@@ -2,3 +2,4 @@ common-obj-$(CONFIG_CAN_SJA1000) += can_sja1000.o
common-obj-$(CONFIG_CAN_PCI) += can_kvaser_pci.o
common-obj-$(CONFIG_CAN_PCI) += can_pcm3680_pci.o
common-obj-$(CONFIG_CAN_PCI) += can_mioe3680_pci.o
+common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-can.o
new file mode 100644
@@ -0,0 +1,1116 @@
+/*
+ * QEMU model of the Xilinx ZynqMP CAN controller.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and
+ * Pavel Pisa
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/register.h"
+#include "hw/irq.h"
+#include "qapi/error.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qemu/cutils.h"
+#include "sysemu/sysemu.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
+#include "net/can_emu.h"
+#include "net/can_host.h"
+#include "qemu/event_notifier.h"
+#include "qom/object_interfaces.h"
+#include "hw/net/xlnx-zynqmp-can.h"
+
+#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG
+#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0
+#endif
+
+#define DB_PRINT(...) do { \
+ if (XLNX_ZYNQMP_CAN_ERR_DEBUG) { \
+ qemu_log(__VA_ARGS__); \
+ } \
+} while (0)
+
+#define MAX_DLC 8
+#undef ERROR
+
+REG32(SOFTWARE_RESET_REGISTER, 0x0)
+ FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1)
+ FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1)
+REG32(MODE_SELECT_REGISTER, 0x4)
+ FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1)
+ FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1)
+ FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1)
+REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8)
+ FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP, 0, 8)
+REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4)
+REG32(ERROR_COUNTER_REGISTER, 0x10)
+ FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8)
+ FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8)
+REG32(ERROR_STATUS_REGISTER, 0x14)
+ FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1)
+ FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1)
+ FIELD(ERROR_STATUS_REGISTER, STER, 2, 1)
+ FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1)
+ FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1)
+REG32(STATUS_REGISTER, 0x18)
+ FIELD(STATUS_REGISTER, SNOOP, 12, 1)
+ FIELD(STATUS_REGISTER, ACFBSY, 11, 1)
+ FIELD(STATUS_REGISTER, TXFLL, 10, 1)
+ FIELD(STATUS_REGISTER, TXBFLL, 9, 1)
+ FIELD(STATUS_REGISTER, ESTAT, 7, 2)
+ FIELD(STATUS_REGISTER, ERRWRN, 6, 1)
+ FIELD(STATUS_REGISTER, BBSY, 5, 1)
+ FIELD(STATUS_REGISTER, BIDLE, 4, 1)
+ FIELD(STATUS_REGISTER, NORMAL, 3, 1)
+ FIELD(STATUS_REGISTER, SLEEP, 2, 1)
+ FIELD(STATUS_REGISTER, LBACK, 1, 1)
+ FIELD(STATUS_REGISTER, CONFIG, 0, 1)
+REG32(INTERRUPT_STATUS_REGISTER, 0x1c)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1)
+REG32(INTERRUPT_ENABLE_REGISTER, 0x20)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1)
+REG32(INTERRUPT_CLEAR_REGISTER, 0x24)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1)
+REG32(TIMESTAMP_REGISTER, 0x28)
+ FIELD(TIMESTAMP_REGISTER, CTS, 0, 1)
+REG32(WIR, 0x2c)
+ FIELD(WIR, EW, 8, 8)
+ FIELD(WIR, FW, 0, 8)
