@@ -125,13 +125,17 @@ EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
static struct resource tusb_resources[] = {
/* Order is significant! The start/end fields
- * are updated during setup..
+ * are updated by GPMC driver, see gpmc_probe_legacy()
*/
- { /* Asynchronous access */
- .flags = IORESOURCE_MEM,
+ { /* Asynchronous access, for PIO */
+ .flags = IORESOURCE_MEM,
+ .start = 0,
+ .end = 0x9ff,
},
- { /* Synchronous access */
- .flags = IORESOURCE_MEM,
+ { /* Synchronous access, for DMA */
+ .flags = IORESOURCE_MEM,
+ .start = 0,
+ .end = 0x9ff,
},
{ /* IRQ */
.name = "mc",
@@ -163,37 +167,16 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
int status;
static char error[] __initdata =
KERN_ERR "tusb6010 init error %d, %d\n";
+ struct gpmc_device_timings dev_async_t;
+ struct gpmc_device_timings dev_sync_t;
- /* ASYNC region, primarily for PIO */
- status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
- &tusb_resources[0].start);
- if (status < 0) {
- printk(error, 1, status);
- return status;
- }
- tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ /* GPMC settings */
tusb_async.wait_pin = waitpin;
async_cs = async;
- status = gpmc_cs_program_settings(async_cs, &tusb_async);
- if (status < 0)
- return status;
-
- /* SYNC region, primarily for DMA */
- status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
- &tusb_resources[1].start);
- if (status < 0) {
- printk(error, 2, status);
- return status;
- }
- tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
tusb_sync.wait_pin = waitpin;
sync_cs = sync;
- status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
- if (status < 0)
- return status;
-
/* IRQ */
status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
if (status < 0) {
@@ -208,11 +191,10 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return -ENODEV;
}
refclk_psec = ps_refclk;
- status = tusb6010_platform_retime(1);
- if (status < 0) {
- printk(error, 5, status);
- return status;
- }
+
+ /* device timings */
+ tusb_get_async_timings(ps_refclk, &dev_async_t);
+ tusb_get_sync_timings(ps_refclk, &dev_sync_t);
/* finish device setup ... */
if (!data) {
@@ -240,11 +222,29 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
omap_mux_init_signal("sys_ndmareq5", 0);
}
- /* so far so good ... register the device */
- status = platform_device_register(&tusb_device);
- if (status < 0) {
- printk(error, 7, status);
- return status;
+ /* Register ASYNC region */
+ status = gpmc_generic_init(async_cs, false,
+ &tusb_async, &dev_async_t, NULL,
+ &tusb_device, sizeof(*data));
+
+ if (status) {
+ pr_err("%s: failed to register ASYNC region\n", __func__);
+ goto fail;
}
+
+ /* Register SYNC region */
+ status = gpmc_generic_init(sync_cs, false,
+ &tusb_sync, &dev_sync_t, NULL,
+ &tusb_device, sizeof(*data));
+ if (status) {
+ pr_err("%s: failed to register SYNC region\n", __func__);
+ goto fail;
+ }
+
return 0;
+
+fail:
+ gpio_free(irq);
+ return status;
+
}
Don't access any GPMC registers here. Use gpmc_generic_init() to pass GPMC Chip Select settings, platform device and platform data to the GPMC driver. CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/mach-omap2/usb-tusb6010.c | 78 +++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 39 deletions(-)