[v1] i2c: aspeed: add KUnit tests for clock parameters

Message ID	20201016214848.1365719-1-brendanhiggins@google.com
State	New
Headers	show Return-Path: <SRS0=amRC=DX=vger.kernel.org=linux-kselftest-owner@kernel.org> Sender: "brendanhiggins via sendgmr" <brendanhiggins@mactruck.svl.corp.google.com> Date: Fri, 16 Oct 2020 14:48:48 -0700 Message-Id: <20201016214848.1365719-1-brendanhiggins@google.com> Mime-Version: 1.0 Subject: [PATCH v1] i2c: aspeed: add KUnit tests for clock parameters From: Brendan Higgins <brendanhiggins@google.com> To: shuah@kernel.org, davidgow@google.com, benh@kernel.crashing.org, joel@jms.id.au, andrew@aj.id.au, wsa@kernel.org Cc: linux-kselftest@vger.kernel.org, kunit-dev@googlegroups.com, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, openbmc@lists.ozlabs.org, linux-aspeed@lists.ozlabs.org, benjaminfair@google.com, Brendan Higgins <brendanhiggins@google.com> Content-Type: text/plain; charset="UTF-8" Precedence: bulk
Series	[v1] i2c: aspeed: add KUnit tests for clock parameters \| expand [v1] i2c: aspeed: add KUnit tests for clock parameters

