@@ -23,9 +23,12 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/input/pixcir_ts.h>
#include <linux/gpio.h>
+#define PIXCIR_MAX_SLOTS 2
+
struct pixcir_i2c_ts_data {
struct i2c_client *client;
struct input_dev *input;
@@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data {
bool exiting;
};
-static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
+struct pixcir_touch {
+ int x;
+ int y;
+};
+
+struct pixcir_report_data {
+ int num_touches;
+ struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
+};
+
+static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
+ struct pixcir_report_data *report)
{
- struct pixcir_i2c_ts_data *tsdata = data;
u8 rdbuf[10], wrbuf[1] = { 0 };
+ u8 *bufptr;
u8 touch;
- int ret;
+ int ret, i;
+
+ memset(report, 0, sizeof(struct pixcir_report_data));
ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
if (ret != sizeof(wrbuf)) {
@@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
return;
}
- touch = rdbuf[0];
- if (touch) {
- u16 posx1 = (rdbuf[3] << 8) | rdbuf[2];
- u16 posy1 = (rdbuf[5] << 8) | rdbuf[4];
- u16 posx2 = (rdbuf[7] << 8) | rdbuf[6];
- u16 posy2 = (rdbuf[9] << 8) | rdbuf[8];
-
- input_report_key(tsdata->input, BTN_TOUCH, 1);
- input_report_abs(tsdata->input, ABS_X, posx1);
- input_report_abs(tsdata->input, ABS_Y, posy1);
-
- input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1);
- input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1);
- input_mt_sync(tsdata->input);
-
- if (touch == 2) {
- input_report_abs(tsdata->input,
- ABS_MT_POSITION_X, posx2);
- input_report_abs(tsdata->input,
- ABS_MT_POSITION_Y, posy2);
- input_mt_sync(tsdata->input);
- }
- } else {
- input_report_key(tsdata->input, BTN_TOUCH, 0);
+ touch = rdbuf[0] & 0x7;
+ if (touch > PIXCIR_MAX_SLOTS)
+ touch = PIXCIR_MAX_SLOTS;
+
+ report->num_touches = touch;
+ bufptr = &rdbuf[2];
+
+ for (i = 0; i < touch; i++) {
+ report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
+ report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+
+ bufptr = &bufptr[4];
}
+}
+
+static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
+ struct pixcir_report_data *report)
+{
+ struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
+ int slots[PIXCIR_MAX_SLOTS];
+ struct pixcir_touch *touch;
+ int n, i, slot;
+ struct device *dev = &ts->client->dev;
- input_sync(tsdata->input);
+ n = report->num_touches;
+ if (n > PIXCIR_MAX_SLOTS)
+ n = PIXCIR_MAX_SLOTS;
+
+ for (i = 0; i < n; i++) {
+ touch = &report->touches[i];
+ pos[i].x = touch->x;
+ pos[i].y = touch->y;
+ }
+
+ input_mt_assign_slots(ts->input, slots, pos, n);
+
+ for (i = 0; i < n; i++) {
+ touch = &report->touches[i];
+ slot = slots[i];
+
+ input_mt_slot(ts->input, slot);
+ input_mt_report_slot_state(ts->input,
+ MT_TOOL_FINGER, true);
+
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x);
+ input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y);
+
+ dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
+ i, slot, touch->x, touch->y);
+ }
+
+ input_mt_sync_frame(ts->input);
+ input_sync(ts->input);
}
static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
{
struct pixcir_i2c_ts_data *tsdata = dev_id;
const struct pixcir_ts_platform_data *pdata = tsdata->chip;
+ struct pixcir_report_data report;
while (!tsdata->exiting) {
- pixcir_ts_poscheck(tsdata);
-
- if (gpio_get_value(pdata->gpio_attb))
+ /* parse packet */
+ pixcir_ts_parse(tsdata, &report);
+
+ /* report it */
+ pixcir_ts_report(tsdata, &report);
+
+ if (gpio_get_value(pdata->gpio_attb)) {
+ if (report.num_touches) {
+ /*
+ * Last report with no finger up?
+ * Do it now then.
+ */
+ input_mt_sync_frame(tsdata->input);
+ input_sync(tsdata->input);
+ }
break;
+ }
msleep(20);
}
@@ -337,6 +393,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
+ error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(dev, "Error initializing Multi-Touch slots\n");
+ return error;
+ }
+
input_set_drvdata(input, tsdata);
error = devm_gpio_request_one(dev, pdata->gpio_attb,
Switch to using the Type-B Multi-Touch protocol. Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++-------- 1 file changed, 94 insertions(+), 31 deletions(-)