@@ -12,7 +12,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
@@ -52,6 +52,7 @@ struct gab {
int level;
int status;
bool cable_plugged;
+ struct gpio_desc *charge_finished;
};
static struct gab *to_generic_bat(struct power_supply *psy)
@@ -91,13 +92,9 @@ static const enum power_supply_property gab_dyn_props[] = {
static bool gab_charge_finished(struct gab *adc_bat)
{
- struct gab_platform_data *pdata = adc_bat->pdata;
- bool ret = gpio_get_value(pdata->gpio_charge_finished);
- bool inv = pdata->gpio_inverted;
-
- if (!gpio_is_valid(pdata->gpio_charge_finished))
+ if (!adc_bat->charge_finished)
return false;
- return ret ^ inv;
+ return gpiod_get_value(adc_bat->charge_finished);
}
static int gab_get_status(struct gab *adc_bat)
@@ -327,18 +324,17 @@ static int gab_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&adc_bat->bat_work, gab_work);
- if (gpio_is_valid(pdata->gpio_charge_finished)) {
+ adc_bat->charge_finished = devm_gpiod_get_optional(&pdev->dev,
+ "charged", GPIOD_IN);
+ if (adc_bat->charge_finished) {
int irq;
- ret = gpio_request(pdata->gpio_charge_finished, "charged");
- if (ret)
- goto gpio_req_fail;
- irq = gpio_to_irq(pdata->gpio_charge_finished);
+ irq = gpiod_to_irq(adc_bat->charge_finished);
ret = request_any_context_irq(irq, gab_charged,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"battery charged", adc_bat);
if (ret < 0)
- goto err_gpio;
+ goto gpio_req_fail;
}
platform_set_drvdata(pdev, adc_bat);
@@ -348,8 +344,6 @@ static int gab_probe(struct platform_device *pdev)
msecs_to_jiffies(0));
return 0;
-err_gpio:
- gpio_free(pdata->gpio_charge_finished);
gpio_req_fail:
power_supply_unregister(adc_bat->psy);
err_reg_fail:
@@ -367,14 +361,11 @@ static int gab_remove(struct platform_device *pdev)
{
int chan;
struct gab *adc_bat = platform_get_drvdata(pdev);
- struct gab_platform_data *pdata = adc_bat->pdata;
power_supply_unregister(adc_bat->psy);
- if (gpio_is_valid(pdata->gpio_charge_finished)) {
- free_irq(gpio_to_irq(pdata->gpio_charge_finished), adc_bat);
- gpio_free(pdata->gpio_charge_finished);
- }
+ if (adc_bat->charge_finished)
+ free_irq(gpiod_to_irq(adc_bat->charge_finished), adc_bat);
for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
if (adc_bat->channel[chan])
@@ -11,16 +11,12 @@
* @battery_info: recommended structure to specify static power supply
* parameters
* @cal_charge: calculate charge level.
- * @gpio_charge_finished: gpio for the charger.
- * @gpio_inverted: Should be 1 if the GPIO is active low otherwise 0
* @jitter_delay: delay required after the interrupt to check battery
* status.Default set is 10ms.
*/
struct gab_platform_data {
struct power_supply_info battery_info;
int (*cal_charge)(long value);
- int gpio_charge_finished;
- bool gpio_inverted;
int jitter_delay;
};
This driver uses platform data to pass GPIO lines using the deprecated global GPIO numbers. There are no in-tree users of this platform data. Any out-of-tree or coming users of this driver can easily be migrated to use machine descriptor tables as described in Documentation/driver-api/gpio/board.rst section "platform data". Cc: Anish Kumar <anish198519851985@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/power/supply/generic-adc-battery.c | 31 ++++++++-------------- include/linux/power/generic-adc-battery.h | 4 --- 2 files changed, 11 insertions(+), 24 deletions(-) -- 2.26.2