| Message ID | 20201109170409.4498-8-kishon@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | J7200: Add PCIe DT nodes to Enable PCIe | expand |
On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote: > x2 lane PCIe slot in the common processor board is enabled and connected to > j7200 SOM. Add PCIe DT node in common processor board to reflect the > same. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> > .../boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > index 65a2e5aeb050..174a55a18522 100644 > --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts > @@ -6,6 +6,7 @@ > /dts-v1/; > > #include "k3-j7200-som-p0.dtsi" > +#include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/net/ti-dp83867.h> > #include <dt-bindings/mux/ti-serdes.h> > #include <dt-bindings/phy/phy.h> > @@ -236,3 +237,17 @@ > resets = <&serdes_wiz0 3>; > }; > }; > + > +&pcie1_rc { > + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; > + phys = <&serdes0_pcie_link>; > + phy-names = "pcie-phy"; > + num-lanes = <2>; > +}; > + > +&pcie1_ep { > + phys = <&serdes0_pcie_link>; > + phy-names = "pcie-phy"; > + num-lanes = <2>; > + status = "disabled"; > +}; >
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 65a2e5aeb050..174a55a18522 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "k3-j7200-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/mux/ti-serdes.h> #include <dt-bindings/phy/phy.h> @@ -236,3 +237,17 @@ resets = <&serdes_wiz0 3>; }; }; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +};
x2 lane PCIe slot in the common processor board is enabled and connected to j7200 SOM. Add PCIe DT node in common processor board to reflect the same. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) -- 2.17.1