diff mbox series

[v7,15/47] dt-bindings: tegra30-actmon: Document OPP and interconnect properties

Message ID 20201104164923.21238-16-digetx@gmail.com
State Accepted
Commit 254a42ac93900f92307a280daf4ccbd118c72255
Headers show
Series Introduce memory interconnect for NVIDIA Tegra SoCs | expand

Commit Message

Dmitry Osipenko Nov. 4, 2020, 4:48 p.m. UTC 
Document EMC DFS OPP table and interconnect paths that will be used
for scaling of system's memory bandwidth based on memory utilization
statistics. Previously ACTMON was supposed to drive EMC clock rate
directly, but now it should do it using interconnect framework in order
to support shared voltage scaling in addition to the frequency scaling.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../arm/tegra/nvidia,tegra30-actmon.txt       | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
index ea670a5d7ee3..897eedfa2bc8 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
@@ -18,8 +18,30 @@  clock-names. See ../../clock/clock-bindings.txt for details.
 ../../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - actmon
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- interconnects: Should contain entries for memory clients sitting on
+                 MC->EMC memory interconnect path.
+- interconnect-names: Should include name of the interconnect path for each
+                      interconnect entry. Consult TRM documentation for
+                      information about available memory clients, see MEMORY
+                      CONTROLLER section.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: bitfield indicating SoC speedo ID mask
+- opp-peak-kBps: peak bandwidth of the memory channel
 
 Example:
+	dfs_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp@12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <51000>;
+		};
+		...
+	};
+
 	actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
@@ -29,4 +51,7 @@  Example:
 		clock-names = "actmon", "emc";
 		resets = <&tegra_car 119>;
 		reset-names = "actmon";
+		operating-points-v2 = <&dfs_opp_table>;
+		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
+		interconnect-names = "cpu";
 	};