+REG32(TXFIFO_ID, 0x30)
+ FIELD(TXFIFO_ID, IDH, 21, 11)
+ FIELD(TXFIFO_ID, SRRRTR, 20, 1)
+ FIELD(TXFIFO_ID, IDE, 19, 1)
+ FIELD(TXFIFO_ID, IDL, 1, 18)
+ FIELD(TXFIFO_ID, RTR, 0, 1)
+REG32(TXFIFO_DLC, 0x34)
+ FIELD(TXFIFO_DLC, DLC, 28, 4)
+REG32(TXFIFO_DATA1, 0x38)
+ FIELD(TXFIFO_DATA1, DB0, 24, 8)
+ FIELD(TXFIFO_DATA1, DB1, 16, 8)
+ FIELD(TXFIFO_DATA1, DB2, 8, 8)
+ FIELD(TXFIFO_DATA1, DB3, 0, 8)
+REG32(TXFIFO_DATA2, 0x3c)
+ FIELD(TXFIFO_DATA2, DB4, 24, 8)
+ FIELD(TXFIFO_DATA2, DB5, 16, 8)
+ FIELD(TXFIFO_DATA2, DB6, 8, 8)
+ FIELD(TXFIFO_DATA2, DB7, 0, 8)
+REG32(TXHPB_ID, 0x40)
+ FIELD(TXHPB_ID, IDH, 21, 11)
+ FIELD(TXHPB_ID, SRRRTR, 20, 1)
+ FIELD(TXHPB_ID, IDE, 19, 1)
+ FIELD(TXHPB_ID, IDL, 1, 18)
+ FIELD(TXHPB_ID, RTR, 0, 1)
+REG32(TXHPB_DLC, 0x44)
+ FIELD(TXHPB_DLC, DLC, 28, 4)
+REG32(TXHPB_DATA1, 0x48)
+ FIELD(TXHPB_DATA1, DB0, 24, 8)
+ FIELD(TXHPB_DATA1, DB1, 16, 8)
+ FIELD(TXHPB_DATA1, DB2, 8, 8)
+ FIELD(TXHPB_DATA1, DB3, 0, 8)
+REG32(TXHPB_DATA2, 0x4c)
+ FIELD(TXHPB_DATA2, DB4, 24, 8)
+ FIELD(TXHPB_DATA2, DB5, 16, 8)
+ FIELD(TXHPB_DATA2, DB6, 8, 8)
+ FIELD(TXHPB_DATA2, DB7, 0, 8)
+REG32(RXFIFO_ID, 0x50)
+ FIELD(RXFIFO_ID, IDH, 21, 11)
+ FIELD(RXFIFO_ID, SRRRTR, 20, 1)
+ FIELD(RXFIFO_ID, IDE, 19, 1)
+ FIELD(RXFIFO_ID, IDL, 1, 18)
+ FIELD(RXFIFO_ID, RTR, 0, 1)
+REG32(RXFIFO_DLC, 0x54)
+ FIELD(RXFIFO_DLC, DLC, 28, 4)
+ FIELD(RXFIFO_DLC, RXT, 0, 16)
+REG32(RXFIFO_DATA1, 0x58)
+ FIELD(RXFIFO_DATA1, DB0, 24, 8)
+ FIELD(RXFIFO_DATA1, DB1, 16, 8)
+ FIELD(RXFIFO_DATA1, DB2, 8, 8)
+ FIELD(RXFIFO_DATA1, DB3, 0, 8)
+REG32(RXFIFO_DATA2, 0x5c)
+ FIELD(RXFIFO_DATA2, DB4, 24, 8)
+ FIELD(RXFIFO_DATA2, DB5, 16, 8)
+ FIELD(RXFIFO_DATA2, DB6, 8, 8)
+ FIELD(RXFIFO_DATA2, DB7, 0, 8)
+REG32(AFR, 0x60)
+ FIELD(AFR, UAF4, 3, 1)
+ FIELD(AFR, UAF3, 2, 1)
+ FIELD(AFR, UAF2, 1, 1)
+ FIELD(AFR, UAF1, 0, 1)
+REG32(AFMR1, 0x64)
+ FIELD(AFMR1, AMIDH, 21, 11)
+ FIELD(AFMR1, AMSRR, 20, 1)
+ FIELD(AFMR1, AMIDE, 19, 1)
+ FIELD(AFMR1, AMIDL, 1, 18)
+ FIELD(AFMR1, AMRTR, 0, 1)
+REG32(AFIR1, 0x68)
+ FIELD(AFIR1, AIIDH, 21, 11)
+ FIELD(AFIR1, AISRR, 20, 1)
+ FIELD(AFIR1, AIIDE, 19, 1)
+ FIELD(AFIR1, AIIDL, 1, 18)
+ FIELD(AFIR1, AIRTR, 0, 1)
+REG32(AFMR2, 0x6c)
+ FIELD(AFMR2, AMIDH, 21, 11)
+ FIELD(AFMR2, AMSRR, 20, 1)
+ FIELD(AFMR2, AMIDE, 19, 1)
+ FIELD(AFMR2, AMIDL, 1, 18)
+ FIELD(AFMR2, AMRTR, 0, 1)
+REG32(AFIR2, 0x70)
+ FIELD(AFIR2, AIIDH, 21, 11)
+ FIELD(AFIR2, AISRR, 20, 1)
+ FIELD(AFIR2, AIIDE, 19, 1)
+ FIELD(AFIR2, AIIDL, 1, 18)
+ FIELD(AFIR2, AIRTR, 0, 1)
+REG32(AFMR3, 0x74)
+ FIELD(AFMR3, AMIDH, 21, 11)
+ FIELD(AFMR3, AMSRR, 20, 1)
+ FIELD(AFMR3, AMIDE, 19, 1)
+ FIELD(AFMR3, AMIDL, 1, 18)
+ FIELD(AFMR3, AMRTR, 0, 1)
+REG32(AFIR3, 0x78)
+ FIELD(AFIR3, AIIDH, 21, 11)
+ FIELD(AFIR3, AISRR, 20, 1)
+ FIELD(AFIR3, AIIDE, 19, 1)
+ FIELD(AFIR3, AIIDL, 1, 18)
+ FIELD(AFIR3, AIRTR, 0, 1)
+REG32(AFMR4, 0x7c)
+ FIELD(AFMR4, AMIDH, 21, 11)
+ FIELD(AFMR4, AMSRR, 20, 1)
+ FIELD(AFMR4, AMIDE, 19, 1)
+ FIELD(AFMR4, AMIDL, 1, 18)
+ FIELD(AFMR4, AMRTR, 0, 1)
+REG32(AFIR4, 0x80)
+ FIELD(AFIR4, AIIDH, 21, 11)
+ FIELD(AFIR4, AISRR, 20, 1)
