| Message ID | 1398693687-13967-8-git-send-email-rogerq@ti.com |
|---|---|
| State | New |
| Headers | show |
On Mon, Apr 28, 2014 at 05:01:27PM +0300, Roger Quadros wrote: > Add USB pinmux information and USB modes > for the USB controllers. > > Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> > --- > arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index 5babba0..1d77815 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts > @@ -93,6 +93,18 @@ > 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ > >; > }; > + > + usb1_pins: pinmux_usb1_pins { > + pinctrl-single,pins = < > + 0x280 0xc0000 /* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ > + >; > + }; > + > + usb2_pins: pinmux_usb2_pins { > + pinctrl-single,pins = < > + 0x284 0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ > + >; > + }; > }; > > &i2c1 { > @@ -273,3 +285,15 @@ > &cpu0 { > cpu0-supply = <&smps123_reg>; > }; > + > +&usb1 { > + dr_mode = "peripheral"; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_pins>; > +}; > + > +&usb2 { > + dr_mode = "host"; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb2_pins>; > +}; > -- > 1.8.3.2 >
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 5babba0..1d77815 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -93,6 +93,18 @@ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 0xc0000 /* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ + >; + }; }; &i2c1 { @@ -273,3 +285,15 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +};
Add USB pinmux information and USB modes for the USB controllers. Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)