@@ -73,13 +73,13 @@
* 14-SFP_TX_DISABLE
* 15-SFP_MOD_DEF0
*/
- pcie2_0_clkreq {
+ pcie2-0-clkreq-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_LOW>;
input;
line-name = "pcie2.0-clkreq";
};
- pcie2_0_w_disable {
+ pcie2-0-w-disable-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_LOW>;
output-low;
@@ -141,31 +141,31 @@
#gpio-cells = <2>;
reg = <0x20>;
- pcie1_0_clkreq {
+ pcie1-0-clkreq-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_LOW>;
input;
line-name = "pcie1.0-clkreq";
};
- pcie1_0_w_disable {
+ pcie1-0-w-disable-hog {
gpio-hog;
gpios = <3 GPIO_ACTIVE_LOW>;
output-low;
line-name = "pcie1.0-w-disable";
};
- usb3_ilimit {
+ usb3-ilimit-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
input;
line-name = "usb3-current-limit";
};
- usb3_power {
+ usb3-power-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb3-power";
};
- m2_devslp {
+ m2-devslp-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-low;
@@ -166,19 +166,19 @@
interrupt-controller;
#interrupt-cells = <2>;
- board_rev_bit_0 {
+ board-rev-bit-0-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_LOW>;
input;
line-name = "board-rev-0";
};
- board_rev_bit_1 {
+ board-rev-bit-1-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_LOW>;
input;
line-name = "board-rev-1";
};
- usb3_ilimit {
+ usb3-ilimit-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
input;
The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/armada-388-clearfog.dts | 4 ++-- arch/arm/boot/dts/armada-388-clearfog.dtsi | 10 +++++----- arch/arm/boot/dts/armada-388-helios4.dts | 6 +++--- 3 files changed, 10 insertions(+), 10 deletions(-)