@@ -33,7 +33,7 @@ struct ascot2e_config {
#if IS_REACHABLE(CONFIG_DVB_ASCOT2E)
/**
- * Attach an ascot2e tuner
+ * ascot2e_attach - Attach an ascot2e tuner
*
* @fe: frontend to be attached
* @config: pointer to &struct ascot2e_config with tuner configuration.
@@ -96,7 +96,7 @@ struct cxd2820r_config {
#if IS_REACHABLE(CONFIG_DVB_CXD2820R)
/**
- * Attach a cxd2820r demod
+ * cxd2820r_attach - Attach a cxd2820r demod
*
* @config: pointer to &struct cxd2820r_config with demod configuration.
* @i2c: i2c adapter to use.
@@ -54,7 +54,7 @@ struct drxk_config {
#if IS_REACHABLE(CONFIG_DVB_DRXK)
/**
- * Attach a drxk demod
+ * drxk_attach - Attach a drxk demod
*
* @config: pointer to &struct drxk_config with demod configuration.
* @i2c: i2c adapter to use.
@@ -38,7 +38,7 @@ struct dvb_pll_config {
#if IS_REACHABLE(CONFIG_DVB_PLL)
/**
- * Attach a dvb-pll to the supplied frontend structure.
+ * dvb_pll_attach - Attach a dvb-pll to the supplied frontend structure.
*
* @fe: Frontend to attach to.
* @pll_addr: i2c address of the PLL (if used).
@@ -44,7 +44,7 @@ struct helene_config {
#if IS_REACHABLE(CONFIG_DVB_HELENE)
/**
- * Attach a helene tuner (terrestrial and cable standards)
+ * helene_attach - Attach a helene tuner (terrestrial and cable standards)
*
* @fe: frontend to be attached
* @config: pointer to &struct helene_config with tuner configuration.
@@ -57,7 +57,7 @@ extern struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c);
/**
- * Attach a helene tuner (satellite standards)
+ * helene_attach_s - Attach a helene tuner (satellite standards)
*
* @fe: frontend to be attached
* @config: pointer to &struct helene_config with tuner configuration.
@@ -33,7 +33,7 @@ struct horus3a_config {
#if IS_REACHABLE(CONFIG_DVB_HORUS3A)
/**
- * Attach a horus3a tuner
+ * horus3a_attach - Attach a horus3a tuner
*
* @fe: frontend to be attached
* @config: pointer to &struct helene_config with tuner configuration.
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
*
* Copyright (C) 2010 Malcolm Priestley
@@ -31,7 +31,7 @@ struct ix2505v_config {
#if IS_REACHABLE(CONFIG_DVB_IX2505V)
/**
- * Attach a ix2505v tuner to the supplied frontend structure.
+ * ix2505v_attach - Attach a ix2505v tuner to the supplied frontend structure.
*
* @fe: Frontend to attach to.
* @config: pointer to &struct ix2505v_config
@@ -128,7 +128,7 @@ struct m88ds3103_config {
#if defined(CONFIG_DVB_M88DS3103) || \
(defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
/**
- * Attach a m88ds3103 demod
+ * m88ds3103_attach - Attach a m88ds3103 demod
*
* @config: pointer to &struct m88ds3103_config with demod configuration.
* @i2c: i2c adapter to use.
@@ -26,7 +26,7 @@ struct mb86a20s_config {
#if IS_REACHABLE(CONFIG_DVB_MB86A20S)
/**
- * Attach a mb86a20s demod
+ * mb86a20s_attach - Attach a mb86a20s demod
*
* @config: pointer to &struct mb86a20s_config with demod configuration.
* @i2c: i2c adapter to use.
@@ -15,7 +15,7 @@
#if IS_REACHABLE(CONFIG_DVB_STB6000)
/**
- * Attach a stb6000 tuner to the supplied frontend structure.
+ * stb6000_attach - Attach a stb6000 tuner to the supplied frontend structure.
*
* @fe: Frontend to attach to.
* @addr: i2c address of the tuner.
@@ -14,7 +14,7 @@
#include <media/dvb_frontend.h>
/**
- * Attach a tda826x tuner to the supplied frontend structure.