diff --git a/MAINTAINERS b/MAINTAINERS index deaafb617361c..683382df2434a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1653,6 +1653,7 @@ L: openbmc@lists.ozlabs.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-aspeed.txt F: Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt +F: drivers/i2c/busses/i2c-aspeed-test.c F: drivers/i2c/busses/i2c-aspeed.c F: drivers/irqchip/irq-aspeed-i2c-ic.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 293e7a0760e77..0f12090f9fe26 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -379,7 +379,7 @@ config I2C_ALTERA config I2C_ASPEED tristate "Aspeed I2C Controller" - depends on ARCH_ASPEED || COMPILE_TEST + depends on ARCH_ASPEED || COMPILE_TEST || KUNIT=y help If you say yes to this option, support will be included for the Aspeed I2C controller. @@ -387,6 +387,22 @@ config I2C_ASPEED This driver can also be built as a module. If so, the module will be called i2c-aspeed. +config I2C_ASPEED_KUNIT_TEST + bool "Aspeed I2C Controller KUnit test" + depends on I2C_ASPEED=y + help + This builds the Aspeed I2C KUnit tests. + + KUnit tests run during boot and output the results to the debug log + in TAP format (https://testanything.org/). Only useful for kernel devs + running KUnit test harness and are not for inclusion into a + production build. + + For more information on KUnit and unit tests in general please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. + config I2C_AT91 tristate "Atmel AT91 I2C Two-Wire interface (TWI)" depends on ARCH_AT91 || COMPILE_TEST diff --git a/drivers/i2c/busses/i2c-aspeed-test.c b/drivers/i2c/busses/i2c-aspeed-test.c new file mode 100644 index 0000000000000..93e73af95b645 --- /dev/null +++ b/drivers/i2c/busses/i2c-aspeed-test.c @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Aspeed 24XX/25XX I2C Controller KUnit tests. + * + * Copyright (C) 2020 Google LLC. + */ + +#include <kunit/test.h> + +#define ASPEED_I2C_MAX_BASE_DIVISOR (1 << ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) +#define ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK GENMASK(2, 0) +#define ASPEED_I2C_24XX_CLK_HIGH_LOW_MAX ((ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK + 1) * 2) +#define ASPEED_I2C_24XX_MAX_DIVISOR \ + (ASPEED_I2C_MAX_BASE_DIVISOR * ASPEED_I2C_24XX_CLK_HIGH_LOW_MAX) +#define ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK GENMASK(3, 0) +#define ASPEED_I2C_25XX_CLK_HIGH_LOW_MAX ((ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK + 1) * 2) +#define ASPEED_I2C_25XX_MAX_DIVISOR \ + (ASPEED_I2C_MAX_BASE_DIVISOR * ASPEED_I2C_25XX_CLK_HIGH_LOW_MAX) + +static u32 aspeed_i2c_get_base_clk(u32 reg_val) +{ + return reg_val & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK; +} + +static u32 aspeed_i2c_get_clk_high(u32 reg_val) +{ + return (reg_val & ASPEED_I2CD_TIME_SCL_HIGH_MASK) >> + ASPEED_I2CD_TIME_SCL_HIGH_SHIFT; +} + +static u32 aspeed_i2c_get_clk_low(u32 reg_val) +{ + return (reg_val & ASPEED_I2CD_TIME_SCL_LOW_MASK) >> + ASPEED_I2CD_TIME_SCL_LOW_SHIFT; +} + +static void aspeed_i2c_get_clk_reg_val_params_test(struct kunit *test, + u32 (*get_clk_reg_val)(struct device *, u32), + u32 divisor, + u32 base_clk, + u32 clk_high, + u32 clk_low) +{ + u32 reg_val; + + reg_val = get_clk_reg_val(NULL, divisor); + KUNIT_ASSERT_EQ(test, + (u32)(reg_val & ~(ASPEED_I2CD_TIME_SCL_HIGH_MASK | + ASPEED_I2CD_TIME_SCL_LOW_MASK | + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK)), + (u32)0); + KUNIT_EXPECT_EQ(test, aspeed_i2c_get_base_clk(reg_val), base_clk); + KUNIT_EXPECT_EQ(test, aspeed_i2c_get_clk_high(reg_val), clk_high); + KUNIT_EXPECT_EQ(test, aspeed_i2c_get_clk_low(reg_val), clk_low); +} + +static void aspeed_i2c_24xx_get_clk_reg_val_params_test(struct kunit *test, + u32 divisor, + u32 base_clk, + u32 clk_high, + u32 clk_low) +{ + aspeed_i2c_get_clk_reg_val_params_test(test, + aspeed_i2c_24xx_get_clk_reg_val, + divisor, + base_clk, + clk_high, + clk_low); +} + +/* + * Verify that smallest possible divisors are handled correctly. + */ +static void aspeed_i2c_24xx_get_clk_reg_val_test_min(struct kunit *test) +{ + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 0, 0, 0, 0); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 1, 0, 0, 0); +} + +/* + * Verify that largest possible divisors are handled correctly. + */ +static void aspeed_i2c_24xx_get_clk_reg_val_test_max(struct kunit *test) +{ + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, + ASPEED_I2C_24XX_MAX_DIVISOR, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, + ASPEED_I2C_24XX_MAX_DIVISOR + 1, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, + U32_MAX, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_24XX_CLK_HIGH_LOW_MASK); +} + +/* + * Spot check values from the datasheet table. + */ +static void aspeed_i2c_24xx_get_clk_reg_val_test_datasheet(struct kunit *test) +{ + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 6, 0, 2, 2); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 7, 0, 3, 2); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 16, 0, 7, 7); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 18, 1, 4, 3); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 491520, 15, 7, 6); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 524288, 15, 7, 7); +} + +/* + * Check that a divisor that cannot be represented exactly is rounded up to the + * next divisor that can be represented. + */ +static void aspeed_i2c_24xx_get_clk_reg_val_test_round_up(struct kunit *test) +{ + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 16, 0, 7, 7); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 17, 1, 4, 3); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 18, 1, 4, 3); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 19, 1, 4, 4); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 491519, 15, 7, 6); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 491520, 15, 7, 6); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 524287, 15, 7, 7); + aspeed_i2c_24xx_get_clk_reg_val_params_test(test, 524288, 15, 7, 7); +} + +static void aspeed_i2c_25xx_get_clk_reg_val_params_test(struct kunit *test, + u32 divisor, + u32 base_clk, + u32 clk_high, + u32 clk_low) +{ + aspeed_i2c_get_clk_reg_val_params_test(test, + aspeed_i2c_25xx_get_clk_reg_val, + divisor, + base_clk, + clk_high, + clk_low); +} + +/* + * Verify that smallest possible divisors are handled correctly. + */ +static void aspeed_i2c_25xx_get_clk_reg_val_test_min(struct kunit *test) +{ + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 0, 0, 0, 0); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 1, 0, 0, 0); +} + +/* + * Verify that largest possible divisors are handled correctly. + */ +static void aspeed_i2c_25xx_get_clk_reg_val_test_max(struct kunit *test) +{ + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, + ASPEED_I2C_25XX_MAX_DIVISOR, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, + ASPEED_I2C_25XX_MAX_DIVISOR + 1, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, + U32_MAX, + ASPEED_I2CD_TIME_BASE_DIVISOR_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK, + ASPEED_I2C_25XX_CLK_HIGH_LOW_MASK); +} + +/* + * Spot check values from the datasheet table. + */ +static void aspeed_i2c_25xx_get_clk_reg_val_test_datasheet(struct kunit *test) +{ + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 6, 0, 2, 2); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 7, 0, 3, 2); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 32, 0, 15, 15); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 34, 1, 8, 7); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2048, 6, 15, 15); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2176, 7, 8, 7); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 3072, 7, 11, 11); +} + +/* + * Check that a divisor that cannot be represented exactly is rounded up to the + * next divisor that can be represented. + */ +static void aspeed_i2c_25xx_get_clk_reg_val_test_round_up(struct kunit *test) +{ + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2047, 6, 15, 15); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2048, 6, 15, 15); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2175, 7, 8, 7); + aspeed_i2c_25xx_get_clk_reg_val_params_test(test, 2176, 7, 8, 7); +} + +static struct kunit_case aspeed_i2c_test_cases[] = { + KUNIT_CASE(aspeed_i2c_24xx_get_clk_reg_val_test_min), + KUNIT_CASE(aspeed_i2c_24xx_get_clk_reg_val_test_max), + KUNIT_CASE(aspeed_i2c_24xx_get_clk_reg_val_test_datasheet), + KUNIT_CASE(aspeed_i2c_24xx_get_clk_reg_val_test_round_up), + KUNIT_CASE(aspeed_i2c_25xx_get_clk_reg_val_test_min), + KUNIT_CASE(aspeed_i2c_25xx_get_clk_reg_val_test_max), + KUNIT_CASE(aspeed_i2c_25xx_get_clk_reg_val_test_datasheet), + KUNIT_CASE(aspeed_i2c_25xx_get_clk_reg_val_test_round_up), + {}, +}; + +static struct kunit_suite aspeed_i2c_test = { + .name = "aspeed-i2c", + .test_cases = aspeed_i2c_test_cases, +}; +kunit_test_suite(aspeed_i2c_test); diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 31268074c4221..68c460b7d4def 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -1082,6 +1082,10 @@ static struct platform_driver aspeed_i2c_bus_driver = { }; module_platform_driver(aspeed_i2c_bus_driver); +#ifdef CONFIG_I2C_ASPEED_KUNIT_TEST +#include "i2c-aspeed-test.c" +#endif /* CONFIG_I2C_ASPEED_KUNIT_TEST */ + MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>"); MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); MODULE_LICENSE("GPL v2");

[v1] i2c: aspeed: add KUnit tests for clock parameters

Commit Message

Patch