diff mbox series

[v3,09/11] dt-bindings: pwm: Add binding for RPi firmware PWM bus

Message ID 20201104103938.1286-10-nsaenzjulienne@suse.de
State Superseded
Headers show
Series Raspberry Pi PoE HAT fan support | expand

Commit Message

Nicolas Saenz Julienne Nov. 4, 2020, 10:39 a.m. UTC
The PWM bus controlling the fan in RPi's official PoE hat can only be
controlled by the board's co-processor.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes since v1:
 - Update bindings to use 2 #pwm-cells

 .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
 .../pwm/raspberrypi,firmware-pwm.h            | 13 ++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h

Comments

Rob Herring (Arm) Nov. 4, 2020, 7:06 p.m. UTC | #1
On Wed, 04 Nov 2020 11:39:35 +0100, Nicolas Saenz Julienne wrote:
> The PWM bus controlling the fan in RPi's official PoE hat can only be
> controlled by the board's co-processor.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---
> 
> Changes since v1:
>  - Update bindings to use 2 #pwm-cells
> 
>  .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
>  .../pwm/raspberrypi,firmware-pwm.h            | 13 ++++++++++++
>  2 files changed, 33 insertions(+)
>  create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.example.dt.yaml: firmware: pwm:#pwm-cells:0:0: 2 was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml


See https://patchwork.ozlabs.org/patch/1393804

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Nicolas Saenz Julienne Nov. 4, 2020, 7:55 p.m. UTC | #2
On Wed, 2020-11-04 at 13:06 -0600, Rob Herring wrote:
> On Wed, 04 Nov 2020 11:39:35 +0100, Nicolas Saenz Julienne wrote:
> > The PWM bus controlling the fan in RPi's official PoE hat can only be
> > controlled by the board's co-processor.
> > 
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > 
> > ---
> > 
> > Changes since v1:
> >  - Update bindings to use 2 #pwm-cells
> > 
> >  .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
> >  .../pwm/raspberrypi,firmware-pwm.h            | 13 ++++++++++++
> >  2 files changed, 33 insertions(+)
> >  create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.example.dt.yaml: firmware: pwm:#pwm-cells:0:0: 2 was expected

Yes I forgot to update the example...

Regards,
Nicolas
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index a2c63c8b1d10..8029ce958c48 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -64,6 +64,21 @@  properties:
       - compatible
       - "#reset-cells"
 
+  pwm:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-pwm
+
+      "#pwm-cells":
+        # See pwm.yaml in this directory for a description of the cells format.
+        const: 2
+
+    required:
+      - compatible
+      - "#pwm-cells"
+
     additionalProperties: false
 
 required:
@@ -87,5 +102,10 @@  examples:
             compatible = "raspberrypi,firmware-reset";
             #reset-cells = <1>;
         };
+
+        pwm: pwm {
+            compatible = "raspberrypi,firmware-pwm";
+            #pwm-cells = <1>;
+        };
     };
 ...
diff --git a/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h b/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
new file mode 100644
index 000000000000..27c5ce68847b
--- /dev/null
+++ b/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
@@ -0,0 +1,13 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Nicolas Saenz Julienne
+ * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_PWM_H
+#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_PWM_H
+
+#define RASPBERRYPI_FIRMWARE_PWM_POE		0
+#define RASPBERRYPI_FIRMWARE_PWM_NUM		1
+
+#endif