@@ -27,37 +27,65 @@
serial3 = &v2m_serial3;
};
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_suspend = <0xc4000001>;
+ cpu_off = <0x84000002>;
+ cpu_on = <0xc4000003>;
+ };
+
cpus {
#address-cells = <2>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ entry-method-param = <0x0010000>;
+ entry-latency-us = <40>;
+ exit-latency-us = <100>;
+ min-residency-us = <150>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ entry-method-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+
cpu@0 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
};
};
This patch updates the RTSM dts file with PSCI bindings and nodes describing the AEMv8 model idle states parameters. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> --- arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 44 +++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 8 deletions(-)