Message ID | 1399522592-23618-1-git-send-email-sachin.kamat@linaro.org |
---|---|
State | Accepted |
Headers | show |
Hi Sachin, On 08.05.2014 06:16, Sachin Kamat wrote: > Instead of hardcoding the SYSRAM details for each SoC, > pass this information through device tree (DT) and make > the code SoC agnostic. Generic SRAM bindings are used > for achieving this. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > Acked-by: Arnd Bergmann <arnd@arndb.de> > Acked-by: Heiko Stuebner <heiko@sntech.de> > --- > Changes since v2. > * Updated sysram node for Universal C210 board - Thanks to > Tomasz Figa for testing and updating the same. > * Added error handling code. > * Break if matching node found. > * Remove unnecessary error messages. > > This patch is based on linux next (next-20140501) on top of > my Kconfig consolidation patch > http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 > > Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. > --- > arch/arm/Kconfig | 1 + > arch/arm/boot/dts/exynos4210-universal_c210.dts | 15 ++++++ > arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ > arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ > arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ > arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ > arch/arm/mach-exynos/common.h | 1 + > arch/arm/mach-exynos/exynos.c | 64 ----------------------- > arch/arm/mach-exynos/firmware.c | 8 ++- > arch/arm/mach-exynos/include/mach/map.h | 7 --- > arch/arm/mach-exynos/platsmp.c | 56 ++++++++++++++++++-- > 11 files changed, 148 insertions(+), 76 deletions(-) > Looks good, thanks. Reviewed-by: Tomasz Figa <t.figa@samsung.com> -- Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tomasz Figa wrote: > > Hi Sachin, > > On 08.05.2014 06:16, Sachin Kamat wrote: > > Instead of hardcoding the SYSRAM details for each SoC, > > pass this information through device tree (DT) and make > > the code SoC agnostic. Generic SRAM bindings are used > > for achieving this. > > > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > > Acked-by: Arnd Bergmann <arnd@arndb.de> > > Acked-by: Heiko Stuebner <heiko@sntech.de> > > --- > > Changes since v2. > > * Updated sysram node for Universal C210 board - Thanks to > > Tomasz Figa for testing and updating the same. > > * Added error handling code. > > * Break if matching node found. > > * Remove unnecessary error messages. > > > > This patch is based on linux next (next-20140501) on top of > > my Kconfig consolidation patch > > http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 > > > > Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. > > --- > > arch/arm/Kconfig | 1 + > > arch/arm/boot/dts/exynos4210-universal_c210.dts | 15 ++++++ > > arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ > > arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ > > arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ > > arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ > > arch/arm/mach-exynos/common.h | 1 + > > arch/arm/mach-exynos/exynos.c | 64 ---------------------- > - > > arch/arm/mach-exynos/firmware.c | 8 ++- > > arch/arm/mach-exynos/include/mach/map.h | 7 --- > > arch/arm/mach-exynos/platsmp.c | 56 ++++++++++++++++++-- > > 11 files changed, 148 insertions(+), 76 deletions(-) > > > > Looks good, thanks. > > Reviewed-by: Tomasz Figa <t.figa@samsung.com> > Looks good to me but I think, we need to change the name of 'sram' because it can cause some confusing, actually it is not matching _real_ sram area on the SoCs. When we upstreamed regarding patch, I decided the name to use 'SYSRAM', it was called another name in datasheet though. So, I'd like to use 'sysram' instead of 'sram' as we used before. I will change the name when I apply this series in this weekend, if you guys have no objection. Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kukjin, On 09.05.2014 04:14, Kukjin Kim wrote: > Tomasz Figa wrote: >> >> Hi Sachin, >> >> On 08.05.2014 06:16, Sachin Kamat wrote: >>> Instead of hardcoding the SYSRAM details for each SoC, >>> pass this information through device tree (DT) and make >>> the code SoC agnostic. Generic SRAM bindings are used >>> for achieving this. >>> >>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >>> Acked-by: Arnd Bergmann <arnd@arndb.de> >>> Acked-by: Heiko Stuebner <heiko@sntech.de> >>> --- >>> Changes since v2. >>> * Updated sysram node for Universal C210 board - Thanks to >>> Tomasz Figa for testing and updating the same. >>> * Added error handling code. >>> * Break if matching node found. >>> * Remove unnecessary error messages. >>> >>> This patch is based on linux next (next-20140501) on top of >>> my Kconfig consolidation patch >>> http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 >>> >>> Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. >>> --- >>> arch/arm/Kconfig | 1 + >>> arch/arm/boot/dts/exynos4210-universal_c210.dts | 15 ++++++ >>> arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ >>> arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ >>> arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ >>> arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ >>> arch/arm/mach-exynos/common.h | 1 + >>> arch/arm/mach-exynos/exynos.c | 64 > ---------------------- >> - >>> arch/arm/mach-exynos/firmware.c | 8 ++- >>> arch/arm/mach-exynos/include/mach/map.h | 7 --- >>> arch/arm/mach-exynos/platsmp.c | 56 > ++++++++++++++++++-- >>> 11 files changed, 148 insertions(+), 76 deletions(-) >>> >> >> Looks good, thanks. >> >> Reviewed-by: Tomasz Figa <t.figa@samsung.com> >> > Looks good to me but I think, we need to change the name of 'sram' because > it can cause some confusing, actually it is not matching _real_ sram area on > the SoCs. When we upstreamed regarding patch, I decided the name to use > 'SYSRAM', it was called another name in datasheet though. So, I'd like to > use 'sysram' instead of 'sram' as we used before. > > I will change the name when I apply this series in this weekend, if you guys > have no objection. You mean s/sram/sysram/ in compatible strings of Exynos-specific reserved areas? If yes, I'm fine, it might be even better. Just remember to update documentation in patch 2/2 as well. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/09/14 13:49, Tomasz Figa wrote: > Hi Kukjin, > Hi Tomasz, > On 09.05.2014 04:14, Kukjin Kim wrote: >> Tomasz Figa wrote: >>> >>> Hi Sachin, >>> >>> On 08.05.2014 06:16, Sachin Kamat wrote: >>>> Instead of hardcoding the SYSRAM details for each SoC, >>>> pass this information through device tree (DT) and make >>>> the code SoC agnostic. Generic SRAM bindings are used >>>> for achieving this. >>>> >>>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >>>> Acked-by: Arnd Bergmann <arnd@arndb.de> >>>> Acked-by: Heiko Stuebner <heiko@sntech.de> >>>> --- >>>> Changes since v2. >>>> * Updated sysram node for Universal C210 board - Thanks to >>>> Tomasz Figa for testing and updating the same. >>>> * Added error handling code. >>>> * Break if matching node found. >>>> * Remove unnecessary error messages. >>>> >>>> This patch is based on linux next (next-20140501) on top of >>>> my Kconfig consolidation patch >>>> http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 >>>> >>>> Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. >>>> --- >>>> arch/arm/Kconfig | 1 + >>>> arch/arm/boot/dts/exynos4210-universal_c210.dts | 15 ++++++ >>>> arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ >>>> arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ >>>> arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ >>>> arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ >>>> arch/arm/mach-exynos/common.h | 1 + >>>> arch/arm/mach-exynos/exynos.c | 64 >> ---------------------- >>> - >>>> arch/arm/mach-exynos/firmware.c | 8 ++- >>>> arch/arm/mach-exynos/include/mach/map.h | 7 --- >>>> arch/arm/mach-exynos/platsmp.c | 56 >> ++++++++++++++++++-- >>>> 11 files changed, 148 insertions(+), 76 deletions(-) >>>> >>> >>> Looks good, thanks. >>> >>> Reviewed-by: Tomasz Figa <t.figa@samsung.com> >>> >> Looks good to me but I think, we need to change the name of 'sram' >> because >> it can cause some confusing, actually it is not matching _real_ sram >> area on >> the SoCs. When we upstreamed regarding patch, I decided the name to use >> 'SYSRAM', it was called another name in datasheet though. So, I'd like to >> use 'sysram' instead of 'sram' as we used before. >> >> I will change the name when I apply this series in this weekend, if >> you guys >> have no objection. > > You mean s/sram/sysram/ in compatible strings of Exynos-specific > reserved areas? If yes, I'm fine, it might be even better. Just remember > to update documentation in patch 2/2 as well. > Yes, of course ;-) - Kukjin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tomasz Figa wrote: > > Hi Kukjin, > Hi, > On 09.05.2014 04:14, Kukjin Kim wrote: > > Tomasz Figa wrote: > >> > >> Hi Sachin, > >> > >> On 08.05.2014 06:16, Sachin Kamat wrote: > >>> Instead of hardcoding the SYSRAM details for each SoC, > >>> pass this information through device tree (DT) and make > >>> the code SoC agnostic. Generic SRAM bindings are used > >>> for achieving this. > >>> > >>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > >>> Acked-by: Arnd Bergmann <arnd@arndb.de> > >>> Acked-by: Heiko Stuebner <heiko@sntech.de> > >>> --- > >>> Changes since v2. > >>> * Updated sysram node for Universal C210 board - Thanks to > >>> Tomasz Figa for testing and updating the same. > >>> * Added error handling code. > >>> * Break if matching node found. > >>> * Remove unnecessary error messages. > >>> > >>> This patch is based on linux next (next-20140501) on top of > >>> my Kconfig consolidation patch > >>> http://comments.gmane.org/gmane.linux.kernel.samsung-soc/28642 > >>> > >>> Tested on 4210/4412 Origen, 5250/5420 Arndale and SMDK5420 boards. > >>> --- > >>> arch/arm/Kconfig | 1 + > >>> arch/arm/boot/dts/exynos4210-universal_c210.dts | 15 ++++++ > >>> arch/arm/boot/dts/exynos4210.dtsi | 18 +++++++ > >>> arch/arm/boot/dts/exynos4x12.dtsi | 18 +++++++ > >>> arch/arm/boot/dts/exynos5250.dtsi | 18 +++++++ > >>> arch/arm/boot/dts/exynos5420.dtsi | 18 +++++++ > >>> arch/arm/mach-exynos/common.h | 1 + > >>> arch/arm/mach-exynos/exynos.c | 64 > > ---------------------- > >> - > >>> arch/arm/mach-exynos/firmware.c | 8 ++- > >>> arch/arm/mach-exynos/include/mach/map.h | 7 --- > >>> arch/arm/mach-exynos/platsmp.c | 56 > > ++++++++++++++++++-- > >>> 11 files changed, 148 insertions(+), 76 deletions(-) > >>> > >> > >> Looks good, thanks. > >> > >> Reviewed-by: Tomasz Figa <t.figa@samsung.com> > >> > > Looks good to me but I think, we need to change the name of 'sram' > because > > it can cause some confusing, actually it is not matching _real_ sram > area on > > the SoCs. When we upstreamed regarding patch, I decided the name to use > > 'SYSRAM', it was called another name in datasheet though. So, I'd like > to > > use 'sysram' instead of 'sram' as we used before. > > > > I will change the name when I apply this series in this weekend, if you > guys > > have no objection. > > You mean s/sram/sysram/ in compatible strings of Exynos-specific > reserved areas? If yes, I'm fine, it might be even better. Just remember > to update documentation in patch 2/2 as well. > Done. If any problems in my tree, please let me know. Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Kukjin, On Tue, 2014-05-13 at 12:12 +0900, Kukjin Kim wrote: > Tomasz Figa wrote: > > You mean s/sram/sysram/ in compatible strings of Exynos-specific > > reserved areas? If yes, I'm fine, it might be even better. Just remember > > to update documentation in patch 2/2 as well. > > > Done. If any problems in my tree, please let me know. It seems this one just hit linux-next (in next-20140513) as "ARM: EXYNOS: Map SYSRAM through generic DT bindings". Its commit now contains this hunk: --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -843,6 +843,7 @@ config ARCH_EXYNOS select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_MEMORY_H select SPARSE_IRQ + select SYSRAM select USE_OF help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) But there's no Kconfig symbol SYSRAM. However, there is a Kconfig symbol SRAM. Did you perhaps do one s/sram/sysram/ too many on the original patch? Paul Bolle -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/13/2014 03:37 PM, Paul Bolle wrote: > Kukjin, > > On Tue, 2014-05-13 at 12:12 +0900, Kukjin Kim wrote: >> Tomasz Figa wrote: >>> You mean s/sram/sysram/ in compatible strings of Exynos-specific >>> reserved areas? If yes, I'm fine, it might be even better. Just remember >>> to update documentation in patch 2/2 as well. >>> >> Done. If any problems in my tree, please let me know. > > It seems this one just hit linux-next (in next-20140513) as "ARM: > EXYNOS: Map SYSRAM through generic DT bindings". Its commit now contains > this hunk: > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -843,6 +843,7 @@ config ARCH_EXYNOS > select HAVE_S3C_RTC if RTC_CLASS > select NEED_MACH_MEMORY_H > select SPARSE_IRQ > + select SYSRAM > select USE_OF > help > Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) > > But there's no Kconfig symbol SYSRAM. However, there is a Kconfig symbol > SRAM. Did you perhaps do one s/sram/sysram/ too many on the original > patch? > Also the compatible string name should be 'mmio-sram' on the DTS files. > > Paul Bolle > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
Tushar Behera wrote: > > On 05/13/2014 03:37 PM, Paul Bolle wrote: > > Kukjin, > > > > On Tue, 2014-05-13 at 12:12 +0900, Kukjin Kim wrote: > >> Tomasz Figa wrote: > >>> You mean s/sram/sysram/ in compatible strings of Exynos-specific > >>> reserved areas? If yes, I'm fine, it might be even better. Just > remember > >>> to update documentation in patch 2/2 as well. > >>> > >> Done. If any problems in my tree, please let me know. > > > > It seems this one just hit linux-next (in next-20140513) as "ARM: > > EXYNOS: Map SYSRAM through generic DT bindings". Its commit now contains > > this hunk: > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -843,6 +843,7 @@ config ARCH_EXYNOS > > select HAVE_S3C_RTC if RTC_CLASS > > select NEED_MACH_MEMORY_H > > select SPARSE_IRQ > > + select SYSRAM > > select USE_OF > > help > > Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) > > > > But there's no Kconfig symbol SYSRAM. However, there is a Kconfig symbol > > SRAM. Did you perhaps do one s/sram/sysram/ too many on the original > > patch? > > > > Also the compatible string name should be 'mmio-sram' on the DTS files. > Paul and Tushar, Thanks for the