+ FIELD(AFIR4, AIIDE, 19, 1)
+ FIELD(AFIR4, AIIDL, 1, 18)
+ FIELD(AFIR4, AIRTR, 0, 1)
+
+static void can_update_irq(XlnxZynqMPCANState *s)
+{
+ uint32_t irq;
+
+ /* Watermark register interrupts. */
+ if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) >
+ ARRAY_FIELD_EX32(s->regs, WIR, EW)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFWMEMP, 1);
+ }
+
+ if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) >
+ ARRAY_FIELD_EX32(s->regs, WIR, FW)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXFWMFLL, 1);
+ }
+
+ /* RX Interrupts. */
+ if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXNEMP, 1);
+ }
+
+ /* TX interrupts. */
+ if (fifo32_is_empty(&s->tx_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFEMP, 1);
+ }
+
+ if (fifo32_is_full(&s->tx_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL, 1);
+ }
+
+ if (fifo32_is_full(&s->txhpb_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL, 1);
+ }
+
+ irq = s->regs[R_INTERRUPT_STATUS_REGISTER];
+ irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER];
+
+ qemu_set_irq(s->irq, irq);
+}
+
+static void can_ier_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+
+ can_update_irq(s);
+}
+
+static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val;
+ can_update_irq(s);
+
+ return 0;
+}
+
+static void can_config_reset(XlnxZynqMPCANState *s)
+{
+ /* Reset all the configuration registers. */
+ register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]);
+ register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]);
+ register_reset(
+ &s->reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]);
+ register_reset(&s->reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]);
+ register_reset(&s->reg_info[R_STATUS_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]);
+ register_reset(&s->reg_info[R_WIR]);
+}
+
+static void can_config_mode(XlnxZynqMPCANState *s)
+{
+ register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]);
+ register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]);
+
+ /* Put XlnxZynqMPCAN in configuration mode. */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST, 0);
+
+ can_update_irq(s);
+}
+
+static void update_status_register_mode_bits(XlnxZynqMPCANState *s)
+{
+ bool sleep_status = ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP);
+ bool sleep_mode = ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP);
+ /* Wake up interrupt bit. */
+ bool wakeup_irq_val = sleep_status && (sleep_mode == 0);
+ /* Sleep interrupt bit. */
+ bool sleep_irq_val = sleep_mode && (sleep_status == 0);
+
+ /* Clear previous core mode status bits. */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0);
+
+ /* set current mode bit and generate irqs accordingly. */
+ if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1);
+ } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP,
+ sleep_irq_val);
+ } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SNOOP)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1);
+ } else {
+ /*
+ * If all bits are zero then XlnxZynqMPCAN is set in normal mode.
