| Message ID | 1400252476-20128-1-git-send-email-jean.pihet@linaro.org |
|---|---|
| State | New |
| Headers | show |
Hi Jean, On Fri, May 16, 2014 at 04:01:16PM +0100, Jean Pihet wrote: > When tracing with tracepoints events the IP and CPSR are set to 0, > preventing the perf code to resolve the symbols: > > ./perf record -e kmem:kmalloc cal > [ perf record: Woken up 1 times to write data ] > [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] > > ./perf report > Overhead Command Shared Object Symbol > ........ ....... ............. ........... > 40.78% cal [unknown] [.]00000000 > 31.6% cal [unknown] [.]00000000 > > The examination of the gathered samples (perf report -D) shows the IP > is set to 0 and that the samples are considered as user space samples, > while the IP should be set from the registers and the samples should be > considered as kernel samples. > > The fix is to implement perf_arch_fetch_caller_regs for ARM, which > fills the necessary registers: ip, lr, sp and cpsr (used to check > the user mode property of the samples). > > Heavily inspired from arch/arm/include/asm/kexec.h. > > Reported by Sneha Priya on linaro-dev, cf. > http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html > > Signed-off-by: Jean Pihet <jean.pihet@linaro.org> > Cc: Will Deacon <will.deacon@arm.com> > Reported-by: Sneha Priya <sneha.cse@hotmail.com> > --- > arch/arm/include/asm/perf_event.h | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h > index 7558775..d466e39 100644 > --- a/arch/arm/include/asm/perf_event.h > +++ b/arch/arm/include/asm/perf_event.h > @@ -26,6 +26,19 @@ struct pt_regs; > extern unsigned long perf_instruction_pointer(struct pt_regs *regs); > extern unsigned long perf_misc_flags(struct pt_regs *regs); > #define perf_misc_flags(regs) perf_misc_flags(regs) > + > +#define perf_arch_fetch_caller_regs(regs, __ip) { \ > + instruction_pointer(regs)= (__ip); \ > + __asm__ __volatile__ ( \ > + "mov %[_ARM_sp], sp\n\t" \ > + "str lr, %[_ARM_lr]\n\t" \ > + "mrs %[_ARM_cpsr], cpsr\n\t" \ > + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ > + [_ARM_sp] "=r" (regs->ARM_sp), \ > + [_ARM_lr] "=o" (regs->ARM_lr) \ > + : : "memory" \ > + ); \ > +} Why do we need to save lr? If it's for unwinding, what about fp? Also, why do you have a "memory" clobber and why is this block marked volatile? Will -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Hi Will, On 19 May 2014 17:39, Will Deacon <will.deacon@arm.com> wrote: > Hi Jean, > > On Fri, May 16, 2014 at 04:01:16PM +0100, Jean Pihet wrote: >> When tracing with tracepoints events the IP and CPSR are set to 0, >> preventing the perf code to resolve the symbols: >> >> ./perf record -e kmem:kmalloc cal >> [ perf record: Woken up 1 times to write data ] >> [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] >> >> ./perf report >> Overhead Command Shared Object Symbol >> ........ ....... ............. ........... >> 40.78% cal [unknown] [.]00000000 >> 31.6% cal [unknown] [.]00000000 >> >> The examination of the gathered samples (perf report -D) shows the IP >> is set to 0 and that the samples are considered as user space samples, >> while the IP should be set from the registers and the samples should be >> considered as kernel samples. >> >> The fix is to implement perf_arch_fetch_caller_regs for ARM, which >> fills the necessary registers: ip, lr, sp and cpsr (used to check >> the user mode property of the samples). >> >> Heavily inspired from arch/arm/include/asm/kexec.h. >> >> Reported by Sneha Priya on linaro-dev, cf. >> http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html >> >> Signed-off-by: Jean Pihet <jean.pihet@linaro.org> >> Cc: Will Deacon <will.deacon@arm.com> >> Reported-by: Sneha Priya <sneha.cse@hotmail.com> >> --- >> arch/arm/include/asm/perf_event.h | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> >> diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h >> index 7558775..d466e39 100644 >> --- a/arch/arm/include/asm/perf_event.h >> +++ b/arch/arm/include/asm/perf_event.h >> @@ -26,6 +26,19 @@ struct pt_regs; >> extern unsigned long perf_instruction_pointer(struct pt_regs *regs); >> extern unsigned long perf_misc_flags(struct pt_regs *regs); >> #define perf_misc_flags(regs) perf_misc_flags(regs) >> + >> +#define perf_arch_fetch_caller_regs(regs, __ip) { \ >> + instruction_pointer(regs)= (__ip); \ >> + __asm__ __volatile__ ( \ >> + "mov %[_ARM_sp], sp\n\t" \ >> + "str lr, %[_ARM_lr]\n\t" \ >> + "mrs %[_ARM_cpsr], cpsr\n\t" \ >> + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ >> + [_ARM_sp] "=r" (regs->ARM_sp), \ >> + [_ARM_lr] "=o" (regs->ARM_lr) \ >> + : : "memory" \ >> + ); \ >> +} > > Why do we need to save lr? If it's for unwinding, what about fp? Also, why > do you have a "memory" clobber and why is this block marked volatile? These are all valid questions, hence the RFC state of the patch. Here is the comment about the marco from include/linux/perf_event.h: /* * Take a snapshot of the regs. Skip ip and frame pointer to * the nth caller. We only need a few of the regs: * - ip for PERF_SAMPLE_IP * - cs for user_mode() tests * - bp for callchains * - eflags, for future purposes, just in case */ static inline void perf_fetch_caller_regs(struct pt_regs *regs) ... So, is it OK to provide a version that saves ip, cpsr (for user_mode()), lr and fp (for callchain)? The clobber and volatile are from my copy/paste from the kexec code. The memory clobber is there because we are touching the regs struct in memory. Just tell me if those are overkill, I will remove them. Thanks for reviewing, Jean > > Will -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 7558775..d466e39 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -26,6 +26,19 @@ struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_misc_flags(regs) perf_misc_flags(regs) + +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + instruction_pointer(regs)= (__ip); \ + __asm__ __volatile__ ( \ + "mov %[_ARM_sp], sp\n\t" \ + "str lr, %[_ARM_lr]\n\t" \ + "mrs %[_ARM_cpsr], cpsr\n\t" \ + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ + [_ARM_sp] "=r" (regs->ARM_sp), \ + [_ARM_lr] "=o" (regs->ARM_lr) \ + : : "memory" \ + ); \ +} #endif #endif /* __ARM_PERF_EVENT_H__ */
When tracing with tracepoints events the IP and CPSR are set to 0, preventing the perf code to resolve the symbols: ./perf record -e kmem:kmalloc cal [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] ./perf report Overhead Command Shared Object Symbol ........ ....... ............. ........... 40.78% cal [unknown] [.]00000000 31.6% cal [unknown] [.]00000000 The examination of the gathered samples (perf report -D) shows the IP is set to 0 and that the samples are considered as user space samples, while the IP should be set from the registers and the samples should be considered as kernel samples. The fix is to implement perf_arch_fetch_caller_regs for ARM, which fills the necessary registers: ip, lr, sp and cpsr (used to check the user mode property of the samples). Heavily inspired from arch/arm/include/asm/kexec.h. Reported by Sneha Priya on linaro-dev, cf. http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Reported-by: Sneha Priya <sneha.cse@hotmail.com> --- arch/arm/include/asm/perf_event.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)