@@ -93,6 +93,24 @@ properties:
- device
- dual
+ typec-power-opmode:
+ description: Determines the power operation mode that the Type C connector
+ will support and will advertise through CC pins when it has no power
+ delivery support.
+ - "default" corresponds to default USB voltage and current defined by the
+ USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
+ 5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
+ operation respectively.
+ - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
+ Type-C Cable and Connector specification, when Power Delivery is not
+ supported.
+ allOf:
+ - $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - default
+ - 1.5A
+ - 3.0A
+
# The following are optional properties for "usb-c-connector" with power
# delivery support.
source-pdos:
@@ -192,6 +210,12 @@ allOf:
type:
const: micro
+anyOf:
+ - not:
+ required:
+ - typec-power-opmode
+ - new-source-frs-typec-current
+
additionalProperties: true
examples:
Power operation mode may depends on hardware design, so, add the optional property typec-power-opmode for usb-c connector to select the power operation mode capability. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- Hi Bahdri, Rob, I've added the exlusion with FRS property, but new FRS property name should be use here so, be careful. --- .../bindings/connector/usb-connector.yaml | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)