+ */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1);
+ /* Set wakeup interrupt bit. */
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP,
+ wakeup_irq_val);
+ }
+
+ can_update_irq(s);
+}
+
+static void can_exit_sleep_mode(XlnxZynqMPCANState *s)
+{
+ ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0);
+ update_status_register_mode_bits(s);
+}
+
+static void generate_frame(qemu_can_frame *frame, uint32_t *data)
+{
+ frame->can_id = data[0];
+ frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC);
+
+ frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3);
+ frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2);
+ frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1);
+ frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0);
+
+ frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7);
+ frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6);
+ frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5);
+ frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4);
+}
+
+static bool tx_ready_check(XlnxZynqMPCANState *s)
+{
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to transfer"
+ " data while controller is in reset mode.\n",
+ s->cfg.ctrl_idx);
+ return false;
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to transfer"
+ " data while controller is in configuration mode. Reset"
+ " the core so operations can start fresh.\n",
+ s->cfg.ctrl_idx);
+ return false;
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to transfer"
+ " data while controller is in SNOOP MODE.\n",
+ s->cfg.ctrl_idx);
+ return false;
+ }
+
+ return true;
+}
+
+static void transfer_fifo(XlnxZynqMPCANState *s, Fifo32 *fifo)
+{
+ qemu_can_frame frame;
+ uint32_t data[CAN_FRAME_SIZE];
+ int i;
+ bool can_tx = tx_ready_check(s);
+
+ if (can_tx) {
+ while (!fifo32_is_empty(fifo)) {
+ for (i = 0; i < CAN_FRAME_SIZE; i++) {
+ data[i] = fifo32_pop(fifo);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
+ /*
+ * Controller is in loopback. In Loopback mode, the CAN core
+ * transmits a recessive bitstream on to the XlnxZynqMPCAN Bus.
+ * Any message transmitted is looped back to the RX line and
+ * acknowledged. The XlnxZynqMPCAN core receives any message
+ * that it transmits.
+ */
+ if (fifo32_is_full(&s->rx_fifo)) {
+ DB_PRINT("XlnxZynqMPCAN%d: Loopback: RX FIFO is full."
+ "TX FIFO will be flushed.\n", s->cfg.ctrl_idx);
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
+ RXOFLW, 1);
+ } else {
+ for (i = 0; i < CAN_FRAME_SIZE; i++) {
+ fifo32_push(&s->rx_fifo, data[i]);
+ }
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
+ RXOK, 1);
+ }
+ } else {
+ /* Normal mode Tx. */
+ generate_frame(&frame, data);
+
+ can_bus_client_send(&s->bus_client, &frame, 1);
+ }
+ }
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 1);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0);
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) {
+ can_exit_sleep_mode(s);
+ }
+ } else {
+ DB_PRINT("XlnxZynqMPCAN%d: Not enabled for data transfer.\n",
+ s->cfg.ctrl_idx);
+ }
+
+ can_update_irq(s);
+}
+
+static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN,
+ FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN));
+
+ if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) {
+ DB_PRINT("XlnxZynqMPCAN%d: Resetting controller.\n", s->cfg.ctrl_idx);
+
+ /* First, core will do software reset then will enter in config mode. */
+ can_config_reset(s);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ can_config_mode(s);
+ } else {
+ /*
+ * Leave config mode. Now XlnxZynqMPCAN core will enter normal,
+ * sleep, snoop or loopback mode depending upon LBACK, SLEEP, SNOOP
+ * register states.
+ */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0);
+
+ /* XlnxZynqMPCAN is out of config mode. It will send pending data. */
+ transfer_fifo(s, &s->txhpb_fifo);
+ transfer_fifo(s, &s->tx_fifo);
+ }
+
+ update_status_register_mode_bits(s);
+
+ return s->regs[R_SOFTWARE_RESET_REGISTER];
+}
+
+static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+ uint8_t multi_mode;
+
+ /*
+ * Multiple mode set check. This is done to make sure user doesn't set
+ * multiple modes.
