diff mbox series

[08/10] hw/char: remove sh_serial.c

Message ID 20200531162427.57410-9-ysato@users.sourceforge.jp
State New
Headers show
Series None | expand

Commit Message

Yoshinori Sato May 31, 2020, 4:24 p.m. UTC
SH4 SCI module convert to renesas_sci.c.
This file is obsolute.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 hw/char/sh_serial.c | 431 --------------------------------------------
 1 file changed, 431 deletions(-)
 delete mode 100644 hw/char/sh_serial.c
diff mbox series

Patch

diff --git a/hw/char/sh_serial.c b/hw/char/sh_serial.c
deleted file mode 100644
index 167f4d8cb9..0000000000
--- a/hw/char/sh_serial.c
+++ /dev/null
@@ -1,431 +0,0 @@ 
-/*
- * QEMU SCI/SCIF serial port emulation
- *
- * Copyright (c) 2007 Magnus Damm
- *
- * Based on serial.c - QEMU 16450 UART emulation
- * Copyright (c) 2003-2004 Fabrice Bellard
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "qemu/osdep.h"
-#include "hw/irq.h"
-#include "hw/sh4/sh.h"
-#include "chardev/char-fe.h"
-#include "qapi/error.h"
-#include "qemu/timer.h"
-
-//#define DEBUG_SERIAL
-
-#define SH_SERIAL_FLAG_TEND (1 << 0)
-#define SH_SERIAL_FLAG_TDE  (1 << 1)
-#define SH_SERIAL_FLAG_RDF  (1 << 2)
-#define SH_SERIAL_FLAG_BRK  (1 << 3)
-#define SH_SERIAL_FLAG_DR   (1 << 4)
-
-#define SH_RX_FIFO_LENGTH (16)
-
-typedef struct {
-    MemoryRegion iomem;
-    MemoryRegion iomem_p4;
-    MemoryRegion iomem_a7;
-    uint8_t smr;
-    uint8_t brr;
-    uint8_t scr;
-    uint8_t dr; /* ftdr / tdr */
-    uint8_t sr; /* fsr / ssr */
-    uint16_t fcr;
-    uint8_t sptr;
-
-    uint8_t rx_fifo[SH_RX_FIFO_LENGTH]; /* frdr / rdr */
-    uint8_t rx_cnt;
-    uint8_t rx_tail;
-    uint8_t rx_head;
-
-    int freq;
-    int feat;
-    int flags;
-    int rtrg;
-
-    CharBackend chr;
-    QEMUTimer *fifo_timeout_timer;
-    uint64_t etu; /* Elementary Time Unit (ns) */
-
-    qemu_irq eri;
-    qemu_irq rxi;
-    qemu_irq txi;
-    qemu_irq tei;
-    qemu_irq bri;
-} sh_serial_state;
-
-static void sh_serial_clear_fifo(sh_serial_state * s)
-{
-    memset(s->rx_fifo, 0, SH_RX_FIFO_LENGTH);
-    s->rx_cnt = 0;
-    s->rx_head = 0;
-    s->rx_tail = 0;
-}
-
-static void sh_serial_write(void *opaque, hwaddr offs,
-                            uint64_t val, unsigned size)
-{
-    sh_serial_state *s = opaque;
-    unsigned char ch;
-
-#ifdef DEBUG_SERIAL
-    printf("sh_serial: write offs=0x%02x val=0x%02x\n",
-           offs, val);
-#endif
-    switch(offs) {
-    case 0x00: /* SMR */
-        s->smr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0x7b : 0xff);
-        return;
-    case 0x04: /* BRR */
-        s->brr = val;
-        return;
-    case 0x08: /* SCR */
-        /* TODO : For SH7751, SCIF mask should be 0xfb. */
-        s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff);
-        if (!(val & (1 << 5)))
-            s->flags |= SH_SERIAL_FLAG_TEND;
-        if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) {
-            qemu_set_irq(s->txi, val & (1 << 7));
-        }
-        if (!(val & (1 << 6))) {
-            qemu_set_irq(s->rxi, 0);
-        }
-        return;
-    case 0x0c: /* FTDR / TDR */
-        if (qemu_chr_fe_backend_connected(&s->chr)) {
-            ch = val;
-            /* XXX this blocks entire thread. Rewrite to use
-             * qemu_chr_fe_write and background I/O callbacks */
-            qemu_chr_fe_write_all(&s->chr, &ch, 1);
-        }
-        s->dr = val;
-        s->flags &= ~SH_SERIAL_FLAG_TDE;
-        return;
-#if 0
-    case 0x14: /* FRDR / RDR */
-        ret = 0;
-        break;
-#endif
-    }
-    if (s->feat & SH_SERIAL_FEAT_SCIF) {
-        switch(offs) {
-        case 0x10: /* FSR */
-            if (!(val & (1 << 6)))
-                s->flags &= ~SH_SERIAL_FLAG_TEND;
-            if (!(val & (1 << 5)))
-                s->flags &= ~SH_SERIAL_FLAG_TDE;
-            if (!(val & (1 << 4)))
-                s->flags &= ~SH_SERIAL_FLAG_BRK;
-            if (!(val & (1 << 1)))
-                s->flags &= ~SH_SERIAL_FLAG_RDF;
-            if (!(val & (1 << 0)))
-                s->flags &= ~SH_SERIAL_FLAG_DR;
-
-            if (!(val & (1 << 1)) || !(val & (1 << 0))) {
-                if (s->rxi) {
-                    qemu_set_irq(s->rxi, 0);
-                }
-            }
-            return;
-        case 0x18: /* FCR */
-            s->fcr = val;
-            switch ((val >> 6) & 3) {
-            case 0:
-                s->rtrg = 1;
-                break;
-            case 1:
-                s->rtrg = 4;
-                break;
-            case 2:
-                s->rtrg = 8;
-                break;
-            case 3:
-                s->rtrg = 14;
-                break;
-            }
-            if (val & (1 << 1)) {
-                sh_serial_clear_fifo(s);
-                s->sr &= ~(1 << 1);
-            }
-
-            return;
-        case 0x20: /* SPTR */
-            s->sptr = val & 0xf3;
-            return;
-        case 0x24: /* LSR */
-            return;
-        }
-    }
-    else {
-        switch(offs) {
-#if 0
-        case 0x0c:
-            ret = s->dr;
-            break;
-        case 0x10:
-            ret = 0;
-            break;
-#endif
-        case 0x1c:
-            s->sptr = val & 0x8f;
-            return;
-        }
-    }
-
-    fprintf(stderr, "sh_serial: unsupported write to 0x%02"
-            HWADDR_PRIx "\n", offs);
-    abort();
-}
-
-static uint64_t sh_serial_read(void *opaque, hwaddr offs,
-                               unsigned size)
-{
-    sh_serial_state *s = opaque;
-    uint32_t ret = ~0;
-
-#if 0
-    switch(offs) {
-    case 0x00:
-        ret = s->smr;
-        break;
-    case 0x04:
-        ret = s->brr;
-        break;
-    case 0x08:
-        ret = s->scr;
-        break;
-    case 0x14:
-        ret = 0;
-        break;
-    }
-#endif
-    if (s->feat & SH_SERIAL_FEAT_SCIF) {
-        switch(offs) {
-        case 0x00: /* SMR */
-            ret = s->smr;
-            break;
-        case 0x08: /* SCR */
-            ret = s->scr;
-            break;
-        case 0x10: /* FSR */
-            ret = 0;
-            if (s->flags & SH_SERIAL_FLAG_TEND)
-                ret |= (1 << 6);
-            if (s->flags & SH_SERIAL_FLAG_TDE)
-                ret |= (1 << 5);
-            if (s->flags & SH_SERIAL_FLAG_BRK)
-                ret |= (1 << 4);
-            if (s->flags & SH_SERIAL_FLAG_RDF)
-                ret |= (1 << 1);
-            if (s->flags & SH_SERIAL_FLAG_DR)
-                ret |= (1 << 0);
-
-            if (s->scr & (1 << 5))
-                s->flags |= SH_SERIAL_FLAG_TDE | SH_SERIAL_FLAG_TEND;
-
-            break;
-        case 0x14:
-            if (s->rx_cnt > 0) {
-                ret = s->rx_fifo[s->rx_tail++];
-                s->rx_cnt--;
-                if (s->rx_tail == SH_RX_FIFO_LENGTH)
-                    s->rx_tail = 0;
-                if (s->rx_cnt < s->rtrg)
-                    s->flags &= ~SH_SERIAL_FLAG_RDF;
-            }
-            break;
-        case 0x18:
-            ret = s->fcr;
-            break;
-        case 0x1c:
-            ret = s->rx_cnt;
-            break;
-        case 0x20:
-            ret = s->sptr;
-            break;
-        case 0x24:
-            ret = 0;
-            break;
-        }
-    }
-    else {
-        switch(offs) {
-#if 0
-        case 0x0c:
-            ret = s->dr;
-            break;
-        case 0x10:
-            ret = 0;
-            break;
-        case 0x14:
-            ret = s->rx_fifo[0];
-            break;
-#endif
-        case 0x1c:
-            ret = s->sptr;
-            break;
-        }
-    }
-#ifdef DEBUG_SERIAL
-    printf("sh_serial: read offs=0x%02x val=0x%x\n",
-           offs, ret);
-#endif
-
-    if (ret & ~((1 << 16) - 1)) {
