diff mbox series

[v2,1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings

Message ID 20201103055801.472736-1-vkoul@kernel.org
State Superseded
Headers show
Series [v2,1/2] dt-bindings: pinctrl: qcom: Add SDX55 pinctrl bindings | expand

Commit Message

Vinod Koul Nov. 3, 2020, 5:58 a.m. UTC 
Add device tree binding Documentation details for Qualcomm SDX55
pinctrl driver.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml  | 145 ++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml

Comments

Rob Herring (Arm) Nov. 4, 2020, 6:54 p.m. UTC | #1 
On Tue, 03 Nov 2020 11:28:00 +0530, Vinod Koul wrote:
> Add device tree binding Documentation details for Qualcomm SDX55

> pinctrl driver.

> 

> Signed-off-by: Vinod Koul <vkoul@kernel.org>

> ---

>  .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml  | 145 ++++++++++++++++++

>  1 file changed, 145 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml

> 



My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:required: ['pins', 'function'] is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: Additional properties are not allowed ('bias-pull-down', 'output-low', 'output-high', 'bias-disable', 'drive-strength', 'bias-pull-up' were unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'drive-strength' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'bias-pull-down' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'bias-pull-up' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'bias-disable' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'output-high' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties:function: 'output-low' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'required'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: patternProperties:-pins$:properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'additionalProperties'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml: ignoring, error in schema: patternProperties: -pins$: properties: required
warning: no schema found in file: ./Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml


See https://patchwork.ozlabs.org/patch/1392657

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Linus Walleij Nov. 5, 2020, 2:14 p.m. UTC | #2 
On Tue, Nov 3, 2020 at 6:58 AM Vinod Koul <vkoul@kernel.org> wrote:

> From: Jeevan Shriram <jshriram@codeaurora.org>
>
> Add initial Qualcomm SDX55 pinctrl driver to support pin configuration
> with pinctrl framewor for SDX55 SoC.
>
> Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
> [ported from downstream and tidy up]
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

The v2 version looks nice, but Rob's bot is complaining about the YAML
bindings?

Please look into it when you have time, apart from this the patch
set seems complete, include Bjorn's ACKs on reposts please.

Yours,
Linus Walleij
Vinod Koul Nov. 6, 2020, 9:41 a.m. UTC | #3 
On 05-11-20, 15:14, Linus Walleij wrote:
> On Tue, Nov 3, 2020 at 6:58 AM Vinod Koul <vkoul@kernel.org> wrote:
> 
> > From: Jeevan Shriram <jshriram@codeaurora.org>
> >
> > Add initial Qualcomm SDX55 pinctrl driver to support pin configuration
> > with pinctrl framewor for SDX55 SoC.
> >
> > Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
> > [ported from downstream and tidy up]
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> 
> The v2 version looks nice, but Rob's bot is complaining about the YAML
> bindings?
> 
> Please look into it when you have time, apart from this the patch
> set seems complete, include Bjorn's ACKs on reposts please.

Thanks will do, looks like I need to update the tool version I have.
Will post v3 and include changes in each version (somehow missed this
time)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 000000000000..95b77d9a608c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,145 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX55 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx55-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+                blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+                emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+                mgpi_clk, m_voc, native_char, native_char0, native_char1,
+                native_char2, native_char3, native_tsens, native_tsense,
+                nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+                pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+                qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+                qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+                qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+                qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+                qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+                qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+                qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+                qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+                qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+                spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, usb2phy_ac, vsense_trigger ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        pinctrl@1f00000 {
+                compatible = "qcom,sdx55-pinctrl";
+                reg = <0x0f100000 0x300000>;
+                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
+
+...