+ */
+ multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) +
+ FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) +
+ FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP);
+
+ if (multi_mode > 1) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to config"
+ " several modes simultaneously. One mode will be selected"
+ " according to their priority: LBACK > SLEEP > SNOOP.\n",
+ s->cfg.ctrl_idx);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ /* We are in configuration mode, any mode can be selected. */
+ s->regs[R_MODE_SELECT_REGISTER] = val;
+ } else {
+ bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP);
+
+ ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, sleep_mode_bit);
+
+ if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to set"
+ " LBACK mode without setting CEN bit as 0.\n",
+ s->cfg.ctrl_idx);
+ } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Attempting to set"
+ " SNOOP mode without setting CEN bit as 0.\n",
+ s->cfg.ctrl_idx);
+ }
+
+ update_status_register_mode_bits(s);
+ }
+ return s->regs[R_MODE_SELECT_REGISTER];
+}
+
+static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ /* Only allow writes when in config mode. */
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ val = s->regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER];
+ }
+
+ return val;
+}
+
+static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ /* Only allow writes when in config mode. */
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ val = s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER];
+ }
+
+ return val;
+}
+
+static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) {
+ s->rx_time_stamp = 0;
+ }
+
+ return 0;
+}
+
+static void update_rx_fifo(XlnxZynqMPCANState *s, const qemu_can_frame *frame)
+{
+ bool filter_pass = false;
+
+ /* If no filter is enabled. Message will be stored in FIFO. */
+ if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) {
+ filter_pass = true;
+ }
+
+ /*
+ * Messages that pass any of the acceptance filters will be stored in
+ * the RX FIFO.
+ */
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) {
+ uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) {
+ uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) {
+ uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
+ uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ /* Store the message in fifo if it passed through any of the filters. */
+ if (filter_pass && frame->can_dlc <= MAX_DLC) {
+
+ if (fifo32_is_full(&s->rx_fifo)) {
+ DB_PRINT("XlnxZynqMPCAN%d: RX FIFO is full.\n", s->cfg.ctrl_idx);
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1);
+ } else {
+ s->rx_time_stamp += 1;
+
+ fifo32_push(&s->rx_fifo, frame->can_id);
+
+ fifo32_push(&s->rx_fifo, (deposit32(0, R_RXFIFO_DLC_DLC_SHIFT,
+ R_RXFIFO_DLC_DLC_LENGTH,
+ frame->can_dlc) |
+ deposit32(0, R_RXFIFO_DLC_RXT_SHIFT,
+ R_RXFIFO_DLC_RXT_LENGTH,
+ s->rx_time_stamp)));
+
+ /* First 32 bit of the data. */
+ fifo32_push(&s->rx_fifo, (deposit32(0, R_TXFIFO_DATA1_DB3_SHIFT,
+ R_TXFIFO_DATA1_DB3_LENGTH,
+ frame->data[0]) |
+ deposit32(0, R_TXFIFO_DATA1_DB2_SHIFT,
+ R_TXFIFO_DATA1_DB2_LENGTH,
+ frame->data[1]) |
+ deposit32(0, R_TXFIFO_DATA1_DB1_SHIFT,
+ R_TXFIFO_DATA1_DB1_LENGTH,
+ frame->data[2]) |
+ deposit32(0, R_TXFIFO_DATA1_DB0_SHIFT,
+ R_TXFIFO_DATA1_DB0_LENGTH,
+ frame->data[3])));
+ /* Last 32 bit of the data. */
+ fifo32_push(&s->rx_fifo, (deposit32(0, R_TXFIFO_DATA2_DB7_SHIFT,
+ R_TXFIFO_DATA2_DB7_LENGTH,
+ frame->data[4]) |
+ deposit32(0, R_TXFIFO_DATA2_DB6_SHIFT,
+ R_TXFIFO_DATA2_DB6_LENGTH,
+ frame->data[5]) |
+ deposit32(0, R_TXFIFO_DATA2_DB5_SHIFT,
+ R_TXFIFO_DATA2_DB5_LENGTH,
+ frame->data[6]) |
+ deposit32(0, R_TXFIFO_DATA2_DB4_SHIFT,
+ R_TXFIFO_DATA2_DB4_LENGTH,
+ frame->data[7])));
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1);
+ }
+
+ can_update_irq(s);
+ } else {
+ DB_PRINT("XlnxZynqMPCAN%d: Message didn't pass through any filter or"
+ " dlc is not in range.\n", s->cfg.ctrl_idx);
+ }
+}
+
+static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t r = 0;
+
+ if (!fifo32_is_empty(&s->rx_fifo)) {
+ r = fifo32_pop(&s->rx_fifo);
+ } else {
+ DB_PRINT("XlnxZynqMPCAN%d: No message in RXFIFO.\n", s->cfg.ctrl_idx);
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXUFLW, 1);
+ }
+
+ can_update_irq(s);
+ return r;
+}
+
+static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF2) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF3) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1);
+ } else {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0);
+ }
+}
+
+static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t reg_idx = (reg->access->addr) / 4;
+ uint32_t val = val64;
+ uint32_t filter_number = (reg_idx - R_AFMR1) / 2;
+
+ /* modify an acceptance filter, the corresponding UAF bit should be '0.' */
