diff mbox

[2/2] ASoC: max98095: Add master clock handling

Message ID 1400750228-13750-3-git-send-email-tushar.behera@linaro.org
State New
Headers show

Commit Message

Tushar Behera May 22, 2014, 9:17 a.m. UTC 
If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.

Documentation has been updated to reflect the change.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
 .../devicetree/bindings/sound/max98095.txt         |    6 ++++++
 sound/soc/codecs/max98095.c                        |   14 ++++++++++++++
 2 files changed, 20 insertions(+)

Comments

Mark Brown May 22, 2014, 10:31 a.m. UTC | #1 
On Thu, May 22, 2014 at 02:47:08PM +0530, Tushar Behera wrote:
> If master clock is provided through device tree, then update
> the master clock frequency during set_sysclk.

Same issues here.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/max98095.txt b/Documentation/devicetree/bindings/sound/max98095.txt
index bacbeaa..318a4c8 100644
--- a/Documentation/devicetree/bindings/sound/max98095.txt
+++ b/Documentation/devicetree/bindings/sound/max98095.txt
@@ -8,6 +8,12 @@  Required properties:
 
 - reg : The I2C address of the device.
 
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
 Example:
 
 max98095: codec@11 {
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c
index d6c1e4c..4d66b95 100644
--- a/sound/soc/codecs/max98095.c
+++ b/sound/soc/codecs/max98095.c
@@ -15,6 +15,7 @@ 
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
+#include <linux/clk.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -42,6 +43,7 @@  struct max98095_priv {
 	struct regmap *regmap;
 	enum max98095_type devtype;
 	struct max98095_pdata *pdata;
+	struct clk *mclk;
 	unsigned int sysclk;
 	struct max98095_cdata dai[3];
 	const char **eq_texts;
@@ -1395,6 +1397,11 @@  static int max98095_dai_set_sysclk(struct snd_soc_dai *dai,
 	if (freq == max98095->sysclk)
 		return 0;
 
+	if (!IS_ERR(max98095->mclk)) {
+		freq = clk_round_rate(max98095->mclk, freq);
+		clk_set_rate(max98095->mclk, freq);
+	}
+
 	/* Setup clocks for slave mode, and using the PLL
 	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
 	 *         0x02 (when master clk is 20MHz to 40MHz)..
@@ -2238,6 +2245,10 @@  static int max98095_probe(struct snd_soc_codec *codec)
 	struct i2c_client *client;
 	int ret = 0;
 
+	max98095->mclk = devm_clk_get(codec->dev, "mclk");
+	if (!IS_ERR(max98095->mclk))
+		clk_prepare_enable(max98095->mclk);
+
 	/* reset the codec, the DSP core, and disable all interrupts */
 	max98095_reset(codec);
 
@@ -2340,6 +2351,9 @@  static int max98095_remove(struct snd_soc_codec *codec)
 	if (max98095->headphone_jack || max98095->mic_jack)
 		max98095_jack_detect_disable(codec);
 
+	if (!IS_ERR(max98095->mclk))
+		clk_disable_unprepare(max98095->mclk);
+
 	if (client->irq)
 		free_irq(client->irq, codec);