diff mbox series

[RESEND,v2] dt-bindings: net: correct interrupt flags in examples

Message ID 20201026153620.89268-1-krzk@kernel.org
State New
Headers show
Series [RESEND,v2] dt-bindings: net: correct interrupt flags in examples | expand

Commit Message

Krzysztof Kozlowski Oct. 26, 2020, 3:36 p.m. UTC
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt

---

Changes since v1:
1. Add acks
---
 Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +-
 Documentation/devicetree/bindings/net/nfc/nxp-nci.txt  | 2 +-
 Documentation/devicetree/bindings/net/nfc/pn544.txt    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

Comments

Jakub Kicinski Nov. 27, 2020, 4:27 p.m. UTC | #1
On Fri, 27 Nov 2020 10:13:01 +0100 Marc Kleine-Budde wrote:
> On 10/26/20 4:36 PM, Krzysztof Kozlowski wrote:

> > GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.

> > These are simple defines so they could be used in DTS but they will not

> > have the same meaning:

> > 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE

> > 2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

> > 

> > Correct the interrupt flags, assuming the author of the code wanted same

> > logical behavior behind the name "ACTIVE_xxx", this is:

> >   ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

> >   ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

> > 

> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

> > Acked-by: Rob Herring <robh@kernel.org>

> > Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt  

> 

> Jakub, can you queue this patch for net/master?


Sure! Are these correct?

Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Marc Kleine-Budde Nov. 27, 2020, 7:35 p.m. UTC | #2
On 11/27/20 5:27 PM, Jakub Kicinski wrote:
> On Fri, 27 Nov 2020 10:13:01 +0100 Marc Kleine-Budde wrote:
>> On 10/26/20 4:36 PM, Krzysztof Kozlowski wrote:
>>> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
>>> These are simple defines so they could be used in DTS but they will not
>>> have the same meaning:
>>> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
>>> 2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING
>>>
>>> Correct the interrupt flags, assuming the author of the code wanted same
>>> logical behavior behind the name "ACTIVE_xxx", this is:
>>>   ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
>>>   ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>>> Acked-by: Rob Herring <robh@kernel.org>
>>> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt  
>>
>> Jakub, can you queue this patch for net/master?
> 
> Sure! Are these correct?
> 
> Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
> Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")

ACK:
> Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")

Marc
Jakub Kicinski Nov. 28, 2020, 10:49 p.m. UTC | #3
On Fri, 27 Nov 2020 20:35:55 +0100 Marc Kleine-Budde wrote:
> On 11/27/20 5:27 PM, Jakub Kicinski wrote:

> > On Fri, 27 Nov 2020 10:13:01 +0100 Marc Kleine-Budde wrote:  

> >> On 10/26/20 4:36 PM, Krzysztof Kozlowski wrote:  

> >>> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.

> >>> These are simple defines so they could be used in DTS but they will not

> >>> have the same meaning:

> >>> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE

> >>> 2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

> >>>

> >>> Correct the interrupt flags, assuming the author of the code wanted same

> >>> logical behavior behind the name "ACTIVE_xxx", this is:

> >>>   ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW

> >>>   ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

> >>>

> >>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

> >>> Acked-by: Rob Herring <robh@kernel.org>

> >>> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt    

> >>

> >> Jakub, can you queue this patch for net/master?  

> > 

> > Sure! Are these correct?

> > 

> > Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")

> > Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")  

> 

> ACK:


Applied to net and queued for stable, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 3613c2c8f75d..0968b40aef1e 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -33,7 +33,7 @@  tcan4x5x: tcan4x5x@0 {
 		spi-max-frequency = <10000000>;
 		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 GPIO_ACTIVE_LOW>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index cfaf88998918..9e4dc510a40a 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -25,7 +25,7 @@  Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
 		clock-frequency = <100000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <29 GPIO_ACTIVE_HIGH>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
index 92f399ec22b8..2bd82562ce8e 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt
@@ -25,7 +25,7 @@  Example (for ARM-based BeagleBone with PN544 on I2C2):
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 GPIO_ACTIVE_HIGH>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 
 		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;