| Message ID | 20200929171026.30551-1-khsieh@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | drm/msm/dp: add voltage corners voting support base on dp link rate | expand |
Quoting Kuogee Hsieh (2020-09-29 10:10:26) > Set link rate by using OPP set rate api so that CX level will be set > accordingly base on the link rate. s/base/based/ > > Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> > --- > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c > index 2e3e1917351f..e1595d829e04 100644 > --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c > @@ -1849,6 +1853,21 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, > return ERR_PTR(-ENOMEM); > } > > + ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link"); > + > + if (IS_ERR(ctrl->opp_table)) { > + dev_err(dev, "invalid DP OPP table in device tree\n"); > + ctrl->opp_table = NULL; > + } else { > + /* OPP table is optional */ > + ret = dev_pm_opp_of_add_table(dev); > + if (ret && ret != -ENODEV) { > + dev_err(dev, "add DP OPP table\n"); This is debug noise right? > + dev_pm_opp_put_clkname(ctrl->opp_table); > + ctrl->opp_table = NULL; > + } > + } > + > init_completion(&ctrl->idle_comp); > init_completion(&ctrl->video_comp); > > @@ -1864,6 +1883,18 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, > return &ctrl->dp_ctrl; > } > > -void dp_ctrl_put(struct dp_ctrl *dp_ctrl) > +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl) > { > + struct dp_ctrl_private *ctrl; > + > + if (!dp_ctrl) Can this happen? > + return; > + > + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl); > + > + if (ctrl->opp_table != NULL) { This is usually written as if (ctrl->opp_table) > + dev_pm_opp_of_remove_table(dev); > + dev_pm_opp_put_clkname(ctrl->opp_table); > + ctrl->opp_table = NULL; > + } > } > diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h > index f60ba93c8678..19b412a93e02 100644 > --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h > +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h > @@ -31,6 +31,6 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, > struct dp_panel *panel, struct drm_dp_aux *aux, > struct dp_power *power, struct dp_catalog *catalog, > struct dp_parser *parser); > -void dp_ctrl_put(struct dp_ctrl *dp_ctrl); > +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl); Is 'dev' not inside 'dp_ctrl'? > > #endif /* _DP_CTRL_H_ */ > diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c > index 17c1fc6a2d44..3d75bf09e38f 100644 > --- a/drivers/gpu/drm/msm/dp/dp_power.c > +++ b/drivers/gpu/drm/msm/dp/dp_power.c > @@ -8,12 +8,14 @@ > #include <linux/clk.h> > #include <linux/clk-provider.h> > #include <linux/regulator/consumer.h> > +#include <linux/pm_opp.h> > #include "dp_power.h" > #include "msm_drv.h" > > struct dp_power_private { > struct dp_parser *parser; > struct platform_device *pdev; > + struct device *dev; > struct clk *link_clk_src; > struct clk *pixel_provider; > struct clk *link_provider; > @@ -148,18 +150,49 @@ static int dp_power_clk_deinit(struct dp_power_private *power) > return 0; > } > > +static int dp_power_clk_set_link_rate(struct dp_power_private *power, > + struct dss_clk *clk_arry, int num_clk, int enable) > +{ > + u32 rate; > + int i, rc = 0; > + > + for (i = 0; i < num_clk; i++) { > + if (clk_arry[i].clk) { > + if (clk_arry[i].type == DSS_CLK_PCLK) { > + if (enable) > + rate = clk_arry[i].rate; > + else > + rate = 0; > + > + rc = dev_pm_opp_set_rate(power->dev, rate); Why do we keep going if rc is non-zero? > + } > + > + } > + } > + return rc; > +} > + > static int dp_power_clk_set_rate(struct dp_power_private *power, > enum dp_pm_type module, bool enable) > { > int rc = 0; > struct dss_module_power *mp = &power->parser->mp[module]; > > - if (enable) { > - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); > + if (module == DP_CTRL_PM) { > + rc = dp_power_clk_set_link_rate(power, mp->clk_config, mp->num_clk, enable); > if (rc) { > - DRM_ERROR("failed to set clks rate.