-        fprintf(stderr, "sh_serial: unsupported read from 0x%02"
-                HWADDR_PRIx "\n", offs);
-        abort();
-    }
-
-    return ret;
-}
-
-static int sh_serial_can_receive(sh_serial_state *s)
-{
-    return s->scr & (1 << 4);
-}
-
-static void sh_serial_receive_break(sh_serial_state *s)
-{
-    if (s->feat & SH_SERIAL_FEAT_SCIF)
-        s->sr |= (1 << 4);
-}
-
-static int sh_serial_can_receive1(void *opaque)
-{
-    sh_serial_state *s = opaque;
-    return sh_serial_can_receive(s);
-}
-
-static void sh_serial_timeout_int(void *opaque)
-{
-    sh_serial_state *s = opaque;
-
-    s->flags |= SH_SERIAL_FLAG_RDF;
-    if (s->scr & (1 << 6) && s->rxi) {
-        qemu_set_irq(s->rxi, 1);
-    }
-}
-
-static void sh_serial_receive1(void *opaque, const uint8_t *buf, int size)
-{
-    sh_serial_state *s = opaque;
-
-    if (s->feat & SH_SERIAL_FEAT_SCIF) {
-        int i;
-        for (i = 0; i < size; i++) {
-            if (s->rx_cnt < SH_RX_FIFO_LENGTH) {
-                s->rx_fifo[s->rx_head++] = buf[i];
-                if (s->rx_head == SH_RX_FIFO_LENGTH) {
-                    s->rx_head = 0;
-                }
-                s->rx_cnt++;
-                if (s->rx_cnt >= s->rtrg) {
-                    s->flags |= SH_SERIAL_FLAG_RDF;
-                    if (s->scr & (1 << 6) && s->rxi) {
-                        timer_del(s->fifo_timeout_timer);
-                        qemu_set_irq(s->rxi, 1);
-                    }
-                } else {
-                    timer_mod(s->fifo_timeout_timer,
-                        qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 15 * s->etu);
-                }
-            }
-        }
-    } else {
-        s->rx_fifo[0] = buf[0];
-    }
-}
-
-static void sh_serial_event(void *opaque, QEMUChrEvent event)
-{
-    sh_serial_state *s = opaque;
-    if (event == CHR_EVENT_BREAK)
-        sh_serial_receive_break(s);
-}
-
-static const MemoryRegionOps sh_serial_ops = {
-    .read = sh_serial_read,
-    .write = sh_serial_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-void sh_serial_init(MemoryRegion *sysmem,
-                    hwaddr base, int feat,
-                    uint32_t freq, Chardev *chr,
-                    qemu_irq eri_source,
-                    qemu_irq rxi_source,
-                    qemu_irq txi_source,
-                    qemu_irq tei_source,
-                    qemu_irq bri_source)
-{
-    sh_serial_state *s;
-
-    s = g_malloc0(sizeof(sh_serial_state));
-
-    s->feat = feat;
-    s->flags = SH_SERIAL_FLAG_TEND | SH_SERIAL_FLAG_TDE;
-    s->rtrg = 1;
-
-    s->smr = 0;
-    s->brr = 0xff;
-    s->scr = 1 << 5; /* pretend that TX is enabled so early printk works */
-    s->sptr = 0;
-
-    if (feat & SH_SERIAL_FEAT_SCIF) {
-        s->fcr = 0;
-    }
-    else {
-        s->dr = 0xff;
-    }
-
-    sh_serial_clear_fifo(s);
-
-    memory_region_init_io(&s->iomem, NULL, &sh_serial_ops, s,
-                          "serial", 0x100000000ULL);
-
-    memory_region_init_alias(&s->iomem_p4, NULL, "serial-p4", &s->iomem,
-                             0, 0x28);
-    memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4);
-
-    memory_region_init_alias(&s->iomem_a7, NULL, "serial-a7", &s->iomem,
-                             0, 0x28);
-    memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7);
-
-    if (chr) {
-        qemu_chr_fe_init(&s->chr, chr, &error_abort);
-        qemu_chr_fe_set_handlers(&s->chr, sh_serial_can_receive1,
-                                 sh_serial_receive1,
-                                 sh_serial_event, NULL, s, NULL, true);
-    }
-
-    s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
-                                         sh_serial_timeout_int, s);
-    s->etu = NANOSECONDS_PER_SECOND / 9600;
-    s->eri = eri_source;
-    s->rxi = rxi_source;
-    s->txi = txi_source;
-    s->tei = tei_source;
-    s->bri = bri_source;
-}