| Message ID | 1407c8a264de11cb9cd7a13b8f7b5f66ca957127.1603231949.git.gurus@codeaurora.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for VBUS detection | expand |
On Tue, 20 Oct 2020 15:17:24 -0700, Guru Das Srinagesh wrote: > From: Anirudh Ghayal <aghayal@codeaurora.org> > > Convert bindings to YAML. Also add compatible string that adds support > for reporting the VBUS status that can be detected via a dedicated PMIC > pin. > > Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > --- > .../bindings/extcon/qcom,pm8941-misc.txt | 41 ---------------- > .../bindings/extcon/qcom,pm8941-misc.yaml | 56 ++++++++++++++++++++++ > 2 files changed, 56 insertions(+), 41 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt > create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml: properties:compatible:oneOf:0:const: ['qcom,pm8941-misc', 'qcom,pmd-vbus-det'] is not of type 'string' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml: properties:interrupt-names:anyOf:0:const: ['usb_id', 'usb_vbus'] is not of type 'string' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml: ignoring, error in schema: properties: compatible: oneOf: 0: const warning: no schema found in file: ./Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml Error: Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.example.dts:23.49-50 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1366: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1385252 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt deleted file mode 100644 index 35383adb..0000000 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt +++ /dev/null @@ -1,41 +0,0 @@ -Qualcomm's PM8941 USB ID Extcon device - -Some Qualcomm PMICs have a "misc" module that can be used to detect when -the USB ID pin has been pulled low or high. - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,pm8941-misc"; - -- reg: - Usage: required - Value type: <u32> - Definition: Should contain the offset to the misc address space - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain the usb id interrupt - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the string "usb_id" for the usb id interrupt - -Example: - - pmic { - usb_id: misc@900 { - compatible = "qcom,pm8941-misc"; - reg = <0x900>; - interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "usb_id"; - }; - } - - usb-controller { - extcon = <&usb_id>; - }; diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml new file mode 100644 index 0000000..9fbdb5f --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm's PM8941 USB ID Extcon device + +maintainers: + - Guru Das Srinagesh <gurus@codeaurora.org> + +description: | + Some Qualcomm PMICs have a "misc" module that can be used to detect when + the USB ID pin has been pulled low or high. + +properties: + compatible: + oneOf: + - const: + - qcom,pm8941-misc + - qcom,pmd-vbus-det + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + anyOf: + - const: + - usb_id + - usb_vbus + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + pmic { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + } + + usb-controller { + extcon = <&usb_id>; + };