+ * tda826x_attach - Attach a tda826x tuner to the supplied frontend structure.
*
* @fe: Frontend to attach to.
* @addr: i2c address of the tuner.
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */
-/**
+/*
* Driver for Zarlink ZL10036 DVB-S silicon tuner
*
* Copyright (C) 2006 Tino Reichardt
@@ -19,7 +19,7 @@ struct zl10036_config {
#if IS_REACHABLE(CONFIG_DVB_ZL10036)
/**
- * Attach a zl10036 tuner to the supplied frontend structure.
+ * zl10036_attach - Attach a zl10036 tuner to the supplied frontend structure.
*
* @fe: Frontend to attach to.
* @config: zl10036_config structure.
@@ -418,7 +418,7 @@ struct ipu3_uapi_af_config_s {
IPU3_UAPI_AWB_FR_SPARE_FOR_BUBBLES) * IPU3_UAPI_MAX_STRIPES)
/**
- * struct ipu3_uapi_awb_fr_meta_data - AWB filter response meta data
+ * struct ipu3_uapi_awb_fr_raw_buffer - AWB filter response meta data
*
* @meta_data: Statistics output on the grid after convolving with 1D filter.
*/
@@ -1506,7 +1506,7 @@ struct ipu3_uapi_sharp_cfg {
} __packed;
/**
- * struct struct ipu3_uapi_far_w - Sharpening config for far sub-group
+ * struct ipu3_uapi_far_w - Sharpening config for far sub-group
*
* @dir_shrp: Weight of wide direct sharpening, u1.6, range [0, 64], default 64.
* @reserved0: reserved
@@ -1526,7 +1526,7 @@ struct ipu3_uapi_far_w {
} __packed;
/**
- * struct struct ipu3_uapi_unsharp_cfg - Unsharp config
+ * struct ipu3_uapi_unsharp_cfg - Unsharp config
*
* @unsharp_weight: Unsharp mask blending weight.
* u1.6, range [0, 64], default 16.
@@ -1772,7 +1772,7 @@ struct ipu3_uapi_vss_lut_y {
} __packed;
/**
- * struct ipu3_uapi_yuvp1_iefd_vssnlm_cf - IEFd Vssnlm Lookup table
+ * struct ipu3_uapi_yuvp1_iefd_vssnlm_cfg - IEFd Vssnlm Lookup table
*
* @vss_lut_x: vss lookup table. See &ipu3_uapi_vss_lut_x description
* @vss_lut_y: vss lookup table. See &ipu3_uapi_vss_lut_y description
@@ -321,7 +321,7 @@ int dvb_create_media_graph(struct dvb_adapter *adap,
int dvb_generic_open(struct inode *inode, struct file *file);
/**
- * dvb_generic_close - Digital TV close function, used by DVB devices
+ * dvb_generic_release - Digital TV close function, used by DVB devices
*
* @inode: pointer to &struct inode.
* @file: pointer to &struct file.
@@ -1292,7 +1292,7 @@ static inline void v4l2_ctrl_request_hdl_put(struct v4l2_ctrl_handler *hdl)
}
/**
- * v4l2_ctrl_request_ctrl_find() - Find a control with the given ID.
+ * v4l2_ctrl_request_hdl_ctrl_find() - Find a control with the given ID.
*
* @hdl: The control handler from the request.
* @id: The ID of the control to find.
@@ -43,8 +43,8 @@ enum vfl_devnode_type {
};
/**
- * enum vfl_direction - Identifies if a &struct video_device corresponds
- * to a receiver, a transmitter or a mem-to-mem device.
+ * enum vfl_devnode_direction - Identifies if a &struct video_device
+ * corresponds to a receiver, a transmitter or a mem-to-mem device.
*
* @VFL_DIR_RX: device is a receiver.
* @VFL_DIR_TX: device is a transmitter.
@@ -174,7 +174,7 @@ int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
void v4l2_device_unregister_subdev(struct v4l2_subdev *sd);
/**
- * __v4l2_device_register_ro_subdev_nodes - Registers device nodes for
+ * __v4l2_device_register_subdev_nodes - Registers device nodes for
* all subdevs of the v4l2 device that are marked with the
* %V4L2_SUBDEV_FL_HAS_DEVNODE flag.
