------- drivers/net/ipa/gsi_reg.h | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 22 deletions(-) -- 2.20.1