@@ -13,6 +13,7 @@
#define MPS2_SCC_H
#include "hw/sysbus.h"
+#include "hw/misc/led.h"
#define TYPE_MPS2_SCC "mps2-scc"
#define MPS2_SCC(obj) OBJECT_CHECK(MPS2SCC, (obj), TYPE_MPS2_SCC)
@@ -25,6 +26,7 @@ typedef struct {
/*< public >*/
MemoryRegion iomem;
+ LEDState *led[8];
uint32_t cfg0;
uint32_t cfg1;
@@ -20,11 +20,13 @@
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/module.h"
+#include "qemu/bitops.h"
#include "trace.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/registerfields.h"
#include "hw/misc/mps2-scc.h"
+#include "hw/misc/led.h"
#include "hw/qdev-properties.h"
REG32(CFG0, 0)
@@ -152,18 +154,10 @@ static void mps2_scc_write(void *opaque, hwaddr offset, uint64_t value,
s->cfg0 = value;
break;
case A_CFG1:
- /* CFG1 bits [7:0] control the board LEDs. We don't currently have
- * a mechanism for displaying this graphically, so use a trace event.
- */
- trace_mps2_scc_leds(value & 0x80 ? '*' : '.',
- value & 0x40 ? '*' : '.',
- value & 0x20 ? '*' : '.',
- value & 0x10 ? '*' : '.',
- value & 0x08 ? '*' : '.',
- value & 0x04 ? '*' : '.',
- value & 0x02 ? '*' : '.',
- value & 0x01 ? '*' : '.');
s->cfg1 = value;
+ for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) {
+ led_set_state(s->led[i], extract32(value, i, 1));
+ }
break;
case A_CFGDATA_OUT:
s->cfgdata_out = value;
@@ -245,10 +239,19 @@ static void mps2_scc_init(Object *obj)
memory_region_init_io(&s->iomem, obj, &mps2_scc_ops, s, "mps2-scc", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
+
}
static void mps2_scc_realize(DeviceState *dev, Error **errp)
{
+ MPS2SCC *s = MPS2_SCC(dev);
+
+ for (size_t i = 0; i < ARRAY_SIZE(s->led); i++) {
+ char *name = g_strdup_printf("SCC LED%zu", i);
+ s->led[i] = led_create_simple(OBJECT(dev), GPIO_POLARITY_ACTIVE_HIGH,
+ LED_COLOR_GREEN, name);
+ g_free(name);
+ }
}
static const VMStateDescription mps2_scc_vmstate = {
@@ -97,6 +97,7 @@ config MPS2_FPGAIO
config MPS2_SCC
bool
+ select LED
config TZ_MPC
bool
@@ -85,7 +85,6 @@ aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64
mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
mps2_scc_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
mps2_scc_reset(void) "MPS2 SCC: reset"
-mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c"
mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32
mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This remplaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- https://youtu.be/l9kD70uPchk?t=288 --- include/hw/misc/mps2-scc.h | 2 ++ hw/misc/mps2-scc.c | 25 ++++++++++++++----------- hw/misc/Kconfig | 1 + hw/misc/trace-events | 1 - 4 files changed, 17 insertions(+), 12 deletions(-)