*
@@ -224,7 +224,7 @@ static inline bool can_reduce_fps(struct v4l2_bt_timings *bt)
}
/**
- * struct v4l2_hdmi_rx_colorimetry - describes the HDMI colorimetry information
+ * struct v4l2_hdmi_colorimetry - describes the HDMI colorimetry information
* @colorspace: enum v4l2_colorspace, the colorspace
* @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
* @quantization: enum v4l2_quantization, colorspace quantization
@@ -514,7 +514,7 @@ v4l2_async_notifier_parse_fwnode_endpoints_by_port(struct device *dev,
parse_endpoint_func parse_endpoint);
/**
- * v4l2_fwnode_reference_parse_sensor_common - parse common references on
+ * v4l2_async_notifier_parse_fwnode_sensor_common - parse common references on
* sensors for async sub-devices
* @dev: the device node the properties of which are parsed for references
* @notifier: the async notifier where the async subdevs will be added
@@ -145,7 +145,7 @@ v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
}
/**
- * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ * v4l2_fill_mbus_format - Ancillary routine that fills a &struct
* v4l2_mbus_framefmt from a &struct v4l2_pix_format and a
* data format code.
*
@@ -168,7 +168,7 @@ static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
}
/**
- * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ * v4l2_fill_pix_format_mplane - Ancillary routine that fills a &struct
* v4l2_pix_format_mplane fields from a media bus structure.
*
* @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled
@@ -188,7 +188,7 @@ v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt,
}
/**
- * v4l2_fill_pix_format - Ancillary routine that fills a &struct
+ * v4l2_fill_mbus_format_mplane - Ancillary routine that fills a &struct
* v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane.
*
* @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled
@@ -309,7 +309,7 @@ struct v4l2_subdev_audio_ops {
};
/**
- * enum v4l2_mbus_frame_desc_entry - media bus frame description flags
+ * enum v4l2_mbus_frame_desc_flags - media bus frame description flags
*
* @V4L2_MBUS_FRAME_DESC_FL_LEN_MAX:
* Indicates that &struct v4l2_mbus_frame_desc_entry->length field
@@ -1043,7 +1043,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file,
size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock);
/**
- * vb2_read() - implements write() syscall logic.
+ * vb2_write() - implements write() syscall logic.
* @q: pointer to &struct vb2_queue with videobuf2 queue.
* @data: pointed to target userspace buffer
* @count: number of bytes to write
Some identifiers have different names between their prototypes and the kernel-doc markup. Seome seems to be due to cut-and-paste related issues. Others need to be fixed, as kernel-doc markups should use this format: identifier - description Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- drivers/media/dvb-frontends/ascot2e.h | 2 +- drivers/media/dvb-frontends/cxd2820r.h | 2 +- drivers/media/dvb-frontends/drxk.h | 2 +- drivers/media/dvb-frontends/dvb-pll.h | 2 +- drivers/media/dvb-frontends/helene.h | 4 ++-- drivers/media/dvb-frontends/horus3a.h | 2 +- drivers/media/dvb-frontends/ix2505v.h | 4 ++-- drivers/media/dvb-frontends/m88ds3103.h | 2 +- drivers/media/dvb-frontends/mb86a20s.h | 2 +- drivers/media/dvb-frontends/stb6000.h | 2 +- drivers/media/dvb-frontends/tda826x.h | 2 +- drivers/media/dvb-frontends/zl10036.h | 4 ++-- drivers/staging/media/ipu3/include/intel-ipu3.h | 8 ++++---- include/media/dvbdev.h | 2 +- include/media/v4l2-ctrls.h | 2 +- include/media/v4l2-dev.h | 4 ++-- include/media/v4l2-device.h | 2 +- include/media/v4l2-dv-timings.h | 2 +- include/media/v4l2-fwnode.h | 2 +- include/media/v4l2-mediabus.h | 6 +++--- include/media/v4l2-subdev.h | 2 +- include/media/videobuf2-core.h | 2 +- 22 files changed, 31 insertions(+), 31 deletions(-)