[RESEND,03/19] scsi: lpfc: lpfc_scsi: Fix a whole host of kernel-doc issues

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 4ffdfd2c8604d..0f0ab86cf1923 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -313,7 +313,7 @@  lpfc_scsi_dev_block(struct lpfc_hba *phba)
 /**
  * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
  * @vport: The virtual port for which this call being executed.
- * @num_to_allocate: The requested number of buffers to allocate.
+ * @num_to_alloc: The requested number of buffers to allocate.
  *
  * This routine allocates a scsi buffer for device with SLI-3 interface spec,
  * the scsi buffer contains all the necessary information needed to initiate
@@ -497,6 +497,7 @@  lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
  * lpfc_sli4_io_xri_aborted - Fast-path process of fcp xri abort
  * @phba: pointer to lpfc hba data structure.
  * @axri: pointer to the fcp xri abort wcqe structure.
+ * @idx: index into hdwq
  *
  * This routine is invoked by the worker thread to process a SLI4 fast-path
  * FCP or NVME aborted xri.
@@ -579,6 +580,8 @@  lpfc_sli4_io_xri_aborted(struct lpfc_hba *phba,
 /**
  * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -618,6 +621,8 @@  lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 /**
  * lpfc_get_scsi_buf_s4 - Get a scsi buffer from io_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @hdwq io_buf_list
  * and returns to caller.
@@ -730,6 +735,8 @@  lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 /**
  * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to a node-list data structure.
+ * @cmnd: Pointer to scsi_cmnd data structure.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
  * and returns to caller.
@@ -976,7 +983,7 @@  lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
  * @sc: The SCSI command to examine
  * @reftag: (out) BlockGuard reference tag for transmitted data
  * @apptag: (out) BlockGuard application tag for transmitted data
- * @new_guard (in) Value to replace CRC with if needed
+ * @new_guard: (in) Value to replace CRC with if needed
  *
  * Returns BG_ERR_* bit mask or 0 if request ignored
  **/
@@ -1381,8 +1388,8 @@  lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * the specified SCSI command.
  * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
- * @txopt: (out) BlockGuard operation for transmitted data
- * @rxopt: (out) BlockGuard operation for received data
+ * @txop: (out) BlockGuard operation for transmitted data
+ * @rxop: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
@@ -1461,8 +1468,8 @@  lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * the specified SCSI command in order to force a guard tag error.
  * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
- * @txopt: (out) BlockGuard operation for transmitted data
- * @rxopt: (out) BlockGuard operation for received data
+ * @txop: (out) BlockGuard operation for transmitted data
+ * @rxop: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
@@ -1533,7 +1540,7 @@  lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @phba: The Hba for which this call is being executed.
  * @sc: pointer to scsi command we're working on
  * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
+ * @datasegcnt: number of segments of data that have been dma mapped
  *
  * This function sets up BPL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
@@ -1920,7 +1927,8 @@  lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @phba: The Hba for which this call is being executed.
  * @sc: pointer to scsi command we're working on
  * @sgl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
+ * @datasegcnt: number of segments of data that have been dma mapped
+ * @lpfc_cmd: lpfc scsi command object pointer.
  *
  * This function sets up SGL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
@@ -2094,6 +2102,7 @@  lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  * @sgl: pointer to buffer list for protection groups
  * @datacnt: number of segments of data that have been dma mapped
  * @protcnt: number of segment of protection data that have been dma mapped
+ * @lpfc_cmd: lpfc scsi command object pointer.
  *
  * This function sets up SGL buffer list for protection groups of
  * type LPFC_PG_TYPE_DIF
@@ -4465,12 +4474,11 @@  void lpfc_poll_start_timer(struct lpfc_hba * phba)
 
 /**
  * lpfc_poll_timeout - Restart polling timer
- * @ptr: Map to lpfc_hba data structure pointer.
+ * @t: Timer construct where lpfc_hba data structure pointer is obtained.
  *
  * This routine restarts fcp_poll timer, when FCP ring  polling is enable
  * and FCP Ring interrupt is disable.
  **/
-
 void lpfc_poll_timeout(struct timer_list *t)
 {
 	struct lpfc_hba *phba = from_timer(phba, t, fcp_poll_timer);
@@ -4486,8 +4494,8 @@  void lpfc_poll_timeout(struct timer_list *t)
 
 /**
  * lpfc_queuecommand - scsi_host_template queuecommand entry point
+ * @shost: kernel scsi host pointer.
  * @cmnd: Pointer to scsi_cmnd data structure.
- * @done: Pointer to done routine.
  *
  * Driver registers this routine to scsi midlayer to submit a @cmd to process.
  * This routine prepares an IOCB from scsi command and provides to firmware.
@@ -5015,7 +5023,7 @@  lpfc_check_fcp_rsp(struct lpfc_vport *vport, struct lpfc_io_buf *lpfc_cmd)
 /**
  * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
  * @vport: The virtual port for which this call is being executed.
- * @rdata: Pointer to remote port local data
+ * @cmnd: Pointer to scsi_cmnd data structure.
  * @tgt_id: Target ID of remote device.
  * @lun_id: Lun number for the TMF
  * @task_mgmt_cmd: type of TMF to send
@@ -5664,10 +5672,11 @@  lpfc_slave_destroy(struct scsi_device *sdev)
 
 /**
  * lpfc_create_device_data - creates and initializes device data structure for OAS
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun on target
+ * @pri: Priority
  * @atomic_create: Flag to indicate if memory should be allocated using the
  *		  GFP_ATOMIC flag or not.
  *
@@ -5717,7 +5726,7 @@  lpfc_create_device_data(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_delete_device_data - frees a device data structure for OAS
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @lun_info: Pointer to device data structure to free.
  *
  * This routine frees the previously allocated device data structure passed.
@@ -5740,7 +5749,7 @@  lpfc_delete_device_data(struct lpfc_hba *phba,
 
 /**
  * __lpfc_get_device_data - returns the device data for the specified lun
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @list: Point to list to search.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
@@ -5782,7 +5791,7 @@  __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
 
 /**
  * lpfc_find_next_oas_lun - searches for the next oas lun
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @starting_lun: Pointer to the lun to start searching for
@@ -5790,6 +5799,7 @@  __lpfc_get_device_data(struct lpfc_hba *phba, struct list_head *list,
  * @found_target_wwpn: Pointer to the found lun's target wwpn information
  * @found_lun: Pointer to the found lun.
  * @found_lun_status: Pointer to status of the found lun.
+ * @found_lun_pri: Pointer to priority of the found lun.
  *
  * This routine searches the luns list for the specified lun
  * or the first lun for the vport/target.  If the vport wwpn contains
@@ -5884,10 +5894,11 @@  lpfc_find_next_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_enable_oas_lun - enables a lun for OAS operations
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun
+ * @pri: Priority
  *
  * This routine enables a lun for oas operations.  The routines does so by
  * doing the following :
@@ -5944,10 +5955,11 @@  lpfc_enable_oas_lun(struct lpfc_hba *phba, struct lpfc_name *vport_wwpn,
 
 /**
  * lpfc_disable_oas_lun - disables a lun for OAS operations
- * @pha: Pointer to host bus adapter structure.
+ * @phba: Pointer to host bus adapter structure.
  * @vport_wwpn: Pointer to vport's wwpn information
  * @target_wwpn: Pointer to target's wwpn information
  * @lun: Lun
+ * @pri: Priority
  *
  * This routine disables a lun for oas operations.  The routines does so by
  * doing the following :