diff mbox series

[v2,3/5] dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC

Message ID 20200930150925.31921-4-manivannan.sadhasivam@linaro.org
State Superseded
Headers show
Series Add PCIe support for SM8250 SoC | expand

Commit Message

Manivannan Sadhasivam Sept. 30, 2020, 3:09 p.m. UTC
Document the PCIe DT bindings for SM8250 SoC. The PCIe IP is similar to
the one used on SDM845, hence just add the compatible along with the
optional "atu" register region.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 Documentation/devicetree/bindings/pci/qcom,pcie.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 02bc81bb8b2d..3b55310390a0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -13,6 +13,7 @@ 
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
 			- "qcom,pcie-sdm845" for sdm845
+			- "qcom,pcie-sm8250" for sm8250
 
 - reg:
 	Usage: required
@@ -27,6 +28,7 @@ 
 			- "dbi"	   DesignWare PCIe registers
 			- "elbi"   External local bus interface registers
 			- "config" PCIe configuration space
+			- "atu"    ATU address space (optional)
 
 - device_type:
 	Usage: required
@@ -131,7 +133,7 @@ 
 			- "slave_bus"	AXI Slave clock
 
 -clock-names:
-	Usage: required for sdm845
+	Usage: required for sdm845 and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary clock
@@ -206,7 +208,7 @@ 
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sdm845
+	Usage: required for sdm845 and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset