@@ -27,7 +27,7 @@ chosen {
stdout-path = "serial2:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
menu {
@@ -211,7 +211,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <20000>;
samsung,i2c-slave-addr = <0x66>;
- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
@@ -290,7 +290,7 @@ eeprom@51 {
reg = <0x51>;
};
- wm8994: wm8994@1a {
+ wm8994: codec@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
@@ -385,7 +385,7 @@ &spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
- w25q80bw@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
@@ -217,7 +217,7 @@ panel_in: endpoint {
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: mmc3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
<&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
@@ -289,7 +289,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686: max77686@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
@@ -105,7 +105,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- s5m8767-pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5250-arndale.dts | 4 ++-- arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++-- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++-- arch/arm/boot/dts/exynos5250-spring.dts | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)