\n"); > + DRM_ERROR("failed to set link clks rate.\n"); > return rc; > } > + } else { > + > + if (enable) { > + rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); > + if (rc) { > + DRM_ERROR("failed to set clks rate.\n"); Not sure we need the period on these error messages. > + return rc; > + } > + } > } > > rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable); > > base-commit: 3c0f462da069af12211901ddf26f7e16e6951d9b > prerequisite-patch-id: a109eaf08147f50149ad661a58122b6745a52445 Can you rebase this on Rob's msm-next tree (https://gitlab.freedesktop.org/drm/msm.git) and test? It doesn't apply for me because I have the dp phy patch from there.
On 9/30/2020 1:54 PM, Stephen Boyd wrote: > Quoting Kuogee Hsieh (2020-09-29 10:10:26) >> Set link rate by using OPP set rate api so that CX level will be set >> accordingly base on the link rate. > > s/base/based/ > >> >> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> >> --- >> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> index 2e3e1917351f..e1595d829e04 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c >> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c >> @@ -1849,6 +1853,21 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, >> return ERR_PTR(-ENOMEM); >> } >> >> + ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link"); I see that downstream has multiple DP clocks which end up voting on CX, we don't have a way of associating multiple OPP tables with a device upstream, so whats usually done is (assuming all the clocks get scaled in lock step, which I assume is the case here) we pick the clock with the 'highest' CX requirement and associate that with the OPP table. I haven't looked but I am hoping thats how we have decided to associate "ctrl_link" clock here? >> + >> + if (IS_ERR(ctrl->opp_table)) { >> + dev_err(dev, "invalid DP OPP table in device tree\n"); >> + ctrl->opp_table = NULL; >> + } else { >> + /* OPP table is optional */ >> + ret = dev_pm_opp_of_add_table(dev); >> + if (ret && ret != -ENODEV) { >> + dev_err(dev, "add DP OPP table\n"); > > This is debug noise right? > >> + dev_pm_opp_put_clkname(ctrl->opp_table); >> + ctrl->opp_table = NULL; >> + } >> + } >> + >> init_completion(&ctrl->idle_comp); >> init_completion(&ctrl->video_comp); >> >> @@ -1864,6 +1883,18 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, >> return &ctrl->dp_ctrl; >> } >> >> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl) >> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl) >> { >> + struct dp_ctrl_private *ctrl; >> + >> + if (!dp_ctrl) > > Can this happen? > >> + return; >> + >> + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl); >> + >> + if (ctrl->opp_table != NULL) { > > This is usually written as > > if (ctrl->opp_table) > >> + dev_pm_opp_of_remove_table(dev); >> + dev_pm_opp_put_clkname(ctrl->opp_table); >> + ctrl->opp_table = NULL; >> + } >> } >> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h >> index f60ba93c8678..19b412a93e02 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h >> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h >> @@ -31,6 +31,6 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, >> struct dp_panel *panel, struct drm_dp_aux *aux, >> struct dp_power *power, struct dp_catalog *catalog, >> struct dp_parser *parser); >> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl); >> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl); > > Is 'dev' not inside 'dp_ctrl'? > >> >> #endif /* _DP_CTRL_H_ */ >> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c >> index 17c1fc6a2d44..3d75bf09e38f 100644 >> --- a/drivers/gpu/drm/msm/dp/dp_power.c >> +++ b/drivers/gpu/drm/msm/dp/dp_power.c >> @@ -8,12 +8,14 @@ >> #include <linux/clk.h> >> #include <linux/clk-provider.h> >> #include <linux/regulator/consumer.h> >> +#include <linux/pm_opp.h> >> #include "dp_power.h" >> #include "msm_drv.h" >> >> struct dp_power_private { >> struct dp_parser *parser; >> struct platform_device *pdev; >> + struct device *dev; >> struct clk *link_clk_src; >> struct clk *pixel_provider; >> struct clk *link_provider; >> @@ -148,18 +150,49 @@ static int dp_power_clk_deinit(struct dp_power_private *power) >> return 0; >> } >> >> +static int dp_power_clk_set_link_rate(struct dp_power_private *power, >> + struct dss_clk *clk_arry, int num_clk, int enable) >> +{ >> + u32 rate; >> + int i, rc = 0; >> + >> + for (i = 0; i < num_clk; i++) { >> + if (clk_arry[i].clk) { >> + if (clk_arry[i].type == DSS_CLK_PCLK) { >> + if (enable) >> + rate = clk_arry[i].rate; >> + else >> + rate = 0; >> + >> + rc = dev_pm_opp_set_rate(power->dev, rate); > > Why do we keep going if rc is non-zero? > >> + } >> + >> + } >> + } >> + return rc; >> +} >> + >> static int dp_power_clk_set_rate(struct dp_power_private *power, >> enum dp_pm_type module, bool enable) >> { >> int rc = 0; >> struct dss_module_power *mp = &power->parser->mp[module]; >> >> - if (enable) { >> - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); >> + if (module == DP_CTRL_PM) { >> + rc = dp_power_clk_set_link_rate(power, mp->clk_config, mp->num_clk, enable); >> if (rc) { >> - DRM_ERROR("failed to set clks rate.\n"); >> + DRM_ERROR("failed to set link clks rate.\n"); >> return rc; >> } >> + } else { >> + >> + if (enable) { >> + rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); >> + if (rc) { >> + DRM_ERROR("failed to set clks rate.\n"); > > Not sure we need the period on these error messages. > >> + return rc; >> + } >> + } >> } >> >> rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable); >> >> base-commit: 3c0f462da069af12211901ddf26f7e16e6951d9b >> prerequisite-patch-id: a109eaf08147f50149ad661a58122b6745a52445 > > Can you rebase this on Rob's msm-next tree > (https://gitlab.freedesktop.org/drm/msm.git) and test? It doesn't apply > for me because I have the dp phy patch from there. > -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On 2020-09-30 09:24, Rajendra Nayak wrote: > On 9/30/2020 1:54 PM, Stephen Boyd wrote: >> Quoting Kuogee Hsieh (2020-09-29 10:10:26) >>> Set link rate by using OPP set rate api so that CX level will be set >>> accordingly base on the link rate. >> >> s/base/based/ >> >>> >>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> >>> --- >>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c >>> b/drivers/gpu/drm/msm/dp/dp_ctrl.c >>> index 2e3e1917351f..e1595d829e04 100644 >>> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c >>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c >>> @@ -1849,6 +1853,21 @@ struct dp_ctrl *dp_ctrl_get(struct device >>> *dev, struct dp_link *link, >>> return ERR_PTR(-ENOMEM); >>> } >>> + ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link"); > > I see that downstream has multiple DP clocks which end up voting on > CX, we don't have a > way of associating multiple OPP tables with a device upstream, so > whats usually done is > (assuming all the clocks get scaled in lock step, which I assume is > the case here) we pick > the clock with the 'highest' CX requirement and associate that with > the OPP table. > I haven't looked but I am hoping thats how we have decided to > associate "ctrl_link" clock > here? > yes, only ctrl_link use dev_pm_opp_set_rate() to set rate. >>> + >>> + if (IS_ERR(ctrl->opp_table)) { >>> + dev_err(dev, "invalid DP OPP table in device >>> tree\n"); >>> + ctrl->opp_table = NULL; >>> + } else { >>> + /* OPP table is optional */ >>> + ret = dev_pm_opp_of_add_table(dev); >>> + if (ret && ret != -ENODEV) { >>> + dev_err(dev, "add DP OPP table\n"); >> >> This is debug noise right? >> >>> + dev_pm_opp_put_clkname(ctrl->opp_table); >>> + ctrl->opp_table = NULL; >>> + } >>> + } >>> + >>> init_completion(&ctrl->idle_comp); >>> init_completion(&ctrl->video_comp); >>> @@ -1864,6 +1883,18 @@ struct dp_ctrl *dp_ctrl_get(struct device >>> *dev, struct dp_link *link, >>> return &ctrl->dp_ctrl; >>> } >>> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl) >>> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl) >>> { >>> + struct dp_ctrl_private *ctrl; >>> + >>> + if (!dp_ctrl) >> >> Can this happen? >> >>> + return; >>> + >>> + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, >>> dp_ctrl); >>> + >>> + if (ctrl->opp_table != NULL) { >> >> This is usually written as >> >> if (ctrl->opp_table) >> >>> + dev_pm_opp_of_remove_table(dev); >>> + dev_pm_opp_put_clkname(ctrl->opp_table); >>> + ctrl->opp_table = NULL; >>> + } >>> } >>> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h >>> b/drivers/gpu/drm/msm/dp/dp_ctrl.h >>> index f60ba93c8678..19b412a93e02 100644 >>> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h >>> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h >>> @@ -31,6 +31,6 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, >>> struct dp_link *link, >>> struct dp_panel *panel, struct drm_dp_aux >>> *aux, >>> struct dp_power *power, struct dp_catalog >>> *catalog, >>> struct dp_parser *parser); >>> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl); >>> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl); >> >> Is 'dev' not inside 'dp_ctrl'? >> >>> #endif /* _DP_CTRL_H_ */ >>> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c >>> b/drivers/gpu/drm/msm/dp/dp_power.c >>> index 17c1fc6a2d44..3d75bf09e38f 100644 >>> --- a/drivers/gpu/drm/msm/dp/dp_power.c >>> +++ b/drivers/gpu/drm/msm/dp/dp_power.c >>> @@ -8,12 +8,14 @@ >>> #include <linux/clk.h> >>> #include <linux/clk-provider.h> >>> #include <linux/regulator/consumer.h> >>> +#include <linux/pm_opp.h> >>> #include "dp_power.h" >>> #include "msm_drv.h" >>> struct dp_power_private { >>> struct dp_parser *parser; >>> struct platform_device *pdev; >>> + struct device *dev; >>> struct clk *link_clk_src; >>> struct clk *pixel_provider; >>> struct clk *link_provider; >>> @@ -148,18 +150,49 @@ static int dp_power_clk_deinit(struct >>> dp_power_private *power) >>> return 0; >>> } >>> +static int dp_power_clk_set_link_rate(struct dp_power_private >>> *power, >>> + struct dss_clk *clk_arry, int num_clk, int >>> enable) >>> +{ >>> + u32 rate; >>> + int i, rc = 0; >>> + >>> + for (i = 0; i < num_clk; i++) { >>> + if (clk_arry[i].clk) { >>> + if (clk_arry[i].type == DSS_CLK_PCLK) { >>> + if (enable) >>> + rate = clk_arry[i].rate; >>> + else >>> + rate = 0; >>> + >>> + rc = dev_pm_opp_set_rate(power->dev, >>> rate); >> >> Why do we keep going if rc is non-zero? >> >>> + } >>> + >>> + } >>> + } >>> + return rc; >>> +} >>> + >>> static int dp_power_clk_set_rate(struct dp_power_private *power, >>> enum dp_pm_type module, bool enable) >>> { >>> int rc = 0; >>> struct dss_module_power *mp = &power->parser->mp[module]; >>> - if (enable) { >>> - rc = msm_dss_clk_set_rate(mp->clk_config, >>> mp->num_clk); >>> + if (module == DP_CTRL_PM) { >>> + rc = dp_power_clk_set_link_rate(power, >>> mp->clk_config, mp->num_clk, enable); >>> if (rc) { >>> - DRM_ERROR("failed to set clks rate.\n"); >>> + DRM_ERROR("failed to set link clks rate.\n"); >>> return rc; >>> } >>> + } else { >>> + >>> + if (enable) { >>> + rc = msm_dss_clk_set_rate(mp->clk_config, >>> mp->num_clk); >>> + if (rc) { >>> + DRM_ERROR("failed to set clks >>> rate.\n"); >> >> Not sure we need the period on these error messages. >> >>> + return rc; >>> + } >>> + } >>> } >>> rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, >>> enable); >>> >>> base-commit: 3c0f462da069af12211901ddf26f7e16e6951d9b >>> prerequisite-patch-id: a109eaf08147f50149ad661a58122b6745a52445 >> >> Can you rebase this on Rob's msm-next tree >> (https://gitlab.freedesktop.org/drm/msm.git) and test? It doesn't >> apply >> for me because I have the dp phy patch from there. >>
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index 2e3e1917351f..e1595d829e04 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/phy/phy.h> #include <linux/phy/phy-dp.h> +#include <linux/pm_opp.h> #include <drm/drm_fixed.h> #include <drm/drm_dp_helper.h> #include <drm/drm_print.h> @@ -76,6 +77,8 @@ struct dp_ctrl_private { struct dp_parser *parser; struct dp_catalog *catalog; + struct opp_table *opp_table; + struct completion idle_comp; struct completion video_comp; }; @@ -1836,6 +1839,7 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_parser *parser) { struct dp_ctrl_private *ctrl; + int ret; if (!dev || !panel || !aux || !link || !catalog) { @@ -1849,6 +1853,21 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, return ERR_PTR(-ENOMEM); } + ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link"); + + if (IS_ERR(ctrl->opp_table)) { + dev_err(dev, "invalid DP OPP table in device tree\n"); + ctrl->opp_table = NULL; + } else { + /* OPP table is optional */ + ret = dev_pm_opp_of_add_table(dev); + if (ret && ret != -ENODEV) { + dev_err(dev, "add DP OPP table\n"); + dev_pm_opp_put_clkname(ctrl->opp_table); + ctrl->opp_table = NULL; + } + } + init_completion(&ctrl->idle_comp); init_completion(&ctrl->video_comp); @@ -1864,6 +1883,18 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, return &ctrl->dp_ctrl; } -void dp_ctrl_put(struct dp_ctrl *dp_ctrl) +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl) { + struct dp_ctrl_private *ctrl; + + if (!dp_ctrl) + return; + + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl); + + if (ctrl->opp_table != NULL) { + dev_pm_opp_of_remove_table(dev); + dev_pm_opp_put_clkname(ctrl->opp_table); + ctrl->opp_table = NULL; + } } diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h index f60ba93c8678..19b412a93e02 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h @@ -31,6 +31,6 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link, struct dp_panel *panel, struct drm_dp_aux *aux, struct dp_power *power, struct dp_catalog *catalog, struct dp_parser *parser); -void dp_ctrl_put(struct dp_ctrl *dp_ctrl); +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl); #endif /* _DP_CTRL_H_ */ diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 431dff9de797..be941eedf4c6 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -648,8 +648,10 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data) static void dp_display_deinit_sub_modules(struct dp_display_private *dp) { + struct device *dev = &dp->pdev->dev; + dp_debug_put(dp->debug); - dp_ctrl_put(dp->ctrl); + dp_ctrl_put(dev, dp->ctrl); dp_panel_put(dp->panel); dp_aux_put(dp->aux); dp_audio_put(dp->audio); @@ -693,7 +695,7 @@ static int dp_init_sub_modules(struct dp_display_private *dp) goto error; } - dp->power = dp_power_get(dp->parser); + dp->power = dp_power_get(dev, dp->parser); if (IS_ERR(dp->power)) { rc = PTR_ERR(dp->power); DRM_ERROR("failed to initialize power, rc = %d\n", rc); @@ -749,7 +751,7 @@ static int dp_init_sub_modules(struct dp_display_private *dp) return rc; error_audio: - dp_ctrl_put(dp->ctrl); + dp_ctrl_put(dev, dp->ctrl); error_ctrl: dp_panel_put(dp->panel); error_link: diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c index 17c1fc6a2d44..3d75bf09e38f 100644 --- a/drivers/gpu/drm/msm/dp/dp_power.c +++ b/drivers/gpu/drm/msm/dp/dp_power.c @@ -8,12 +8,14 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/regulator/consumer.h> +#include <linux/pm_opp.h> #include "dp_power.h" #include "msm_drv.h" struct dp_power_private { struct dp_parser *parser; struct platform_device *pdev; + struct device *dev; struct clk *link_clk_src; struct clk *pixel_provider; struct clk *link_provider; @@ -148,18 +150,49 @@ static int dp_power_clk_deinit(struct dp_power_private *power) return 0; } +static int dp_power_clk_set_link_rate(struct dp_power_private *power, + struct dss_clk *clk_arry, int num_clk, int enable) +{ + u32 rate; + int i, rc = 0; + + for (i = 0; i < num_clk; i++) { + if (clk_arry[i].clk) { + if (clk_arry[i].type == DSS_CLK_PCLK) { + if (enable) + rate = clk_arry[i].rate; + else + rate = 0; + + rc = dev_pm_opp_set_rate(power->dev, rate); + } + + } + } + return rc; +} + static int dp_power_clk_set_rate(struct dp_power_private *power, enum dp_pm_type module, bool enable) { int rc = 0; struct dss_module_power *mp = &power->parser->mp[module]; - if (enable) { - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); + if (module == DP_CTRL_PM) { + rc = dp_power_clk_set_link_rate(power, mp->clk_config, mp->num_clk, enable); if (rc) { - DRM_ERROR("failed to set clks rate.\n"); + DRM_ERROR("failed to set link clks rate.\n"); return rc; } + } else { + + if (enable) { + rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk); + if (rc) { + DRM_ERROR("failed to set clks rate.\n"); + return rc; + } + } } rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable); @@ -349,7 +382,7 @@ int dp_power_deinit(struct dp_power *dp_power) return 0; } -struct dp_power *dp_power_get(struct dp_parser *parser) +struct dp_power *dp_power_get(struct device *dev, struct dp_parser *parser) { struct dp_power_private *power; struct dp_power *dp_power; @@ -365,6 +398,7 @@ struct dp_power *dp_power_get(struct dp_parser *parser) power->parser = parser; power->pdev = parser->pdev; + power->dev = dev; dp_power = &power->dp_power; diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h index 76743d755833..7d0327bbc0d5 100644 --- a/drivers/gpu/drm/msm/dp/dp_power.h +++ b/drivers/gpu/drm/msm/dp/dp_power.h @@ -102,6 +102,6 @@ void dp_power_client_deinit(struct dp_power *power); * methods to be called by the client to configure the power related * modueles. */ -struct dp_power *dp_power_get(struct dp_parser *parser); +struct dp_power *dp_power_get(struct device *dev, struct dp_parser *parser); #endif /* _DP_POWER_H_ */
Set link rate by using OPP set rate api so that CX level will be set accordingly base on the link rate. Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 33 ++++++++++++++++++++++- drivers/gpu/drm/msm/dp/dp_ctrl.h | 2 +- drivers/gpu/drm/msm/dp/dp_display.c | 8 +++--- drivers/gpu/drm/msm/dp/dp_power.c | 42 ++++++++++++++++++++++++++--- drivers/gpu/drm/msm/dp/dp_power.h | 2 +- 5 files changed, 77 insertions(+), 10 deletions(-) base-commit: 3c0f462da069af12211901ddf26f7e16e6951d9b prerequisite-patch-id: a109eaf08147f50149ad661a58122b6745a52445