@@ -54,6 +54,173 @@ struct nandi_controller {
/* 'page_buf' */
};
+/* ONFI define 6 timing modes */
+#define ST_NAND_ONFI_TIMING_MODES 6
+
+/*
+ * ONFI NAND Timing Mode Specifications
+ *
+ * Note, 'tR' field (maximum page read time) is extracted from the ONFI
+ * parameter page during device probe.
+ */
+const struct nand_timing_spec st_nand_onfi_timing_specs[] = {
+ /*
+ * ONFI Timing Mode '0' (supported on all ONFI compliant devices)
+ */
+ [0] = {
+ .tCLS = 50,
+ .tCS = 70,
+ .tALS = 50,
+ .tDS = 40,
+ .tWP = 50,
+ .tCLH = 20,
+ .tCH = 20,
+ .tALH = 20,
+ .tDH = 20,
+ .tWB = 200,
+ .tWH = 30,
+ .tWC = 100,
+ .tRP = 50,
+ .tREH = 30,
+ .tRC = 100,
+ .tREA = 40,
+ .tRHOH = 0,
+ .tCEA = 100,
+ .tCOH = 0,
+ .tCHZ = 100,
+ },
+
+ /*
+ * ONFI Timing Mode '1'
+ */
+ [1] = {
+ .tCLS = 25,
+ .tCS = 35,
+ .tALS = 25,
+ .tDS = 20,
+ .tWP = 25,
+ .tCLH = 10,
+ .tCH = 10,
+ .tALH = 10,
+ .tDH = 10,
+ .tWB = 100,
+ .tWH = 15,
+ .tWC = 45,
+ .tRP = 25,
+ .tREH = 15,
+ .tRC = 50,
+ .tREA = 30,
+ .tRHOH = 15,
+ .tCEA = 45,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '2'
+ */
+ [2] = {
+ .tCLS = 15,
+ .tCS = 25,
+ .tALS = 15,
+ .tDS = 15,
+ .tWP = 17,
+ .tCLH = 10,
+ .tCH = 10,
+ .tALH = 10,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 15,
+ .tWC = 35,
+ .tRP = 17,
+ .tREH = 16,
+ .tRC = 35,
+ .tREA = 25,
+ .tRHOH = 15,
+ .tCEA = 30,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '3'
+ */
+ [3] = {
+ .tCLS = 10,
+ .tCS = 25,
+ .tALS = 10,
+ .tDS = 10,
+ .tWP = 15,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 10,
+ .tWC = 30,
+ .tRP = 15,
+ .tREH = 10,
+ .tRC = 30,
+ .tREA = 20,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '4' (EDO only)
+ */
+ [4] = {
+ .tCLS = 10,
+ .tCS = 20,
+ .tALS = 10,
+ .tDS = 10,
+ .tWP = 12,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 10,
+ .tWC = 25,
+ .tRP = 12,
+ .tREH = 10,
+ .tRC = 25,
+ .tREA = 20,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 30,
+ },
+
+ /*
+ * ONFI Timing Mode '5' (EDO only)
+ */
+ [5] = {
+ .tCLS = 10,
+ .tCS = 15,
+ .tALS = 10,
+ .tDS = 7,
+ .tWP = 10,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 7,
+ .tWC = 20,
+ .tRP = 10,
+ .tREH = 7,
+ .tRC = 20,
+ .tREA = 16,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 30,
+ }
+};
+
static int remap_named_resource(struct platform_device *pdev,
char *name,
void __iomem **io_ptr)
@@ -299,4 +299,34 @@
#define FLEX_ADDR_ADD8_VALID (0x1 << 30)
#define FLEX_ADDR_CSN (0x1 << 31)
+/*
+ * NAND Device Timing Specification
+ *
+ * All values in nano seconds, except where specified.
+ */
+struct nand_timing_spec {
+ int tR; /* Max Page Read delay [us]*/
+ int tCLS; /* Min CLE setup time */
+ int tCS; /* Min CE setup time */
+ int tALS; /* Min ALE setup time */
+ int tDS; /* Min Data setup time */
+ int tWP; /* Min WE pulse width */
+ int tCLH; /* Min CLE hold time */
+ int tCH; /* Min CE hold time */
+ int tALH; /* Min ALE hold time */
+ int tDH; /* Min Data hold time */
+ int tWB; /* Max WE high to busy */
+ int tWH; /* Min WE hold time */
+ int tWC; /* Min Write cycle time */
+ int tRP; /* Min RE pulse width */
+ int tREH; /* Min RE high hold time */
+ int tRC; /* Min Read cycle time */
+ int tREA; /* Max Read access time */
+ int tRHOH; /* Min RE high to output hold */
+ int tCEA; /* Max CE access time */
+ int tCOH; /* Min CE high to output hold */
+ int tCHZ; /* Max CE high to output high Z */
+ int tCSD; /* Min CE high to ALE/CLE don't care */
+};
+
#endif /* STM_NANDC_REGS_H */
This patch adds a new structure, 'nand_timing_spec', to capture the A/C timing characteristics of NAND devices. Unfortunately, there is no universally accepted standard for defining NAND timing parameters. Different datasheets list different sets of parameters. The ONFI standard gets close, but support is missing from some of the major NAND manufacturers (e.g. Samsung, Toshiba). Here we have followed broadly the ONFI timing definitions. We also provide specifications for the six standard ONFI timing modes, in terms of the new nand_timing_spec structure. This will allow fully automated configuration of the timing registers when using ONFI-compliant NAND. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/mtd/nand/stm_nand_bch.c | 167 +++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/stm_nand_regs.h | 30 +++++++ 2 files changed, 197 insertions(+)