pointing out. Let me fix them, config name and compatible string. - Kukjin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a6aaaad19b1a..f66ea9453df9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -855,6 +855,7 @@ config ARCH_EXYNOS select S5P_DEV_MFC select SAMSUNG_DMADEV select SPARSE_IRQ + select SRAM select USE_OF help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..a62c0ff25917 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,21 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sram@02020000 { + smp-sram@0 { + status = "disabled"; + }; + + smp-sram@5000 { + compatible = "samsung,exynos4210-sram"; + reg = <0x5000 0x1000>; + }; + + smp-sram@1f000 { + status = "disabled"; + }; + }; + mct@10050000 { compatible = "none"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..d3d727b0c263 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,24 @@ pinctrl2 = &pinctrl_2; }; + sram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sram"; + reg = <0x0 0x1000>; + }; + + smp-sram@1f000 { + compatible = "samsung,exynos4210-sram-ns"; + reg = <0x1f000 0x1000>; + }; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..75fb3e7e3999 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,24 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sram"; + reg = <0x0 0x1000>; + }; + + smp-sram@2f000 { + compatible = "samsung,exynos4210-sram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..8d724d56a5c6 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,24 @@ }; }; + sram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sram"; + reg = <0x0 0x1000>; + }; + + smp-sram@2f000 { + compatible = "samsung,exynos4210-sram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..ff496adfabde 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -110,6 +110,24 @@ }; }; + sram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sram@0 { + compatible = "samsung,exynos4210-sram"; + reg = <0x0 0x1000>; + }; + + smp-sram@53000 { + compatible = "samsung,exynos4210-sram-ns"; + reg = <0x53000 0x1000>; + }; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 9ef3f83efaff..47cbab0f008e 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -18,6 +18,7 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; +extern void __iomem *sram_ns_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 77293d39dfc9..556d148e6413 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -280,20 +230,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 932129ef26c6..dcd99ed81452 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,6 +18,7 @@ #include <mach/map.h> +#include "common.h" #include "smc.h" static int exynos_do_idle(void) @@ -34,7 +35,12 @@ static int exynos_cpu_boot(int cpu) static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + void __iomem *boot_reg; + + if (!sram_ns_base_addr) + return -ENODEV; + + boot_reg = sram_ns_base_addr + 0x1c + 4*cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 03e5e9f94705..3611241ea296 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,6 +20,7 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -33,11 +34,33 @@ extern void exynos4_secondary_startup(void); +static void __iomem *sram_base_addr; +void __iomem *sram_ns_base_addr; + +static void __init exynos_smp_prepare_sram(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sram") { + if (!of_device_is_available(node)) + continue; + sram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sram-ns") { + if (!of_device_is_available(node)) + continue; + sram_ns_base_addr = of_iomap(node, 0); + break; + } +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return S5P_INFORM5; - return S5P_VA_SYSRAM; + return sram_base_addr; } static inline void __iomem *cpu_boot_reg(int cpu) @@ -45,6 +68,8 @@ static inline void __iomem *cpu_boot_reg(int cpu) void __iomem *boot_reg; boot_reg = cpu_boot_reg_base(); + if (!boot_reg) + return ERR_PTR(-ENODEV); if (soc_is_exynos4412()) boot_reg += 4*cpu; else if (soc_is_exynos5420()) @@ -90,6 +115,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); + int ret = -ENOSYS; /* * Set synchronisation state between this boot processor @@ -146,8 +172,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } call_firmware_op(cpu_boot, phys_cpu); @@ -163,9 +199,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ +fail: spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return pen_release != -1 ? ret : 0; } /* @@ -205,6 +242,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); + exynos_smp_prepare_sram(); + /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits @@ -217,12 +256,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; ++i) { unsigned long phys_cpu; unsigned long boot_addr; + int ret; phys_cpu = cpu_logical_map(i); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + break; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) + break; __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } }