diff mbox series

[net-next,1/3] net: dsa: don't pass cloned skb's to drivers xmit function

Message ID 20201016200226.23994-2-ceggers@arri.de
State New
Headers show
Series net: dsa: move skb reallocation to dsa_slave_xmit | expand

Commit Message

Christian Eggers Oct. 16, 2020, 8:02 p.m. UTC
Ensure that the skb is not cloned and has enough tail room for the tail
tag. This code will be removed from the drivers in the next commits.

Signed-off-by: Christian Eggers <ceggers@arri.de>
---
 net/dsa/dsa_priv.h |  3 +++
 net/dsa/slave.c    | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

Comments

Vladimir Oltean Oct. 17, 2020, 12:48 a.m. UTC | #1
On Fri, Oct 16, 2020 at 10:02:24PM +0200, Christian Eggers wrote:
> Ensure that the skb is not cloned and has enough tail room for the tail

> tag. This code will be removed from the drivers in the next commits.

> 

> Signed-off-by: Christian Eggers <ceggers@arri.de>

> ---


Does 1588 work for you using this change, or you haven't finished
implementing it yet? If you haven't, I would suggest finishing that
part first.

The post-reallocation skb looks nothing like the one before.

Before:
skb len=68 headroom=2 headlen=68 tailroom=186
mac=(2,14) net=(16,-1) trans=-1
shinfo(txflags=1 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x9d6927ec sw=1 l4=0) proto=0x88f7 pkttype=0 iif=0
dev name=swp2 feat=0x0x0002000000005020
sk family=17 type=3 proto=0

After:
skb len=68 headroom=2 headlen=68 tailroom=186
mac=(2,16) net=(18,-17) trans=1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0

Notice how you've changed shinfo(txflags), among other things.

Which proves that you can't just copy&paste whatever you found in
tag_trailer.c.

I am not yet sure whether there is any helper that can be used instead
of this crazy open-coding. Right now, not having tested anything yet, my
candidates of choice would be pskb_expand_head or __pskb_pull_tail. You
should probably also try to cater here for the potential reallocation
done in the skb_cow_head() of non-tail taggers. Which would lean the
balance towards pskb_expand_head(), I believe.

Also, if the result is going to be longer than ~20 lines of code, I
strongly suggest moving the reallocation to a separate function so you
don't clutter dsa_slave_xmit.

Also, please don't redeclare struct sk_buff *nskb, you don't need to.
Florian Fainelli Oct. 17, 2020, 2:35 a.m. UTC | #2
On 10/16/2020 1:02 PM, Christian Eggers wrote:
> Ensure that the skb is not cloned and has enough tail room for the tail

> tag. This code will be removed from the drivers in the next commits.

> 

> Signed-off-by: Christian Eggers <ceggers@arri.de>

> ---


[snip]

> +	/* We have to pad he packet to the minimum Ethernet frame size,

> +	 * if necessary, before adding the trailer (tail tagging only).

> +	 */

> +	padlen = (skb->len >= ETH_ZLEN) ? 0 : ETH_ZLEN - skb->len;

> +

> +	/* To keep the slave's xmit() methods simple, don't pass cloned skbs to

> +	 * them. Additionally ensure, that suitable room for tail tagging is

> +	 * available.

> +	 */

> +	if (skb_cloned(skb) ||

> +	    (p->tail_tag && skb_tailroom(skb) < (padlen + p->overhead))) {

> +		struct sk_buff *nskb;

> +

> +		nskb = alloc_skb(NET_IP_ALIGN + skb->len +

> +				 padlen + p->overhead, GFP_ATOMIC);

> +		if (!nskb) {

> +			kfree_skb(skb);

> +			return NETDEV_TX_OK;

> +		}

> +		skb_reserve(nskb, NET_IP_ALIGN);

> +

> +		skb_reset_mac_header(nskb);

> +		skb_set_network_header(nskb,

> +				       skb_network_header(skb) - skb->head);

> +		skb_set_transport_header(nskb,

> +					 skb_transport_header(skb) - skb->head);

> +		skb_copy_and_csum_dev(skb, skb_put(nskb, skb->len));

> +		consume_skb(skb);

> +

> +		if (padlen)

> +			skb_put_zero(nskb, padlen);

> +

> +		skb = nskb;

> +	}


Given the low number of tail taggers, maybe this should be a helper 
function that is used by them where applicable? If nothing else you may 
want to sprinkle unlikely() conditions to sort of hing the processor 
that these are unlikely conditions.
-- 
Florian
diff mbox series

Patch

diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 12998bf04e55..975001c625b1 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -77,6 +77,9 @@  struct dsa_slave_priv {
 	/* Copy of CPU port xmit for faster access in slave transmit hot path */
 	struct sk_buff *	(*xmit)(struct sk_buff *skb,
 					struct net_device *dev);
+	/* same for tail_tag and overhead */
+	bool tail_tag;
+	unsigned int overhead;
 
 	struct pcpu_sw_netstats	__percpu *stats64;
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 3bc5ca40c9fb..49a19a3b0736 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -553,6 +553,7 @@  static netdev_tx_t dsa_slave_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct dsa_slave_priv *p = netdev_priv(dev);
 	struct pcpu_sw_netstats *s;
 	struct sk_buff *nskb;
+	int padlen;
 
 	s = this_cpu_ptr(p->stats64);
 	u64_stats_update_begin(&s->syncp);
@@ -567,6 +568,41 @@  static netdev_tx_t dsa_slave_xmit(struct sk_buff *skb, struct net_device *dev)
 	 */
 	dsa_skb_tx_timestamp(p, skb);
 
+	/* We have to pad he packet to the minimum Ethernet frame size,
+	 * if necessary, before adding the trailer (tail tagging only).
+	 */
+	padlen = (skb->len >= ETH_ZLEN) ? 0 : ETH_ZLEN - skb->len;
+
+	/* To keep the slave's xmit() methods simple, don't pass cloned skbs to
+	 * them. Additionally ensure, that suitable room for tail tagging is
+	 * available.
+	 */
+	if (skb_cloned(skb) ||
+	    (p->tail_tag && skb_tailroom(skb) < (padlen + p->overhead))) {
+		struct sk_buff *nskb;
+
+		nskb = alloc_skb(NET_IP_ALIGN + skb->len +
+				 padlen + p->overhead, GFP_ATOMIC);
+		if (!nskb) {
+			kfree_skb(skb);
+			return NETDEV_TX_OK;
+		}
+		skb_reserve(nskb, NET_IP_ALIGN);
+
+		skb_reset_mac_header(nskb);
+		skb_set_network_header(nskb,
+				       skb_network_header(skb) - skb->head);
+		skb_set_transport_header(nskb,
+					 skb_transport_header(skb) - skb->head);
+		skb_copy_and_csum_dev(skb, skb_put(nskb, skb->len));
+		consume_skb(skb);
+
+		if (padlen)
+			skb_put_zero(nskb, padlen);
+
+		skb = nskb;
+	}
+
 	/* Transmit function may have to reallocate the original SKB,
 	 * in which case it must have freed it. Only free it here on error.
 	 */
@@ -1814,6 +1850,8 @@  int dsa_slave_create(struct dsa_port *port)
 	p->dp = port;
 	INIT_LIST_HEAD(&p->mall_tc_list);
 	p->xmit = cpu_dp->tag_ops->xmit;
+	p->tail_tag = cpu_dp->tag_ops->tail_tag;
+	p->overhead = cpu_dp->tag_ops->overhead;
 	port->slave = slave_dev;
 
 	rtnl_lock();