| Message ID | 20201104164923.21238-46-digetx@gmail.com |
|---|---|
| State | Accepted |
| Commit | 16e8b2a7cb886bcc3dd89ad28948d374a2319bbc |
| Headers | show |
| Series | Introduce memory interconnect for NVIDIA Tegra SoCs | expand |
Hi Dmitry, On 11/5/20 1:49 AM, Dmitry Osipenko wrote: > This patch moves ACTMON driver away from generating OPP table by itself, > transitioning it to use the table which comes from device-tree. This > change breaks compatibility with older device-trees in order to bring > support for the interconnect framework to the driver. This is a mandatory > change which needs to be done in order to implement interconnect-based > memory DVFS. Users of legacy device-trees will get a message telling that > theirs DT needs to be upgraded. Now ACTMON issues memory bandwidth request > using dev_pm_opp_set_bw(), instead of driving EMC clock rate directly. > > Tested-by: Peter Geis <pgwipeout@gmail.com> > Tested-by: Nicolas Chauvet <kwizart@gmail.com> > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> > --- > drivers/devfreq/tegra30-devfreq.c | 96 +++++++++++++++++-------------- > 1 file changed, 54 insertions(+), 42 deletions(-) > > diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c > index 38cc0d014738..4db027ca17e1 100644 > --- a/drivers/devfreq/tegra30-devfreq.c > +++ b/drivers/devfreq/tegra30-devfreq.c > @@ -19,6 +19,8 @@ > #include <linux/reset.h> > #include <linux/workqueue.h> > > +#include <soc/tegra/fuse.h> > + > #include "governor.h" > > #define ACTMON_GLB_STATUS 0x0 > @@ -155,6 +157,7 @@ struct tegra_devfreq_device { > > struct tegra_devfreq { > struct devfreq *devfreq; > + struct opp_table *opp_table; > > struct reset_control *reset; > struct clk *clock; > @@ -612,34 +615,19 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra) > static int tegra_devfreq_target(struct device *dev, unsigned long *freq, > u32 flags) > { > - struct tegra_devfreq *tegra = dev_get_drvdata(dev); > - struct devfreq *devfreq = tegra->devfreq; > struct dev_pm_opp *opp; > - unsigned long rate; > - int err; > + int ret; > > opp = devfreq_recommended_opp(dev, freq, flags); > if (IS_ERR(opp)) { > dev_err(dev, "Failed to find opp for %lu Hz\n", *freq); > return PTR_ERR(opp); > } > - rate = dev_pm_opp_get_freq(opp); > - dev_pm_opp_put(opp); > - > - err = clk_set_min_rate(tegra->emc_clock, rate * KHZ); > - if (err) > - return err; > - > - err = clk_set_rate(tegra->emc_clock, 0); > - if (err) > - goto restore_min_rate; > - > - return 0; > > -restore_min_rate: > - clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq); > + ret = dev_pm_opp_set_bw(dev, opp); > + dev_pm_opp_put(opp); > > - return err; > + return ret; > } > > static int tegra_devfreq_get_dev_status(struct device *dev, > @@ -655,7 +643,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev, > stat->private_data = tegra; > > /* The below are to be used by the other governors */ > - stat->current_frequency = cur_freq; > + stat->current_frequency = cur_freq * KHZ; > > actmon_dev = &tegra->devices[MCALL]; > > @@ -705,7 +693,12 @@ static int tegra_governor_get_target(struct devfreq *devfreq, > target_freq = max(target_freq, dev->target_freq); > } > > - *freq = target_freq; > + /* > + * tegra-devfreq driver operates with KHz units, while OPP table > + * entries use Hz units. Hence we need to convert the units for the > + * devfreq core. > + */ > + *freq = target_freq * KHZ; > > return 0; > } > @@ -774,13 +767,22 @@ static struct devfreq_governor tegra_devfreq_governor = { > > static int tegra_devfreq_probe(struct platform_device *pdev) > { > + u32 hw_version = BIT(tegra_sku_info.soc_speedo_id); > struct tegra_devfreq_device *dev; > struct tegra_devfreq *tegra; > + struct opp_table *opp_table; > struct devfreq *devfreq; > unsigned int i; > long rate; > int err; > > + /* legacy device-trees don't have OPP table and must be updated */ > + if (!device_property_present(&pdev->dev, "operating-points-v2")) { > + dev_err(&pdev->dev, > + "OPP table not found, please update your device tree\n"); > + return -ENODEV; > + } > + > tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL); > if (!tegra) > return -ENOMEM; > @@ -822,11 +824,31 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > return err; > } > > + tegra->opp_table = dev_pm_opp_get_opp_table(&pdev->dev); > + err = PTR_ERR_OR_ZERO(tegra->opp_table); > + if (err) { > + dev_err(&pdev->dev, "Failed to prepare OPP table: %d\n", err); > + return err; > + } > + > + opp_table = dev_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1); > + err = PTR_ERR_OR_ZERO(opp_table); > + if (err) { > + dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err); > + goto put_table; > + } > + > + err = dev_pm_opp_of_add_table(&pdev->dev); > + if (err) { > + dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err); > + goto put_hw; > + } > + > err = clk_prepare_enable(tegra->clock); > if (err) { > dev_err(&pdev->dev, > "Failed to prepare and enable ACTMON clock\n"); > - return err; > + goto remove_table; > } > > err = reset_control_reset(tegra->reset); > @@ -850,23 +872,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > dev->regs = tegra->regs + dev->config->offset; > } > > - for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) { > - rate = clk_round_rate(tegra->emc_clock, rate); > - > - if (rate < 0) { > - dev_err(&pdev->dev, > - "Failed to round clock rate: %ld\n", rate); > - err = rate; > - goto remove_opps; > - } > - > - err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0); > - if (err) { > - dev_err(&pdev->dev, "Failed to add OPP: %d\n", err); > - goto remove_opps; > - } > - } > - > platform_set_drvdata(pdev, tegra); > > tegra->clk_rate_change_nb.notifier_call = tegra_actmon_clk_notify_cb; > @@ -882,7 +887,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > } > > tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock); > - tegra_devfreq_profile.initial_freq /= KHZ; > > devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, > "tegra_actmon", NULL); > @@ -902,6 +906,12 @@ static int tegra_devfreq_probe(struct platform_device *pdev) > reset_control_reset(tegra->reset); > disable_clk: > clk_disable_unprepare(tegra->clock); > +remove_table: > + dev_pm_opp_of_remove_table(&pdev->dev); > +put_hw: > + dev_pm_opp_put_supported_hw(tegra->opp_table); > +put_table: > + dev_pm_opp_put_opp_table(tegra->opp_table); > > return err; > } > @@ -913,11 +923,13 @@ static int tegra_devfreq_remove(struct platform_device *pdev) > devfreq_remove_device(tegra->devfreq); > devfreq_remove_governor(&tegra_devfreq_governor); > > - dev_pm_opp_remove_all_dynamic(&pdev->dev); > - > reset_control_reset(tegra->reset); > clk_disable_unprepare(tegra->clock); > > + dev_pm_opp_of_remove_table(&pdev->dev); > + dev_pm_opp_put_supported_hw(tegra->opp_table); > + dev_pm_opp_put_opp_table(tegra->opp_table); > + > return 0; > } > > Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c index 38cc0d014738..4db027ca17e1 100644 --- a/drivers/devfreq/tegra30-devfreq.c +++ b/drivers/devfreq/tegra30-devfreq.c @@ -19,6 +19,8 @@ #include <linux/reset.h> #include <linux/workqueue.h> +#include <soc/tegra/fuse.h> + #include "governor.h" #define ACTMON_GLB_STATUS 0x0 @@ -155,6 +157,7 @@ struct tegra_devfreq_device { struct tegra_devfreq { struct devfreq *devfreq; + struct opp_table *opp_table; struct reset_control *reset; struct clk *clock; @@ -612,34 +615,19 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra) static int tegra_devfreq_target(struct device *dev, unsigned long *freq, u32 flags) { - struct tegra_devfreq *tegra = dev_get_drvdata(dev); - struct devfreq *devfreq = tegra->devfreq; struct dev_pm_opp *opp; - unsigned long rate; - int err; + int ret; opp = devfreq_recommended_opp(dev, freq, flags); if (IS_ERR(opp)) { dev_err(dev, "Failed to find opp for %lu Hz\n", *freq); return PTR_ERR(opp); } - rate = dev_pm_opp_get_freq(opp); - dev_pm_opp_put(opp); - - err = clk_set_min_rate(tegra->emc_clock, rate * KHZ); - if (err) - return err; - - err = clk_set_rate(tegra->emc_clock, 0); - if (err) - goto restore_min_rate; - - return 0; -restore_min_rate: - clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq); + ret = dev_pm_opp_set_bw(dev, opp); + dev_pm_opp_put(opp); - return err; + return ret; } static int tegra_devfreq_get_dev_status(struct device *dev, @@ -655,7 +643,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev, stat->private_data = tegra; /* The below are to be used by the other governors */ - stat->current_frequency = cur_freq; + stat->current_frequency = cur_freq * KHZ; actmon_dev = &tegra->devices[MCALL]; @@ -705,7 +693,12 @@ static int tegra_governor_get_target(struct devfreq *devfreq, target_freq = max(target_freq, dev->target_freq); } - *freq = target_freq; + /* + * tegra-devfreq driver operates with KHz units, while OPP table + * entries use Hz units. Hence we need to convert the units for the + * devfreq core. + */ + *freq = target_freq * KHZ; return 0; } @@ -774,13 +767,22 @@ static struct devfreq_governor tegra_devfreq_governor = { static int tegra_devfreq_probe(struct platform_device *pdev) { + u32 hw_version = BIT(tegra_sku_info.soc_speedo_id); struct tegra_devfreq_device *dev; struct tegra_devfreq *tegra; + struct opp_table *opp_table; struct devfreq *devfreq; unsigned int i; long rate; int err; + /* legacy device-trees don't have OPP table and must be updated */ + if (!device_property_present(&pdev->dev, "operating-points-v2")) { + dev_err(&pdev->dev, + "OPP table not found, please update your device tree\n"); + return -ENODEV; + } + tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL); if (!tegra) return -ENOMEM; @@ -822,11 +824,31 @@ static int tegra_devfreq_probe(struct platform_device *pdev) return err; } + tegra->opp_table = dev_pm_opp_get_opp_table(&pdev->dev); + err = PTR_ERR_OR_ZERO(tegra->opp_table); + if (err) { + dev_err(&pdev->dev, "Failed to prepare OPP table: %d\n", err); + return err; + } + + opp_table = dev_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1); + err = PTR_ERR_OR_ZERO(opp_table); + if (err) { + dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err); + goto put_table; + } + + err = dev_pm_opp_of_add_table(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err); + goto put_hw; + } + err = clk_prepare_enable(tegra->clock); if (err) { dev_err(&pdev->dev, "Failed to prepare and enable ACTMON clock\n"); - return err; + goto remove_table; } err = reset_control_reset(tegra->reset); @@ -850,23 +872,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev) dev->regs = tegra->regs + dev->config->offset; } - for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) { - rate = clk_round_rate(tegra->emc_clock, rate); - - if (rate < 0) { - dev_err(&pdev->dev, - "Failed to round clock rate: %ld\n", rate); - err = rate; - goto remove_opps; - } - - err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0); - if (err) { - dev_err(&pdev->dev, "Failed to add OPP: %d\n", err); - goto remove_opps; - } - } - platform_set_drvdata(pdev, tegra); tegra->clk_rate_change_nb.notifier_call = tegra_actmon_clk_notify_cb; @@ -882,7 +887,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev) } tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock); - tegra_devfreq_profile.initial_freq /= KHZ; devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile, "tegra_actmon", NULL); @@ -902,6 +906,12 @@ static int tegra_devfreq_probe(struct platform_device *pdev) reset_control_reset(tegra->reset); disable_clk: clk_disable_unprepare(tegra->clock); +remove_table: + dev_pm_opp_of_remove_table(&pdev->dev); +put_hw: + dev_pm_opp_put_supported_hw(tegra->opp_table); +put_table: + dev_pm_opp_put_opp_table(tegra->opp_table); return err; } @@ -913,11 +923,13 @@ static int tegra_devfreq_remove(struct platform_device *pdev) devfreq_remove_device(tegra->devfreq); devfreq_remove_governor(&tegra_devfreq_governor); - dev_pm_opp_remove_all_dynamic(&pdev->dev); - reset_control_reset(tegra->reset); clk_disable_unprepare(tegra->clock); + dev_pm_opp_of_remove_table(&pdev->dev); + dev_pm_opp_put_supported_hw(tegra->opp_table); + dev_pm_opp_put_opp_table(tegra->opp_table); + return 0; }