+ if (!(s->regs[R_AFR] & (1 << filter_number))) {
+ s->regs[reg_idx] = val;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Acceptance filter %d"
+ " mask is not set as corresponding UAF bit is not 0.\n",
+ s->cfg.ctrl_idx, filter_number + 1);
+ }
+
+ return s->regs[reg_idx];
+}
+
+static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t reg_idx = (reg->access->addr) / 4;
+ uint32_t val = val64;
+ uint32_t filter_number = (reg_idx - R_AFIR1) / 2;
+
+ if (!(s->regs[R_AFR] & (1 << filter_number))) {
+ s->regs[reg_idx] = val;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: Acceptance filter %d"
+ " id is not set as corresponding UAF bit is not 0.\n",
+ s->cfg.ctrl_idx, filter_number + 1);
+ }
+
+ return s->regs[reg_idx];
+}
+
+static void can_tx_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2;
+
+ bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) ||
+ (reg->access->addr == A_TXHPB_DATA2);
+
+ Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo;
+
+ DB_PRINT("XlnxZynqMPCAN%d: TX FIFO write.\n", s->cfg.ctrl_idx);
+
+ if (!fifo32_is_full(f)) {
+ fifo32_push(f, val);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: TX FIFO is full.\n",
+ s->cfg.ctrl_idx);
+ }
+
+ /* Initiate the message send if TX register is written. */
+ if (initiate_transfer &&
+ ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ transfer_fifo(s, f);
+ }
+
+ can_update_irq(s);
+}
+
+static const RegisterAccessInfo can_regs_info[] = {
+ { .name = "SOFTWARE_RESET_REGISTER",
+ .addr = A_SOFTWARE_RESET_REGISTER,
+ .rsvd = 0xfffffffc,
+ .pre_write = can_srr_pre_write,
+ },{ .name = "MODE_SELECT_REGISTER",
+ .addr = A_MODE_SELECT_REGISTER,
+ .rsvd = 0xfffffff8,
+ .pre_write = can_msr_pre_write,
+ },{ .name = "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER",
+ .addr = A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER,
+ .rsvd = 0xffffff00,
+ .pre_write = can_brpr_pre_write,
+ },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER",
+ .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER,
+ .rsvd = 0xfffffe00,
+ .pre_write = can_btr_pre_write,
+ },{ .name = "ERROR_COUNTER_REGISTER",
+ .addr = A_ERROR_COUNTER_REGISTER,
+ .rsvd = 0xffff0000,
+ .ro = 0xffffffff,
+ },{ .name = "ERROR_STATUS_REGISTER",
+ .addr = A_ERROR_STATUS_REGISTER,
+ .rsvd = 0xffffffe0,
+ .w1c = 0x1f,
+ },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER,
+ .reset = 0x1,
+ .rsvd = 0xffffe000,
+ .ro = 0x1fff,
+ },{ .name = "INTERRUPT_STATUS_REGISTER",
+ .addr = A_INTERRUPT_STATUS_REGISTER,
+ .reset = 0x6000,
+ .rsvd = 0xffff8000,
+ .ro = 0x7fff,
+ },{ .name = "INTERRUPT_ENABLE_REGISTER",
+ .addr = A_INTERRUPT_ENABLE_REGISTER,
+ .rsvd = 0xffff8000,
+ .post_write = can_ier_post_write,
+ },{ .name = "INTERRUPT_CLEAR_REGISTER",
+ .addr = A_INTERRUPT_CLEAR_REGISTER,
+ .rsvd = 0xffff8000,
+ .pre_write = can_icr_pre_write,
+ },{ .name = "TIMESTAMP_REGISTER",
+ .addr = A_TIMESTAMP_REGISTER,
+ .rsvd = 0xfffffffe,
+ .pre_write = can_tcr_pre_write,
+ },{ .name = "WIR", .addr = A_WIR,
+ .reset = 0x3f3f,
+ .rsvd = 0xffff0000,
+ },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC,
+ .rsvd = 0xfffffff,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC,
+ .rsvd = 0xfffffff,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2,
+ .post_write = can_tx_post_write,
+ },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID,
+ .ro = 0xffffffff,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC,
+ .rsvd = 0xfff0000,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "AFR", .addr = A_AFR,
+ .rsvd = 0xfffffff0,
+ .post_write = can_filter_enable_post_write,
+ },{ .name = "AFMR1", .addr = A_AFMR1,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR1", .addr = A_AFIR1,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR2", .addr = A_AFMR2,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR2", .addr = A_AFIR2,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR3", .addr = A_AFMR3,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR3", .addr = A_AFIR3,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR4", .addr = A_AFMR4,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR4", .addr = A_AFIR4,
+ .pre_write = can_filter_id_pre_write,
+ }
+};
+
+static const MemoryRegionOps can_ops = {
+ .read = register_read_memory,
+ .write = register_write_memory,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void xlnx_zynqmp_can_reset(DeviceState *dev)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->reg_info); ++i) {
+ register_reset(&s->reg_info[i]);
+ }
+
+ /*
+ * Reset FIFOs when CAN model is reset. This will clear the fifo writes
+ * done by post_write which gets called from register_reset function,
+ * post_write handle will not be able to trigger tx because CAN will be
+ * disabled when software_reset_register is cleared first.
+ */
+ fifo32_reset(&s->rx_fifo);
+ fifo32_reset(&s->tx_fifo);
+ fifo32_reset(&s->txhpb_fifo);
+}
+
+static bool xlnx_zynqmp_can_can_receive(CanBusClientState *client)
+{
+ XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
+ bus_client);
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
+ DB_PRINT("XlnxZynqMPCAN%d: Controller is in reset.\n", s->cfg.ctrl_idx);
+ return false;
+ } else if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) == 0) {
+ DB_PRINT("XlnxZynqMPCAN%d: Controller is disabled. Incoming messages"
+ " will be discarded.\n", s->cfg.ctrl_idx);
+ return false;
+ } else {
+ return true;
+ }
+}
+
+static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client,
+ const qemu_can_frame *buf, size_t buf_size) {
+ XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
+ bus_client);
+ const qemu_can_frame *frame = buf;
+
+ DB_PRINT("XlnxZynqMPCAN%d: Incoming data.\n", s->cfg.ctrl_idx);
+
+ if (buf_size <= 0) {
+ DB_PRINT("XlnxZynqMPCAN%d: Junk data received.\n", s->cfg.ctrl_idx);
+ return 0;
+ }
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
+ /*
+ * XlnxZynqMPCAN will not participate in normal bus communication
+ * and will not receive any messages transmitted by other CAN nodes.
+ */
+ DB_PRINT("XlnxZynqMPCAN%d: Controller is in loopback mode. It will not"
+ " receive data.\n", s->cfg.ctrl_idx);
+
+ } else if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
+ /* Snoop Mode: Just keep the data. no response back. */
+ update_rx_fifo(s, frame);
+ } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) {
+ /*
+ * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it to wake
+ * up state.
+ */
+ can_exit_sleep_mode(s);
+ update_rx_fifo(s, frame);
+ } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0) {
+ update_rx_fifo(s, frame);
+ } else {
+ DB_PRINT("XlnxZynqMPCAN%d: Cannot receive data as controller is not"
+ " configured correctly.\n", s->cfg.ctrl_idx);
+ }
+
+ return 1;
+}
+
+static CanBusClientInfo can_xilinx_bus_client_info = {
+ .can_receive = xlnx_zynqmp_can_can_receive,
+ .receive = xlnx_zynqmp_can_receive,
+};
+
+static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCANState *s,
+ CanBusState *bus)
+{
+ s->bus_client.info = &can_xilinx_bus_client_info;
+
+ if (can_bus_insert_client(bus, &s->bus_client) < 0) {
+ return -1;
+ }
+ return 0;
+}
+
+static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev);
+
+ if (s->cfg.ctrl_idx >= MAX_CAN_CTRLS) {
+ error_setg(errp, "XlnxZynqMPCAN%d: ctrl-idx exceeds max controller"
+ " index.", s->cfg.ctrl_idx);
+ return;
+ }
+
+ if (s->canbus[s->cfg.ctrl_idx]) {
+ if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus[s->cfg.ctrl_idx]) < 0) {
+ error_setg(errp, "XlnxZynqMPCAN%d: xlnx_zynqmp_can_connect_to_bus"
+ " failed.", s->cfg.ctrl_idx);
+ return;
+ }
+
+ } else {
+ /* If no bus is set. */
+ DB_PRINT("XlnxZynqMPCAN%d: Canbus property is not set.\n",
+ s->cfg.ctrl_idx);
+ }
+
+ /* Create RX FIFO, TXFIFO, TXHPB storage. */
+ fifo32_create(&s->rx_fifo, RXFIFO_SIZE);
+ fifo32_create(&s->tx_fifo, RXFIFO_SIZE);
+ fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE);
+}
+
+static void xlnx_zynqmp_can_init(Object *obj)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ RegisterInfoArray *reg_array;
+
+ memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN,
+ XLNX_ZYNQMP_CAN_R_MAX * 4);
+ reg_array = register_init_block32(DEVICE(obj), can_regs_info,
+ ARRAY_SIZE(can_regs_info),
+ s->reg_info, s->regs,
+ &can_ops,
+ XLNX_ZYNQMP_CAN_ERR_DEBUG,
+ XLNX_ZYNQMP_CAN_R_MAX * 4);
+
+ memory_region_add_subregion(&s->iomem, 0x00, ®_array->mem);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ object_property_add_link(obj, "canbus0", TYPE_CAN_BUS,
+ (Object **)&s->canbus[0],
+ qdev_prop_allow_set_link_before_realize,
+ 0);
+
+ object_property_add_link(obj, "canbus1", TYPE_CAN_BUS,
+ (Object **)&s->canbus[1],
+ qdev_prop_allow_set_link_before_realize,
+ 0);
+}
+
+static const VMStateDescription vmstate_can = {
+ .name = TYPE_XLNX_ZYNQMP_CAN,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCANState),
+ VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCANState, XLNX_ZYNQMP_CAN_R_MAX),
+ VMSTATE_UINT8(cfg.ctrl_idx, XlnxZynqMPCANState),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
+static Property xlnx_zynqmp_can_properties[] = {
+ DEFINE_PROP_UINT8("ctrl-idx", XlnxZynqMPCANState, cfg.ctrl_idx, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = xlnx_zynqmp_can_reset;
+ dc->realize = xlnx_zynqmp_can_realize;
+ device_class_set_props(dc, xlnx_zynqmp_can_properties);
+ dc->vmsd = &vmstate_can;
+}
+
+static const TypeInfo can_info = {
+ .name = TYPE_XLNX_ZYNQMP_CAN,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(XlnxZynqMPCANState),
+ .class_init = xlnx_zynqmp_can_class_init,
+ .instance_init = xlnx_zynqmp_can_init,
+};
+
+static void can_register_types(void)
+{
+ type_register_static(&can_info);
+}
+
+type_init(can_register_types)
new file mode 100644
@@ -0,0 +1,75 @@
+/*
+ * QEMU model of the Xilinx ZynqMP CAN controller.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and
+ * Pavel Pisa.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef XLNX_ZYNQMP_CAN_H
+#define XLNX_ZYNQMP_CAN_H
+
+#include "hw/register.h"
+#include "net/can_emu.h"
+#include "net/can_host.h"
+#include "qemu/fifo32.h"
+
+#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can"
+
+#define XLNX_ZYNQMP_CAN(obj) \
+ OBJECT_CHECK(XlnxZynqMPCANState, (obj), TYPE_XLNX_ZYNQMP_CAN)
+
+#define MAX_CAN_CTRLS 2
+#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4)
+#define MAILBOX_CAPACITY 64
+
+/* Each CAN_FRAME will have 4 * 32bit size. */
+#define CAN_FRAME_SIZE 4
+#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE)
+
+typedef struct XlnxZynqMPCANState {
+ SysBusDevice parent_obj;
+ MemoryRegion iomem;
+
+ qemu_irq irq;
+
+ CanBusClientState bus_client;
+ CanBusState *canbus[MAX_CAN_CTRLS];
+
+ struct {
+ uint8_t ctrl_idx;
+ } cfg;
+
+ RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX];
+ uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX];
+
+ uint16_t rx_time_stamp;
+
+ Fifo32 rx_fifo;
+ Fifo32 tx_fifo;
+ Fifo32 txhpb_fifo;
+
+} XlnxZynqMPCANState;
+
+#endif
The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus implementation. Bus connection and socketCAN connection for each CAN module can be set through command lines. Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com> --- hw/net/can/Makefile.objs | 1 + hw/net/can/xlnx-zynqmp-can.c | 1116 ++++++++++++++++++++++++++++++++++++++ include/hw/net/xlnx-zynqmp-can.h | 75 +++ 3 files changed, 1192 insertions(+) create mode 100644 hw/net/can/xlnx-zynqmp-can.c create mode 100644 include/hw/net/xlnx-zynqmp-can.h